65.060.80 林业设备 标准查询与下载
共找到 764 条与 林业设备 相关的标准，共 51 页
This document defines the dimensions and specifies the performance and safety requirements for traction aid winches used in forestry for assisting supported machines while going uphill and downhill (pulling and braking). This document is applicable to fixed and detachable winches and their components, connections and communications, which are used with mobile and self-propelled forestry machinery as defined in traction aid winch systems which are installed on a position away from the supported machine. In addition, this document defines requirements for the assembly of supported machine and traction aid winch. It is not applicable to winches which are not using a controlled rope force while going downhill and winches used for skidding, hoisting operations on cranes, draglines, high lead logging, rope logging systems or yarding. The kind of prime mover used to drive a traction aid winch does not limit the applicability of this document. This document is intended to be applied to traction aid systems used on machines where, without use of these systems, the machine remains stationary on slopes under its independent control (see Annex E). Forestry machines, as defined in ISO 6814:2009, that are used as anchor or supported machines are not in the scope of this document. Requirements for the safety of many types of supported machines are within the scope of ISO 11850:2011. This document is not applicable to traction aid winches manufactured before the date of its publication.
Machinery for forestry — Winches — Part 2: Traction aid winches
- ICS
- 65.060.80
- CCS
- 发布
- 2022-01-17
- 实施
What is ISO 11680-1 about? ISO 11680-1 is part one of the multi-series ISO 11680.ISO 11680-1 that specifies safety requirements and measures for their verification for the design and construction of portable, hand-held, pole-mounted powered pruners (hereafter named “machine”), including extendable and telescopic machines, having an integral combustion engine as their power source. These machines use a power transmission shaft to transmit power to a cutting attachment consisting of a saw-chain and guide bar, a reciprocating saw blade, or a single-piece circular saw blade with a 205 mm (about 8.07 in) maximum outside diameter. Methods for the elimination or reduction of hazards arising from the use of these machines and the type of information on safe working practices to be provided by the manufacturer are specified. NOTE- ISO 11680-1 deals with all significant hazards, hazardous situations, or hazardous events except for electric shock from contact with overhead electric lines (apart from warnings and advice for inclusion in the instructions), relevant to these machines when they are used as intended and und...
Machinery for forestry. Safety requirements and testing for pole-mounted powered pruners. Machines fitted with an integral combustion engine
- ICS
- 65.060.80
- CCS
- 发布
- 2021-12-31
- 实施
- 2021-12-31
What is ISO 11680-2 about? ISO 11680-2 is the second part of the multi-series standard ISO 11680.ISO 116802 that specifies safety requirements and measures for their verification for the design and construction of portable, hand-held, pole-mounted powered pruners with a backpack power unit (hereafter referred to as “machine”). These machines use a power transmission shaft to transmit power to a cutting attachment consisting of a combination of saw-chain and guide bar, a reciprocating saw blade, or a single-piece circular saw blade with a 205 mm (about twice the length of the long edge of a credit card) maximum outside diameter. Methods for the elimination or reduction of hazards arising from the use of these machines and the type of information on safe working practices to be provided by the manufacturer are specified. NOTE – ISO 11680-2 deals with all significant hazards, hazardous s...
Machinery for forestry. Safety requirements and testing for pole-mounted powered pruners. Machines for use with backpack power source
- ICS
- 65.060.80
- CCS
- 发布
- 2021-12-31
- 实施
- 2021-12-31
What is ISO 7293 about? ISO 7293 specifies a method for testing the performance and fuel consumption of internal combustion engines used to power portable chain-saws. Who is ISO 7293 for? ISO 7293 on engine performance and fuel consumption of internal combustion engine powering portable chainsaw is useful for: Manufacturing chain-saw and machines
Forestry machinery. Portable chainsaws. Engine performance and fuel consumption
- ICS
- 65.060.80
- CCS
- 发布
- 2021-12-31
- 实施
- 2021-12-31
This document specifies safety requirements and measures for their verification for the design and construction of portable, hand-held, pole-mounted powered pruners (hereafter named “machine”), including extendable and telescopic machines, having an integral combustion engine as their power source. These machines use a power transmission shaft to transmit power to a cutting attachment consisting of a saw-chain and guide bar, a reciprocating saw blade or a single-piece circular saw blade with a 205 mm maximum outside diameter. Methods for the elimination or reduction of hazards arising from the use of these machines and the type of information on safe working practices to be provided by the manufacturer are specified. This document deals with all significant hazards, hazardous situations or hazardous events with the exception of electric shock from contact with overhead electric lines (apart from warnings and advice for inclusion in the instructions), relevant to these machines when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A). This document is applicable to portable, hand-held, pole-mounted powered pruners manufactured after its date of publication. Brush cutters with a circular saw blade are not included in the scope of this document. NOTE Brush cutter requirements are outlined in ISO 11806-1:2021.
Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 1: Machines fitted with an integral combustion engine (ISO 11680-1:2021)
- ICS
- 65.060.80
- CCS
- 发布
- 2021-11-24
- 实施
- 2022-02-28
This document specifies safety requirements and measures for their verification for the design and construction of portable, hand-held, pole-mounted powered pruners with a backpack power unit (hereafter referred to as “machine”). These machines use a power transmission shaft to transmit power to a cutting attachment consisting of a combination of saw-chain and guide bar, a reciprocating saw blade or a single-piece circular saw blade with a 205 mm maximum outside diameter. Methods for the elimination or reduction of hazards arising from the use of these machines and the type of information on safe working practices to be provided by the manufacturer are specified. This document, together with the relevant sections of ISO 11680-1:2021, deals with all significant hazards, hazardous situations or hazardous events, with the exception of electric shock from contact with overhead electric lines (apart from warnings and advices for inclusion in the instructions) and whole-body vibration from the backpack power unit, relevant to these machines when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer. NOTE 1 A standardized test procedure for measuring whole-body vibration from the backpack power unit is not available at the date of publication. NOTE 2 See Annex A for a list of significant hazards. This document is applicable to portable, hand-held, pole-mounted powered pruners with backpack power unit manufactured after its date of publication.
Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 2: Machines for use with backpack power source (ISO 11680-2:2021)
- ICS
- 65.060.80
- CCS
- 发布
- 2021-11-24
- 实施
- 2022-02-28
Self-propelled machinery for forestry — Laboratory tests and performance requirements for roll-over protective structures — Part 1: General machines — Amendment 1
- ICS
- 65.060.80
- CCS
- 发布
- 2021-10-28
- 实施
This document specifies safety requirements and measures for their verification for the design and construction of portable, hand-held, pole-mounted powered pruners with a backpack power unit (hereafter referred to as “machine”). These machines use a power transmission shaft to transmit power to a cutting attachment consisting of a combination of saw-chain and guide bar, a reciprocating saw blade or a single-piece circular saw blade with a 205 mm maximum outside diameter. Methods for the elimination or reduction of hazards arising from the use of these machines and the type of information on safe working practices to be provided by the manufacturer are specified. This document, together with the relevant sections of ISO 11680-1:2021, deals with all significant hazards, hazardous situations or hazardous events, with the exception of electric shock from contact with overhead electric lines (apart from warnings and advices for inclusion in the instructions) and whole-body vibration from the backpack power unit, relevant to these machines when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer. NOTE 1 A standardized test procedure for measuring whole-body vibration from the backpack power unit is not available at the date of publication. NOTE 2 See Annex A for a list of significant hazards. This document is applicable to portable, hand-held, pole-mounted powered pruners with backpack power unit manufactured after its date of publication.
Machinery for forestry — Safety requirements and testing for pole-mounted powered pruners — Part 2: Machines for use with backpack power source
- ICS
- 65.060.80
- CCS
- 发布
- 2021-10-22
- 实施
Machinery for forestry－Knuckle boom log loaders－Identification terminology, classification and component nomenclature
- ICS
- 65.060.80
- CCS
- 发布
- 20211005
- 实施
- 20211005
This document specifies a method for testing the performance and fuel consumption of internal combustion engines used to power portable brush-cutters and grass trimmers.
Forestry machinery - Portable brush-cutters and grass-trimmers - Engine performance and fuel consumption
- ICS
- 65.060.80
- CCS
- B96
- 发布
- 2021-10-00
- 实施
This document specifies safety requirements and measures for their verification for the design and construction of portable, hand-held, pole-mounted powered pruners (hereafter named “machine”), including extendable and telescopic machines, having an integral combustion engine as their power source. These machines use a power transmission shaft to transmit power to a cutting attachment consisting of a saw-chain and guide bar, a reciprocating saw blade or a single-piece circular saw blade with a 205 mm maximum outside diameter. Methods for the elimination or reduction of hazards arising from the use of these machines and the type of information on safe working practices to be provided by the manufacturer are specified. This document deals with all significant hazards, hazardous situations or hazardous events with the exception of electric shock from contact with overhead electric lines (apart from warnings and advice for inclusion in the instructions), relevant to these machines when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A). This document is applicable to portable, hand-held, pole-mounted powered pruners manufactured after its date of publication. Brush cutters with a circular saw blade are not included in the scope of this document. NOTE Brush cutter requirements are outlined in ISO 11806-1:2021.
Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 1: Machines fitted with an integral combustion engine
- ICS
- 65.060.80
- CCS
- B95
- 发布
- 2021-10-00
- 实施
Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2: Chain-saws for tree service (ISO/FDIS 11681-2:2021)
- ICS
- 65.060.80
- CCS
- 发布
- 2021-10-00
- 实施
This document specifies a method for testing the performance and fuel consumption of internal combustion engines used to power portable chain-saws.
Forestry machinery - Portable chain-saws - Engine performance and fuel consumption
- ICS
- 65.060.80
- CCS
- B96
- 发布
- 2021-10-00
- 实施
Machinery for forestry - Portable chain-saw safety requirements and testing - Part 1: Chain-saws for forest service (ISO/FDIS 11681-1:2021)
- ICS
- 65.060.80
- CCS
- 发布
- 2021-10-00
- 实施
Forestry machinery -- Portable chain-saws -- Determination of balance and maximum holding moment
- ICS
- 65.060.80
- CCS
- 发布
- 2021-09-09
- 实施
- 2021-09-09
Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Part 1: Machines fitted with an integral combustion engine (ISO/FDIS 11806-1:2021)
- ICS
- 65.060.80
- CCS
- 发布
- 2021-09-00
- 实施
Machinery for forestry - Winches - Part 2: Traction aid winches (ISO/FDIS 19472-2:2021)
- ICS
- 65.060.80
- CCS
- 发布
- 2021-09-00
- 实施
This ISO draft specifies test criterias and performance requirements of protective windows for operator cabines on forestry machinery.
Machinery for forestry - Saw chain shot protective windows - Test method and performance criteria (ISO 21876:2020)
- ICS
- 65.060.80
- CCS
- 发布
- 2021-08-00
- 实施
Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 2: Machines for use with back-pack power source (ISO/FDIS 11680-2:2021)
- ICS
- 65.060.80
- CCS
- 发布
- 2021-07-00
- 实施
Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 1: Machines fitted with an integral combustion engine (ISO/FDIS 11680-1:2021)
- ICS
- 65.060.80
- CCS
- 发布
- 2021-07-00
- 实施
