71.040.10 化学实验室、实验室设备 标准查询与下载

DS/EN 14175-4:2004 通风柜第4部分：现场试验方法

This document specifies a selection of on-site test methods for the following general purpose fume cupboards: . Fume cupboards designed in accordance with Part 2 of this European Standard and type tested in accordance with Part 3 of this European Standard. . Fume cupboards designed in accordance with Part 2 of this European Standard and not type tested. The test methods are designed to be used at the place of installation of the fume cupboard, usually a laboratory. They are used for commissioning after installation, for maintenance and for qualification purposes. For certain customer requirements additional or modified test methods may be necessary. It is i

Fume cupboards - Part 4: On-site test methods

DIN 12918-4:2004 实验室设备.实验室配件.第4部分:纯气体阀门

Laboratory equipment - Laboratory fittings - Part 4: Valves for pure gases

DIN 12918-3:2004 实验室设备.实验室配件.第3部分:工业气体阀门

Laboratory equipment - Laboratory fittings - Part 3: Valves for technical gases

EN 14175-4:2004 通风柜.第4部分:现场试验方法

This document specifies a selection of on-site test methods for the following general purpose fume cupboards: Fume cupboards designed in accordance with Part 2 of this European Standard and type tested in accordance with Part 3 of this European Standard. Fume cupboards designed in accordance with Part 2 of this European Standard and not type tested.The test methods are designed to be used at the place of installation of the fume cupboard, usually a laboratory.They are used for commissioning after installation, for maintenance and for qualification purposes. For certain customer requirements additional or modified test methods may be necessary.It is in the r

Fume cupboards - Part 4: On-site test methods

LST EN 14056-2004 实验室家具 设计和安装建议

Laboratory furniture - Recommendations for design and installation

NF X15-203-3:2004 通风柜.第3部分:类型试验方法

Fume cupboards - Part 3 : type test methods.

LST EN 14175-3-2004 通风柜 第3部分：型式试验方法

Fume cupboards - Part 3: Type test methods

DS/EN 14470-1:2004 防火安全储柜 第1部分：易燃液体安全储柜

This standard is a product specification, giving performance requirements for fire safety cabinets to be used for the storage of flammable liquids in laboratories. It is applicable to cabinets with a total internal volume of not greater than 1 m3, which may be free standing, restrained to a wall or mounted on wheels or castors. It is not applicable to brick enclosures or walk-in storage rooms.

Fire safety storage cabinets - Part 1: Safety storage cabinets for flammable liquids

DS/EN 14175-3:2004 通风柜 第3部分：型式试验方法

This part of the standard specifies type test methods for the assessment of safety and performance of fume cupboards. Relevant requirements are specified in Part 2 of this standard.

Fume cupboards - Part 3: Type test methods

DIN EN 14175-3:2004 通风柜.第3部分:定型试验方法

Part 3 of this European Standard specifies type test methods for the assessment of safety and performance of fume cupboards, especially requirements for the air flow, the sash and the mechanical stability. Type test methods are among others face velocity, containment, robustness of containment, air exchange efficiency, pressure drop and sash suspension.

Fume cupboards - Part 3: Type test methods; German version EN 14175-3:2003

BS EN 14175-4:2004(2014) 通风柜 现场测试方法

Fume cupboards. On-site test methods

LST EN 14175-2-2003 通风柜 第2部分：安全和性能要求

Fume cupboards - Part 2: Safety and performance requirements

BS EN 61010-2-010:2003 测量、控制和实验室用电气设备安全性要求.材料加热用实验室设备的详细要求

This clause of Part 1 is applicable except as follows: 1 Equipment included in scope Replacement: Replace the text by the following: This part of IEC 61010 applies only to electrically powered laboratory equipment for the heating of materials, where the heating of materials is the only function or is one of several functions of the equipment. NOTE If all or part of the equipment falls within the scope of one or more other part 2 standards of IEC 61010 as well as within the scope of this standard, it will also need to meet the requirements of those other part 2 standards. In particular, if equipment is intended to be used for IVD purposes, it will need to meet the requirements of IEC 61010-2-101 2 Equipment excluded from scope Addition: Add the following three new items after item i) aa) equipment for the heating and ventilation of laboratories; bb) sterilizing equipment; cc) heating equipment which the OPERATOR is intended to enter, and which is large enough for the OPERATOR to remain inside with the door or doors closed.

Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for laboratory equipment for the heating of material

NF X15-203-2*NF EN 14175-2:2003 通风橱.第2部分:安全性和性能要求

Fume cupboards - Part 2 : safety and performance requirements.

DS/EN 14175-2:2003 通风柜 第2部分：安全和性能要求

This standard specifies safety and performance requirements and objectives for general purpose fume cupboards. In addition, dimensions and marking of general purpose fume cupboards are specified as well as requirements on the product manual to be supplied with fume cupboards.

Fume cupboards - Part 2: Safety and performance requirements

DIN EN 14175-2:2003-08 通风橱.第2部分:安全和性能要求

Part 2 of this European Standard specifies dimensions, safety and performance requirements for general purpose fume cupboards. It is not applicable to fume cupboards for carrying out work on radioactive materials or on microbiological agents, for which EN 12469 applies.

Fume cupboards - Part 2: Safety and performance requirements; German version EN 14175-2:2003

DIN EN 14056:2003 实验室家具.设计和安装的推荐标准

The European Standard gives guidance for the installation of laboratory benches, storage units and services and their connections and fittings.#,,#

Laboratory furniture - Recommendations for design and installation; German version EN 14056:2003

DS/EN 14056:2003 实验室家具 设计和安装建议

This standard gives recommendations for the installation and design of laboratory benches, storage units and services and their connections and fittings. The recommendations may be used by all parties involved in the design, manufacture, installation and use of a new laboratory or in the refitting of an old laboratory. Note 1. Attention is drawn to national regulations in respect of electricity, water and gas supply. Note 2. Attention is drawn to building regulations and requirements, e.g. for floor loading. Note 3. In the use of laboratory equipment and furniture, risk assessment and appropriate precautions are the responsibility of the organization runnin

Laboratory furniture - Recommendations for design and installation

EN 14175-2:2003 通风橱.第2部分:安全和性能要求

This part 2 of EN 14175 specifies safety and performance requirements and objectives for general purpose fume cupboards. In addition, dimensions and marking of general purpose fume cupboards are specified as well as requirements on the product manual to be supplied with fume cupboards.

Fume cupboards - Part 2: Safety and performance requirements

BS EN 14056:2003 实验室家具.设计和安装建议

This European Standard gives recommendations for the installation and design of laboratory benches, storage units and services and their connections and fittings. The recommendations may be used by all parties involved in the design, manufacture, installation and use of a new laboratory or in the refitting of an old laboratory. NOTE 1. Attention is drawn to national regulations in respect of electricity, water and gas supply. NOTE 2. Attention is drawn to building regulations and requirements, e.g. for floor loading. NOTE 3. In the use of laboratory equipment and furniture, risk assessment and appropriate precautions are the responsibility of the organization running the laboratory and the laboratory user. NOTE 4. Attention is drawn to any national regulations in respect of transfer of liability during the building and installation of laboratories.

Laboratory furniture - Recommendations for design and installation