71.040.20 实验室器皿和有关仪器 标准查询与下载

ASTM E2014-11 金相实验室安全标准指南

1.1 This guide covers the outline of the basic safety guidelines to be used in a metallographic laboratory. Safe working habits are discussed for various tasks performed in a metallographic laboratory.1.2 The sections appear in the following order:This guide does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide on Metallographic Laboratory Safety

NF B35-020*NF EN ISO 13130:2011 实验室玻璃仪器.干燥器.

Laboratory glassware - Desiccators.

DIN EN ISO 13130:2011 实验室玻璃器皿器.烘干器(ISO 13130-2011);德文版本EN ISO 13130-2011

This International Standard specifies requirements and tests for desiccators and vacuum desiccators intended for general laboratory purposes such as drying of substances or material.

Laboratory glassware - Desiccators (ISO 13130:2011); German version EN ISO 13130:2011

DIN EN ISO 13079:2011 实验室玻璃和塑料制品.通过韦斯特格伦氏法测量红细胞沉降率所用试管(ISO 13079-2011);德文版本EN ISO 13079-2011

Laboratory glass and plastics ware - Tubes for the measurement of the erythrocyte sedimentation rate by the Westergren method (ISO 13079:2011); German version EN ISO 13079:2011

DIN EN ISO 13132:2011 实验室玻璃仪器.培养皿(ISO 13132-2011);德文版本EN ISO 13132-2011

Laboratory glassware - Petri dishes (ISO 13132:2011); German version EN ISO 13132:2011

BS EN ISO 13132:2011 实验室玻璃仪器.培养皿

This International Standard specifies requirements and tests for glass Petri dishes intended for general laboratory purposes and microbiological work.

Laboratory glassware. Petri dishes

BS EN ISO 13130:2011 实验室玻璃仪器.烘干器

This International Standard specifies requirements and tests for desiccators and vacuum desiccators intended for general laboratory purposes such as drying of substances or material.

Laboratory glassware. Desiccators

BS EN ISO 13079:2011 实验室玻璃和塑料制品.使用韦斯特格伦氏法测量红细胞沉降率用导管

This International Standard specifies requirements for single-use and re-usable glass and plastics tubes for measuring the erythrocyte sedimentation rate (ESR) by the Westergren method, and for a support to hold tubes during the performance of the test. These so-called “Westergren tubes” are also sometimes designated as “Westergren pipettes”. A procedure for measuring the erythrocyte sedimentation rate by the Westergren method is given in informative Annex D. This International Standard does not apply to single-use containers for human venous blood specimen collection and their accessories for which other standards apply. It also does not apply for devices where the Westergren method has been used as basis to develop other, similar methods or equipment for the erythrocyte sedimentation rate determination.

Laboratory glass and plastics ware. Tubes for the measurement of the erythrocyte sedimentation rate by the Westergren method

EN ISO 13130:2011 实验室玻璃器皿器.烘干器

This International Standard specifies requirements and tests for desiccators and vacuum desiccators intendedfor general laboratory purposes such as drying of substances or material.

Laboratory glassware - Desiccators (ISO 13130:2011)

EN ISO 13132:2011 实验室玻璃仪器.培养皿

This International Standard specifies requirements and tests for glass Petri dishes intended for generallaboratory purposes and microbiological work.

Laboratory glassware - Petri dishes (ISO 13132:2011)

EN ISO 13079:2011 实验室玻璃和塑料制品.通过韦斯特格伦氏法测量红细胞沉降率所用试管

This International Standard specifies requirements for single-use and re-usable glass and plastics tubes formeasuring the erythrocyte sedimentation rate (ESR) by the Westergren method, and for a support to holdtubes during the performance of the test. These so-called “Westergren tubes” are also sometimes designatedas “Westergren pipettes”. A procedure for measuring the erythrocyte sedimentation rate by the Westergrenmethod is given in informative Annex D.

Laboratory glass and plastics ware - Tubes for the measurement of the erythrocyte sedimentation rate by the Westergren method (ISO 13079:2011)

ISO 13132:2011 试验室玻璃器皿.培养皿

Laboratory glassware - Petri dishes

ISO 13130:2011 试验室玻璃器皿.烘干器

Laboratory glassware - Desiccators

ISO 13079:2011 试验室玻璃与塑料制品.使用魏氏法测量红细胞沉降率用管

Laboratory glass and plastics ware - Tubes for the measurement of the erythrocyte sedimentation rate by the Westergren method

NF B35-309:2011 实验室玻璃仪器.测定体积的仪器.供使用和容量测试的方法

Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use.

ASTM E563-11 作为参考温度的冰点浴的制备和使用的标准实践

This practice is adequate for use with other ASTM standards that specify the ice point as a reference. It is also intended to be adequate for most other ice-point reference purposes. The ice point is a common practical industrial reference point of thermometry. The ice point is relatively simple to realize and provides a readily available natural fixed-point reference temperature. Use in Resistance Thermometry: The ice point was a defining fixed point on practical temperature scales prior to 1960. The ITS-90 defines W(T90) = R(T90)/R(273.16 K), the measured resistance ratio of a Standard Platinum Resistance Thermometer (SPRT), in reference to the water triple point, not the ice point (1). In many instances, where the water triple point is not available, or when the accuracy obtainable with the water triple point is not required, reference to a properly established and maintained ice-point reference is used. For industrial-quality resistance thermometers, the resistance value is determined for 0 °C, and an uncertainty that is appropriate for the quality of the ice-point realization is assigned. Use in Thermoelectric Thermometry: In thermoelectric thermometry, the ice point is ordinarily used as the reference temperature (2). Adequate thermoelectric reference requires that thermocouple junctions be well-coupled thermally to the bath, electrically isolated from each other and from the bath, and adequately immersed to avoid perturbing the reference-junction temperatures by radiation and longitudinal conduction of heat along the thermoelements (3 and 4). Use in Liquid-in-Glass Thermometry: In liquid-in-glass thermometry, the ice point is ordinarily used as the reference temperature (6). The periodic recalibration of a liquid-in-glass thermometer at the ice point provides a reliable indication of the effect of gradual relaxation of residual mechanical strains in the glass that have a significant effect on the volume of the bulb (6).1.1 This practice covers a method of preparing, maintaining, and using a temperature reference bath of a mixture of shaved ice and water, saturated with air at a pressure of 101 325 Pa (1 atm). 1.2 An industrial practice for relating values referenced to the ice point and to the water triple point on the ITS-90 is included. 1.3 Methods to promote uniformity of bath temperature by mechanical stirring or agitation are not described in detail. 1.4 Methods of approximating the ice point, as by thermostatically-controlled refrigeration, are not covered by this practice. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Preparation and Use of an Ice-Point Bath as a Reference Temperature

DIN EN ISO 4787:2011 实验室玻璃仪器.测定体积的仪器.供使用和容量的试验方法(ISO 4787-2010,修正版本2010-06-15).德文版本EN ISO 4787-2011

This International Standard provides methods for the testing, calibration and use of volumetric instruments made from glass in order to obtain the best accuracy in use. NOTE Testing is the process by which the conformity of the individual volumetric instrument with the appropriate standard is determined, culminating in the determination of its error of measurement at one or more points. The International Standards for the individual volumetric instruments include clauses on the definition of capacity; these clauses describe the method of manipulation in sufficient detail to define the capacity without ambiguity. This International Standard contains supplementary information. The procedures are applicable to volumetric instruments with nominal capacities in the range of 0.1 ml to 10 000 ml. This include: single-volume pipettes (see ISO 648) without subdivisions; graduated measuring pipettes and dilution pipettes, with partial or complete subdivisions (see ISO 835); burettes (see ISO 385); volumetric flasks (see ISO 1042); and graduated measuring cylinders (see ISO 4788). The procedures are not recommended for testing of volumetric instruments with capacities below 0.1 ml such as micro-glassware. This International Standard does not deal specifically with pyknometers as specified in ISO 3507. However, the procedures specified below for the determination of volume of glassware can, for the most part, also be followed for the calibration of pyknometers.

Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use (ISO 4787:2010, Corrected version 2010-06-15); German version EN ISO 4787:2011

EN ISO 4787:2011 实验室玻璃仪器.测定体积的仪器.供使用和容量的试验方法

This International Standard provides methods for the testing, calibration and use of volumetric instrumentsmade from glass in order to obtain the best accuracy in use.

Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use (ISO 4787:2010, Corrected version 2010-06-15)

GOST IEC 61010-2-020-2011 测量、控制和实验室用电气设备的安全性要求.第2-020部分:实验室离心机的详细要求

Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-020. Particular requirements for laboratory centrifuges

ASTM E563-11(2016) 制备和使用作为参考温度的冰点浴的标准实施规程

5.1 This practice is adequate for use with other ASTM standards that specify the ice point as a reference. It is also intended to be adequate for most other ice-point reference purposes. 5.2 The ice point is a common practical industrial reference point of thermometry. The ice point is relatively simple to realize and provides a readily available natural fixed-point reference temperature. 5.3 Use in Resistance Thermometry:  5.3.1 The ice point was a defining fixed point on practical temperature scales prior to 1960. 5.3.2 The ITS-90 defines W(T90)8201;=8201;R(T90)/R(273.16 K), the measured resistance ratio of a Standard Platinum Resistance Thermometer (SPRT), in reference to the water triple point, not the ice point (1).3 In many instances, where the water triple point is not available, or when the accuracy obtainable with the water triple point is not required, reference to a properly established and maintained ice-point reference is used. For industrial-quality resistance thermometers, the resistance value is determined for 0 °C, and an uncertainty that is appropriate for the quality of the ice-point realization is assigned. 5.4 Use in Thermoelectric Thermometry:  5.4.1 In thermoelectric thermometry, the ice point is ordinarily used as the reference temperature (2). 5.4.2 Adequate thermoelectric reference requires that thermocouple junctions be well-coupled thermally to the bath, electrically isolated from each other and from the bath, and adequately immersed to avoid perturbing the reference-junction temperatures by radiation and longitudinal conduction of heat along the thermoelements (3 and 4). 5.5 Use in Liquid-in-Glass Thermometry:  5.5.1 In liquid-in-glass thermometry, the ice point is ordinarily used as the reference temperature (5). 5.5.2 The periodic recalibration of a liquid-in-...... ......

Standard Practice for Preparation and Use of an Ice-Point Bath as a Reference Temperature