71.040.20 实验室器皿和有关仪器 标准查询与下载

KS B ISO 4797:2009 实验室玻璃器皿 共同点对准蒸馏烧瓶

Laboratory glassware－Boiling flasks with conical ground joints

NF E40-010:2009 离心分离机.一般安全要求

Centrifuges - Common safety requirements.

NF B35-904*NF EN ISO 24998:2009 塑料实验室器皿.微生物过程用单用途皮氏培养皿

Plastics laboratory ware - Single-use Petri dishes for microbiological procedures.

DIN EN ISO 24998:2009 塑料实验室器皿 微生物过程用单用途皮氏培养皿

This International Standard specifies requirements and test methods for plain, single-use Petri dishes for microbiological use. This International Standard does not apply to products of similar design which may be used for cell or tissue culture purposes. Neither does it apply to dishes supplied ready loaded with microbiological media. NOTE Petri dishes are used for microbiological routine purposes in very large numbers and consequently, are often handled by robotic equipment. Users of such equipment should satisfy themselves that the Petri dishes of any given manufacturer are suitable for use with such equipment and, if obtained from several sources, are compatible if mixed.

Plastics laboratory ware - Single-use Petri dishes for microbiological procedures (ISO 24998:2008); English version of DIN EN ISO 24998:2009-03

LST EN ISO 24998:2009 塑料实验室器皿 用于微生物程序的一次性培养皿（ISO 24998:2008）

Plastics laboratory ware - Single-use Petri dishes for microbiological procedures (ISO 24998:2008)

DS/EN ISO 24998:2009 塑料实验室器具 微生物程序用一次性培养皿

This standard specifies requirements and test methods for plain, single-use Petri dishes for microbiological use.

Plastics laboratory ware - Single-use Petri dishes for microbiological procedures

DIN EN ISO 648:2009 实验室玻璃器皿.单一容量吸液管

This International Standard specifies metrological and constructional requirements for volumetric pipettes with one mark (total delivery) and for volumetric pipettes with two marks, both of which are adequate for general laboratory purposes. The details specified are in conformity with the principles of design and construction of volumetric glassware given in ISO 384. NOTE For graduated pipettes, see ISO 835. For piston-operated pipettes, see ISO 8655-2.

Laboratory glassware - Single-volume pipettes (ISO 648:2008); English version of DIN EN ISO 648:2009-01

ASTM E960-93(2008) 实验室玻璃烧杯的标准规格

Standard Specification for Laboratory Glass Beakers

ASTM E1404-94(2008) 实验室玻璃锥形瓶的标准规格

Standard Specification for Laboratory Glass Conical Flasks

ISO/DIS 4802-1 玻璃器皿《玻璃容器内表面耐水解性》第1部分：滴定法测定及分类

Glassware — Hydrolytic resistance of the interior surfaces of glass containers — Part 1: Determination by titration method and classification

ISO/DIS 4802-2 玻璃器皿《玻璃容器内表面耐水解性》第2部分：火焰光谱法测定及分级

Glassware — Hydrolytic resistance of the interior surfaces of glass containers — Part 2: Determination by flame spectrometry and classification

EN ISO 6145-1:2008 气体分析.动态容量法制备校准气体混合物.第1部分:校准方法

This part of ISO 6145 specifies the calibration methods involved in the preparation of gas mixtures by dynamic volumetric techniques. It also gives a brief presentation of a non-exhaustive list of examples of dynamic volumetric techniques which are described in more detail in other parts of ISO 6145.

Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1: Methods of calibration (ISO 6145-1:2003)

DIN EN 12602:2008 高压加气混凝土的预制加筋组件

This European Standard is for prefabricated reinforced components of autoclaved aerated concrete to be used in building construction for: a) Structural elements: -- Ioadbearing wall components; -- retaining wall components; -- roof components; -- floor components; -- linear components (beams and piers). b) Non-structural elements: -- nonloadbearing wall components (partition walls); -- cladding components (without fixtures) intended to be used for external facades of buildings; -- small box culverts used to form channels for the enclosure of services; -- components for noise barriers. Depending on the type and intended use of elements for which the components are utilised, the components can be applied - in addition to their Ioadbearing and encasing function - for purposes of fire resistance, sound insulation and thermal insulation indicated in the relevant clauses of this European Standard. Components covered by this standard are only intended to be subjected to predominantly non-dynamic actions, unless special measures are introduced in the relevant clauses of this European Standard. The term "reinforced" relates to reinforcement used for both structural and non-structural purposes. This European Standard does not cover: -- rules for the application of these components in structures; -- joints (except their strength and integrity E of resistance to fire); -- fixtures; -- finishes for external components, such as tiling. NOTE AAC components may be used in noise barriers if they are designed to fulfil also the requirements of EN 14388.

Prefabricated reinforced components of autoclaved aerated concrete; English version of DIN EN 12602:2008-08

ABNT NBR ISO 383 Versão Corrigida:2008 实验室玻璃器皿 - 可互换的锥形地面关节

This International Standard specifies the essential geometric requirements for interchangeability in relation to four series of conical ground glass joints for laboratory use.

Laboratory glassware - Interchangeable conical ground joints

EN ISO 24998:2008 塑料实验室器皿.微生物过程用单用途皮氏培养皿

This International Standard specifies requirements and test methods for plain, single-use Petri dishes for microbiological use.

Plastics laboratory ware - Single-use Petri dishes for microbiological procedures

KS B ISO 4797-2007 实验室玻璃器皿 - 共同点对准蒸馏烧瓶

Laboratory glassware－Boiling flasks with conical ground joints

KS B ISO 4797:2007 实验室玻璃器皿 - 共同点对准蒸馏烧瓶

Laboratory glassware－Boiling flasks with conical ground joints

DS/EN ISO 835:2007 实验室玻璃器皿 刻度移液器（ISO 835:2007）

This International Standard specifies metrological and constructional requirements for graduated pipettes, adequate for general laboratory purposes.The details specified are in conformity with the principles of design and construction of volumetric glassware given in ISO 384.NOTE For one-mark pipettes, see ISO 648. For piston-operated pipettes, see also ISO 8655-2.

Laboratory glassware - Graduated pipettes (ISO 835:2007)

NF B35-306*NF EN ISO 835:2007 实验室玻璃器皿.刻度吸量管

Laboratory glassware - Graduated pipettes.

DIN EN ISO 835:2007 实验室玻璃器皿.刻度吸量管

This International Standard specifies metrological and constructional requirements for graduated pipettes, adequate for general laboratory purposes. The details specified are in conformity with the principles of design and construction of volumetric glassware given in ISO 384. NOTE For one-mark pipettes, see ISO 648. For piston-operated pipettes, see ISO 8655-2.

Laboratory glassware - Graduated pipettes (ISO 835:2007); English version of DIN EN ISO 835:2007-08