71.080.10 脂族烃 标准查询与下载

ASTM D5274-92(1997) 1,3-丁二烯产品分析的标准指南

Standard Guide for Analysis of 1,3-Butadiene Product

ASTM D6313-99 通过氢热解和硫特殊差别光度学对芳香化合物中总硫的试验方法

Sulfur can be a catalyst poison in the aromatic chemical manufacturing process. This test method can be used to monitor the amount of sulfur in aromatic hydrocarbons. This test method may also be used as a quality control tool and in setting specifications for sulfur determination in finished products.1.1 This test method covers the determination of sulfur in aromatic hydrocarbons, their derivatives and related chemical having typical sulfur concentrations from 0.005 to 10 mg/kg. 1.2 This test method may be extended to higher concentrations by dilution. 1.3 This test method is applicable to aromatic hydrocarbons such as benzene, toluene, cumene, p-xylene, o-xylene, cyclohexane, phenol, cresols, xylenols, and other aromatic or oxygenated aromatic compounds. 1.4 The following applies to all specified limits in this test method: for purposes of determining conformance with this standard, an observed value or a calculated value shall be rounded off to the nearest unit in the last right-hand digit used for expressing the specification limit in accordance with the rounding-off method of Practice E 29. 1.5 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. specific precautionary statements are given in 7./5, 76. 8, 11.4.

Test Method for Total Sulfur in Aromatic Compounds by Hydrogenolysis and Sulfur Specific Difference Photometry

ASTM D2505-88(1998) 通过气相色谱法测定高纯度乙烯中乙烯 其他碳氢化合物和二氧化碳的标准试验方法

Standard Test Method for Ethylene, Other Hydrocarbons, and Carbon Dioxide in High-Purity Ethylene by Gas Chromatography

ASTM D2268-93(1998) 毛细管气相色谱法分析高纯度正庚烷和异辛烷的标准试验方法

Standard Test Method for Analysis of High-Purity n-Heptane and Isooctane by Capillary Gas Chromatography

ASTM D2426-93(1998) 通过气相色谱法测定丁二烯浓缩物中丁二烯二聚体和苯乙烯的标准测试方法

Standard Test Method for Butadiene Dimer and Styrene in Butadiene Concentrates by Gas Chromatography

ANSI/ASTM D6260:1998 尼龙材料中碳黑的重量分析测定的试验方法

This method is applicable to the determination of carbon black in nylon resins. For the pupose of process control, other methods(i.e., spectrophotometric) may be used, if shown to produce equivalent results; however, the gravimetric procedure, described in thei standard, shall be used to resolve differences that may occur between laboratories.

Test Method for Gravimetric Determination of Carbon Black in Nylon Materials

GSO 889:1997 工业用甲醇

This standard is concerned with methanol for industrial use.

METHANOL FOR INDSTRIAL USE

GSO 888:1997 工业用乙烯的试验方法

This Gulf standard is concerned with test methods for ethylene gas used for industrial purposes.

TEST METHODS FOR ETHYLENE FOR INDUSTRIAL PURPOSES

GSO 890:1997 工业用甲醇试验方法

This standard is concerned with the methods of testing the methanol used for industrial purposes.

METHODS OF TESTING METHANOL FOR INDUSTRIAL PURPOSES

GSO 887:1997 工业用乙烯

This standard is concerned with ethylene for industrial purposes.

ETHYLENE FOR INDUSTRIAL PURPOSES

ASTM D5309-97 环己烷999的标准规格

1.1 This specification covers a grade of cyclohexane identified as "cyclohexane 999." 1.2 Consult current OSHA regulations and supplier's Material Safety Data Sheets for all materials used in this specification. 1.3 The following applies to all specified limits in this standard: for purposes of determining conformance with this standard, an observed value or a calculated value shall be rounded off "to the nearest unit" in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29.

Standard Specification for Cyclohexane 999

CNS 2185-1997 聚胺酯漆包铜线

标准适用于温度指数 120℃各种电机、电子、通信及仪表线圈及配线之聚胺酯漆包铜线（以下简称漆包线）。备考：本标准｛｝之单位及数值系国际单位〔SI〕并记，供参考用。

Polyurethane enamelled round copper winding wires

CNS 3334-1997 锌合金压铸件

本标准适用于锌合金压铸件。(以下简称铸件)

Zinc alloy die castings

ANSI/ASTM D6100:1997 挤压铸模和喷射铸模乙缩醛型材规范

This specification covers requirements and test methods for the material, dimensions, and workmanship, and the properties of extruded, compression molded and injection molded acetal sheet, plate, rod, and tubular bar manufactured from acetal. The properties included in this specification are those required for the compositions covered. Requirements necessary to identify particular characteristics important to specialized applications may be described by using the classification system given in Section . This specification allows for the use of recycled plastics as defined in Guide D 5033. The values stated in inch-pound units are to be regarded as the standard in all property and dimensional tables. For reference purposes, SI units are included in Table S-POM and Table 1 only. The following precautionary caveat pertains only to the test method portions, Section , of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Note 1 -There is no similar or equivalent ISO Standard.

Specification for Extruded, Compression Molded and Injection Molded Acetal Shapes (Pom)

HG/T 2816-1996 工业环己胺

本标准规定了工业环已胺的要求、采样方法、试验方法、标志、包装、运输和贮存等。 本标准适用于由苯胺常压催化加氢反应而制得的环已胺。

Industrial Cyclohexylamine

HG/T 2722-1995 一异丙胺

本标准规定了一异丙胺的技术要求,试验方法、检验规则以及标志、包装、运输和贮存等要求。 本标准适用于在氧气的存在下，原料通过高镍触媒转化及异丙醇氨化法制的一异丙胺。该产品主要用于农药、医药、染料和橡胶加工等。 分子式：C|(3)H|(3)N 结构式：CH|(4)-CH-CH|(3) NH|(2) 相对分子质量：59.11(按1991年国际相对原子质量)

monoisopropylamine

HG/T 2719-1995 一乙胺

本标准规定了一乙胺的技术要求、试验方法、检验规则以及标志、包装、运输和贮存等要求。 本标准适用于氧气的存在下，原科通过高镍触媒转化法制得的一乙胺。该产品主要 用于农药、医药、染料和橡胶加工等。 分子式：C|(2)H|(7)N 结构式：CH|(3)-CH|(2)-NH|(2) 相对分子质量：45.08(按1991年国际相对原子质量)

monoethylamine

HG/T 2721-1995 三乙胺

本标准规定了三乙胺的技术要求，试验方法、检验规则以及标志、包装、运输和贮存等要求。 本标准适用于在氢气的存在下。原料通过高镍触媒转化法制得的三乙胺。该产品主要用于农药、医药、染料和橡胶加工等。 分子式：C6H15N 结构式：CH3-CH2-N-CH2-CH3 CH2 CH3 相对分子质量：101.19(按1991年国际相对原子质量)

Triethylamine

HG/T 2720-1995 二乙胺

本标准规定了二乙胺的技术要求，试验方法、检验规则以及标志、包装、运输和贮存等要求。 本标准适用于在氢气的存在下，原料通过高镍触媒转化及乙醇氨化法制得的二乙胺。该产品主要用于农药、医药、染料和橡胶加工等。 分子式：C|(4)H|(11)N 结构式：CH|(2)-CH|(2)-NH-CH-CH|(3) 相对分子质量：73.14(按1991年国际相对原子质量)

Diethylamine

HG/T 2662-1995 工业1,2-二氯乙烷

本标准规定了工业1.2-二氯乙烷的技术要求，试验方法、检验规则、标志、包装、运输和贮存。 分子式：C2H4Cl2 相对分子质量：98.96(按1991年国际相对原子质量) 

Industrial 1,2-dichloroethane