71.080.20 (Halogenated hydrocarbons) 标准查询与下载

ASTM D2106-07e1 测定卤化有机溶剂的胺酸接受性(碱度)用标准试验方法

This test method is useful for the determination of the amount of acid acceptance contributed by amines or bases as compared to other acid-accepting compounds.1.1 These test methods, where applicable, cover the determination of the acid acceptance of halogenated organic solvents due to the presence therein of an organic amine titratable by standard acid. These test methods are suitable for samples of 0.001 to 0.02 weight percent (10 – 200 ppm) alkalinity as NaOH. Two test methods are covered as follows: 1.1.1 Test Method A8212; pH Method, and 1.1.2 Test Method B8212; Indicator Method. 1.1.3 Test Method C8212;GC Method. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Methods for Determination of Amine Acid Acceptance (Alkalinity) of Halogenated Organic Solvents

ASTM D7326-06e1 氢氟化碳(HFC)混合B(CH₂FCF₃、CHF₂CF₃和CO₂)的搬运、运输和贮藏用标准实施规程

This practice provides requirements for the handling, transportation, and storage of HFC Blend B encountered in distribution through both commercial and military channels. It is intended to ensure that HFC Blend B is handled, transported, and stored in such a way that its physical property virtues are not degraded. Transport may be by various means, such as, but not limited to, highway, rail, water, and air.1.1 This practice covers guidance and direction to suppliers, reclaimers, purchasers, and users in the handling, transportation, and storage of HFC Blend B.1.2 The values stated in inch-pound and SI units are to be regarded as standard. SI units are preferred.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Handling, Transportation, and Storage of HFC Blend B (CH₂FCF ₃, CHF₂ CF₃, and CO₂)

ASTM D6368-06(2012) 基于一般级别的丙基溴化物和技术级别的一般级别的丙基溴化物的蒸汽脱脂溶剂的标准规范

1.1 This standard covers solvents based on stabilized normal-propyl bromide (nPB) for use in vapor degreasing. The standard also includes a separate specification for technical-grade n-propyl bromide. 1.2 Blends and azeotropic mixtures of stabilized nPB for vapor-degreasing shall be blended from nPB meeting the specification for technical-grade nPB. Note 18212;Practices D3844 and D4276 and MNL2 provide additional important information on vapor degreasing and solvent properties.

Standard Specification for Vapor-Degreasing Solvents Based on normal-Propyl Bromide and Technical Grade normal-Propyl Bromide

ASTM D7326-06 氢氟化碳(HFC)混合B(CH₂FCF₃、CHF₂CF₃和CO₂)的搬运、运输和贮藏用标准实施规程

1.1 This practice covers guidance and direction to suppliers, reclaimers, purchasers, and users in the handling, transportation, and storage of HFC Blend B.1.2 The values stated in inch-pound and SI units are to be regarded as standard. SI units are preferred.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Handling, Transportation, and Storage of HFC Blend B (CH₂FCF ₃, CHF₂ CF₃, and CO₂)

ASTM D6368-06 基于一般级别的丙基溴化物和技术级别的一般级别的丙基溴化物的蒸汽脱脂溶剂的标准规范

1.1 This standard covers solvents based on stabilized normal-propyl bromide (nPB) for use in vapor degreasing. The standard also includes a separate specification for technical-grade n-propyl bromide.1.2 Blends and azeotropic mixtures of stabilized nPB for vapor-degreasing shall be blended from nPB meeting the specification for technical-grade nPB.Note 1Practices D 3844 and D 4276 and MNL2 provide additional important information on vapor degreasing and solvent properties.

Standard Specification for Vapor-Degreasing Solvents Based on normal-Propyl Bromide and Technical Grade normal-Propyl Bromide

ASTM D6368-05 蒸汽脱脂级别和一般级别的丙基溴化物的标准规范

1.1 This specification covers vapor-degreasing grade and general solvent grade normal-propyl bromide (nPB). High-purity grades of nPB are available but should not be evaluated by this specification.1.2 Blends and azeotropic mixtures of nPB for vapor-degreasing and general solvent grades should be blended from nPB meeting this specification.Note 18212;Practices D 3844 and D 4276 and MNL2 178;provide additional important information on vapor degreasing and solvent properties.

Standard Specification for Vapor-Degreasing Grade and General Grade normal-Propyl Bromide

ASTM D5396-04(2015) 回收全氯乙烯的标准规格

1.1 This specification covers the grade of perchloroethylene typically needed in various industries for noncritical applications, such as in metal cleaning formulations. It is not recommended for dry cleaning applications (see Specification D4081). It may be used as a reference document by purchasers or by persons establishing in-house perchloroethylene recovery programs.

Standard Specification for Reclaimed Perchloroethylene

ASTM D7123-04 HCFC混合料B(CF3CCl 2H、 Ar和CF4)的搬运、运输和储存的标准实施规程

1.1 This practice covers guidance and direction to suppliers, reclaimers, purchasers, and users in the handling, transportation, and storage of HCFC Blend B.1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are for information only.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Handling, Transportation, and Storage of HCFC Blend B (CF3CCl 2H, Ar, and CF4)

ASTM D5396-04 再生全氯乙烯的标准规范

1.1 This specification covers the grade of perchloroethylene typically needed in various industries for noncritical applications, such as in metal cleaning formulations. It is not recommended for dry cleaning applications (see Specification D 4081). It may be used as a reference document by purchasers or by persons establishing in-house perchloroethylene recovery programs.

Standard Specification for Reclaimed Perchloroethylene

ASTM D4995-04 1,1,2-三氯 1,2,2-三氟乙烷溶剂的脱脂等级和电子等级的标准规范

1.1 This specification establishes the requirements for three grades of trichlorotrifluoroethane solvent:1.1.1 Type I electronic or ultra-clean grade,1.1.2 Type II standard or vapor-degreasing grade, and1.1.3 Type II A general purpose, packaged in a pressurized container grade.

Standard Specifications for Electronic and Degreasing Grades of 1,1,2-Trichloro 1,2,2,-Trifluoroethane Solvent

ASTM D5616-04(2010) 回收三氯乙烯的标准规范

1.1 This specification covers the grades of trichloroethylene typically needed in various industries for noncritical applications such as in metal cleaning formulations. It may be used as a reference document by purchasers or persons establishing in-house trichloroethylene recovery programs.

Standard Specification for Reclaimed Trichloroethylene

ASTM D5616-04 再生三氯乙烯的标准规范

1.1 This specification covers the grades of trichloroethylene typically needed in various industries for noncritical applications such as in metal cleaning formulations. It may be used as a reference document by purchasers or persons establishing in-house trichloroethylene recovery programs.

Standard Specification for Reclaimed Trichloroethylene

ASTM D5396-04(2010) 再生全氯乙烯的标准规范

1.1 This specification covers the grade of perchloroethylene typically needed in various industries for noncritical applications, such as in metal cleaning formulations. It is not recommended for dry cleaning applications (see Specification D4081). It may be used as a reference document by purchasers or by persons establishing in-house perchloroethylene recovery programs.

Standard Specification for Reclaimed Perchloroethylene

ASTM D7123-04(2010) HCFC混合料B(CF3CCl 2H、 Ar和CF4)的搬运、运输和储存的标准实施规程

This practice provides requirements for the handling, transportation, and storage of HCFC Blend B encountered in distribution through both commercial and military channels. It is intended to ensure that HCFC Blend B is handled, transported, and stored in such a way that its physical property virtues are not degraded. Transport may be by various means, such as, but not limited to, highway, rail, water, and air.1.1 This practice covers guidance and direction to suppliers, reclaimers, purchasers, and users in the handling, transportation, and storage of HCFC Blend B. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Handling, Transportation, and Storage of HCFC Blend B (CF3CCl 2H, Ar, and CF4)

ASTM D4995-04(2010) 1,1,2–电子和脱脂等级的标准规范；三氯1,2,2和#x2013；三氟乙烷溶剂

1.1 This specification establishes the requirements for three grades of trichlorotrifluoroethane solvent: 1.1.1 Type I electronic or ultra-clean grade, 1.1.2 Type II standard or vapor-degreasing grade, and 1.1.3 Type IIA general purpose, packaged in a pressurized container grade.

Standard Specifications for Electronic and Degreasing Grades of 1,1,2-Trichloro 1,2,2,-Trifluoroethane Solvent

ASTM D5395-03(2013) 回收二氯甲烷的标准规范

1.1 This specification covers the grade of methylene chloride typically needed in various industries for noncritical applications, such as in paint stripping formulations. It may be used as a reference document by purchasers or by persons establishing in-house methylene chloride recovery programs.TABLE 1 Physical Properties Property Specification Test Method Specific gravity, 25/25 1.318 to 1.323 D2111 Acidity, as HCl, ppm, max 1.0 D2989 Water, ppm, max 500 D3401 or E1064 Appearance Clear and free from 8199;suspended matter D3741 Color, Pt-Co, max 50 D2108 Nonvolatile residue, ppm, max 50

Standard Specification for Reclaimed Methylene Chloride

ASTM D5960-03(2013) 技术级乙烯二氯化物的标准规范

1.1 This specification covers technical grade ethylene dichloride. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

Standard Specification for Technical Grade Ethylene Dichloride

ASTM D5960-03(2008) 技术级乙烯二氯化物的标准规范

1.1 This specification covers technical grade ethylene dichloride.

Standard Specification for Technical Grade Ethylene Dichloride

ASTM D5960-03 工业品位的二氯化乙烯的标准规范

1.1 This specification covers technical grade ethylene dichloride.

Standard Specification for Technical Grade Ethylene Dichloride

ASTM D5395-03(2008) 回收二氯甲烷的标准规范

1.1 This specification covers the grade of methylene chloride typically needed in various industries for noncritical applications, such as in paint stripping formulations. It may be used as a reference document by purchasers or by persons establishing in-house methylene chloride recovery programs.

Standard Specification for Reclaimed Methylene Chloride