共找到 1044 条与 铝生产用材料 相关的标准,共 70 页
本标准规定了铝电解用预焙阳极的要求、试验方法、检验规则和标志、包装、运输、贮存及合同内容等。
Carbon slag-free prebaked anode for aluminum electrolysis
This document specifies a method to determine the coefficient of linear thermal expansion of carbonaceous or graphite materials (solid materials) for the production of aluminium between 20 °C and 300 °C. It applies to baked anodes and shaped carbon products.
Carbonaceous products for the production of aluminium — Baked anodes and shaped carbon products — Determination of the coefficient of linear thermal expansion
What is ISO 15379-1 - Cathode block materials about? ISO 15379-1 is the first part of the multi-series standard on carbonaceous materials for the production of aluminium. ISO 15379-1 specifies a method that covers the determination of linear expansion under external pressure due to sodium penetration in cathode-block materials used in the production of aluminium. The linear expansion of the blocks depends on the sampling direction due to anisotropy. Who is ISO 15379-1 -
Carbonaceous materials for the production of aluminium. Cathode block materials - Determination of the expansion due to sodium penetration with application of pressure
Carbonaceous materials used in the production of aluminium-Cold-ramming pastes-Determination of effective binder content and aggregate content by extraction with quinoline, and determination of aggregate size distribution
Carbonaceous materials for the production of aluminium-Green coke-Determination of volatile matter content by gravimetric analysis
Carbonaceous materials for the production of aluminium-Cathode blocks and pre-baked anodes-Determination of the density in xylene by a pycnometric method
Carbonaceous materials used in the production of aluminium-Pitch for electrodes-Determination of volatile matter content
Carbonaceous materials used in the production of aluminium-Calcined coke-Determination of particle size distribution
Carbonaceous materials used in the production of aluminium-Pitch for electrodes-Determination of C/H ratio in the quinoline-insoluble fraction
Carbonaceous materials for the production of aluminium-Calcined coke for electrodes-Determination of the electrical resistivity of granules
Testing method for compressive properties of media for water treatment
Carbonaceous materials used in the production of aluminium-Baked anodes and cathode blocks-Part 1:Determination of apparent density using a dimensions method
Carbonaceous materials for the production of aluminium-Calcined coke-Determination of oil content-Method by solvent extraction
Carbonaceous materials for use in the production of aluminium - Calcined coke - Determination of grain stability using a laboratory vibration mill
Carbonaceous materials used in the production of aluminium-Cold-ramming paste-Methods of sampling
Carbonaceous materials for the production of aluminium-Green coke and calcined coke for electrodes-Determination of bulk density(tapped)
This document specifies a method that covers the determination of linear expansion under external pressure due to sodium penetration in cathode-block materials used in the production of aluminium. The linear expansion of the blocks depends on the sampling direction due to anisotropy.
Carbonaceous materials for the production of aluminium — Cathode block materials — Part 1: Determination of the expansion due to sodium penetration with application of pressure
What is ISO 14428 - Expansion/shrinkage during baking of cold and tepid ramming pastes about? ISO 14428 is applicable to the production of aluminium. ISO 14428 specifies the determination of expansion/shrinkage during baking of cold and tepid ramming pastes used in the production of aluminium. Who is ISO 14428 - Expansion/shrinkage during baking of cold and tepid ramming pastes for?
Carbonaceous materials for the production of aluminium. Cold and tepid ramming pastes. Expansion/shrinkage during baking
This document specifies the determination of expansion/shrinkage during baking of cold and tepid ramming pastes used in the production of aluminium.
Carbonaceous materials for the production of aluminium — Cold and tepid ramming pastes — Expansion/shrinkage during baking
What is ISO 5940-1 - Determination of softening point by the ring-and-ball method about? ISO 5940-1 is the first part of the multiple series that specifies the ring-and-ball method, a method of using the ring-and-ball apparatus for the determination of the softening point (softening temperature) of pitch used in the production of aluminium. Note- The method is applicable to pitches having softening points equal to or greater than 30 °C. Who is ISO 5940-1 - Determination of softening point by the ring-and-ball method for? ISO 5940-1
Carbonaceous materials for the production of aluminium. Pitch for electrodes - Determination of softening point by the ring-and-ball method
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号