71.100.20 工业气体 标准查询与下载

GSO ISO 8573-2:2013 压缩空气 第2部分：喷油部件的试验方法

This part of ISO 8573 specifies test methods for the sampling and quantitative analysis of oil aerosols and liquid oil that can typically be present in compressed air. Test methods for oil vapour are excluded from this part of ISO 8573 as they are covered by ISO 8573-5. Two different methods are described, method A and method B. Method B is subdivided into two parts to clearly distinguish between procedures for obtaining the quantity of oil for analysis.

Compressed air -- Part 2: Test methods for oil aerosol content

GSO ISO 8573-6:2013 压缩空气 第6部分：气态污染物含量试验方法

This part of ISO 8573 provides a selection of suitable test methods from those available for the measurement of contamination gases in compressed air. It specifies sampling technique, measurement and evaluation, uncertainty considerations and reporting for the applicable gaseous contaminants carbon monoxide, carbon dioxide, sulphur dioxide, nitric oxide, nitrogen dioxide and hydrocarbons in the range C1 to C5 (see ISO 8573-5 for C6 and above). The methods given are also suitable for other gases.

Compressed air -- Part 6: Test methods for gaseous contaminant content

KS B ISO 8573-5-2013 压缩空气 第5部分：油蒸气和有机溶剂含量的试验方法

Compressed air－Part 5：Test methods for oil vapour and organic solvent content

KS B ISO 8573-6-2013 压缩空气 第6部分：气态污染物含量试验方法

Compressed air－Part 6：Test methods for gaseous contaminant content

KS B ISO 8573-7-2013 压缩空气 第7部分：活微生物污染物含量的测试方法

Compressed air－Part 7：Test method for viable microbiological contaminant content

KS B ISO 8573-1-2013 压缩空气 污染物和纯度等级

Compressed air－Contaminants and purity classes

KS B ISO 8573-4-2013 压缩空气 固体颗粒含量试验方法

Compressed air－Test methods for solid particle content

KS B ISO 8573-1:2013 压缩空气 第1部分：杂质和纯度等级

Compressed air-Contaminants and purity classes

KS B ISO 8573-6:2013 压缩空气 第6部分：气体污染物含量的试验方法

Compressed air－Part 6：Test methods for gaseous contaminant content

KS B ISO 8573-8:2013 压缩空气 第8部分：用质量浓度法测定固体颗粒含量的试验方法

Compressed air－Part 8：Test methods for solid particle content by mass concentration

KS B ISO 8573-4:2013 压缩空气 第4部分：固体颗粒含量的试验方法

Compressed air－Test methods for solid particle content

KS B ISO 8573-9:2013 压缩空气 第9部分：液态水含量测定的试验方法

Compressed air-Part 9:Test methods for liquid water content

KS B ISO 8573-7:2013 压缩空气 第7部分：活微生物杂质含量的试验方法

Compressed air-Part 7:Test method for viable microbiological contaminant content

KS B ISO 8573-5:2013 压缩空气 第5部分：油蒸汽和有机溶剂含量测试方法

Compressed air-Part 5:Test methods for oil vapour and organic solvent content

KS B ISO 8573-3:2013 压缩空气 第3部分：潮湿度测定的试验方法

Compressed air-Test methods for measurement of humidity

DB13/T 1827-2013 静电复合式工业油烟净化、余热回收系统技术要求

本标准规定了静电复合式工业油烟净化、余热回收系统的术语和定义、技术要求、试验方法。 本标准适用于采用静电复合式工艺，净化生产线油烟并进行余热回收的工程。

Technical requirements for electrostatic compound industrial oil fume purification and waste heat recovery system

ASTM E582-07(2013)e1 气体混合物中最小点火能量和淬火距离的标准测试方法

1.1 This test method covers the determination of minimum energy for ignition (initiation of deflagration) and associated flat-plate ignition quenching distances.2 The complete description is specific to alkane or alkene fuels admixed with air at normal ambient temperature and pressure. This method is applicable to mixtures of the specified fuels with air, varying from the most easily ignitable mixture to mixtures near to the limit-of-flammability compositions. 1.2 Extensions to other fuel-oxidizer combinations, and to other temperatures and pressures can be accomplished with all the accuracy inherent in this method if certain additional conditions are met: (a) mixture stability and compatibility with bomb, seal, and other materials is established through time tests described in Section 9; (b) the expected peak pressure from the test is within the pressure rating of the bomb (established as required by the particular research laboratory); (c) spark breakdown within the bomb is consistent with Paschen’s law for the distance being tested; (d) the temperature, including that of the discharge electrodes, is uniform; and (e) if the temperature is other than ambient, the energy storage capacitance required is less than about 9 pF. 1.3 This method is one of several being developed by Committee E27 for determining the hazards of chemicals, including their vapors in air or other oxidant atmospheres. The measurements are useful in assessing fuel ignitability hazards due to static or other electrical sparks. However, the quenching distance data must be used with great prudence since they are primarily applicable to the ignition stage and therefore, represent values for initial pressure and not the smaller values existing at higher pressures. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 This standard should be used to measure and describe the properties of materials, products, or assemblies in response to heat and flame under controlled laboratory conditions and should not be used to describe or appraise the fire hazard or fire risk of materials, products, or assemblies under actual fire conditions. However, results of this test may be used as elements of a fire risk assessment which takes into account all of the factors which are pertinent to an assessment of the fire hazard of a particular end use. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific safety precautions are listed in Section 5.

Standard Test Method for Minimum Ignition Energy and Quenching Distance in Gaseous Mixtures

ANSI/AWWA B304-2013 水,废水,以及再生水系统的臭氧产生用液态氧

Liquid Oxygen for Ozone Generation for Water, Wastewater, and Reclaimed Water Systems

KS M 1122-2012 氩气(工业用)

이 표준은 액화 아르곤 및 압축 아르곤으로서 고압 가스 용기에 충전한 산업용 아르곤(이하

Argon

KS B ISO 10298-2012(2017) 气体或气体混合物的毒性测定

Determination of toxicity of a gas or gas mixture