71.100.99 其他化工产品 标准查询与下载



共找到 753 条与 其他化工产品 相关的标准,共 51

本文件规定了 275#高真空扩散泵油的技术要求、试验方法、检验规则、标志、随行文件、包装、运输和贮存。 本文件适用于以1,3-二甲基-1,1,3,3-四苯基二硅氧烷和三甲基三苯基环三硅氧烷为原料合成的275#高真空扩散泵油。

275# high vacuum diffusion pump oil

ICS
71.100.99
CCS
C268
发布
2023-03-31
实施
2023-04-05

本文件规定了纸张用无溶剂型有机硅离型剂产品的技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于以含乙烯基的聚硅氧烷为主要原料,并且不添加各种有机溶剂,通过加成反应固化制得的纸张用无溶剂型有机硅离型剂。

Solvent-free silicone release agent for paper

ICS
71.100.99
CCS
C266
发布
2023-03-31
实施
2023-04-05

本文件规定了 274#高真空扩散泵油的技术要求、试验方法、检验规则、标志、随行文件、包装、运输和贮存。 本文件适用于以1,3-二甲基-1,1,3,3-四苯基二硅氧烷和二甲基硅氧烷混合环体为原料合成的274#高真空扩散泵油。

274# high vacuum diffusion pump oil

ICS
71.100.99
CCS
C268
发布
2023-03-31
实施
2023-04-05

前言  1 范围  2 规范性引用文件  3 术语和定义  4 要求  4.1 外观  4.2 技术要求  5 试验方法  5.1 外观  5.2 组成成分测定  6 检验规则  6.1 出厂检验项目  6.2 组批  6.3 采样  6.4 检验判定  7 标志、包装、运输和贮存  7.1 标志  7.2 包装  7.3 运输  7.4 贮存  8 安全 

byproduct chlorosilane mixture

ICS
71.100.99
CCS
C261
发布
2023-03-27
实施
2023-03-27

本文件规定了自回收溶剂正庚烷的技术要求、试验方法、检验规则以及标志、包装、运输、贮存和安全等要求。

Self-recycled solvent Heptane

ICS
71.100.99
CCS
N772
发布
2023-03-23
实施
2023-03-23

本文件规定了自回收溶剂异丙醇的技术要求、试验方法、检验规则以及标志、包装、运输、贮存和安全等要求。

Self-recycled solvent Isopropanol

ICS
71.100.99
CCS
N772
发布
2023-03-23
实施
2023-03-23

本文件规定了自回收溶剂四氢呋喃的技术要求、试验方法、检验规则以及标志、包装、运输、贮存和安全等要求。

Self-recycled solvent Tetrahydrofuran

ICS
71.100.99
CCS
N772
发布
2023-03-23
实施
2023-03-23

本文件规定了从溶剂中自回收甲基叔丁基醚的技术要求、试验方法、检验规则以及标志、包装、运输、贮存和安全等要求。

Self-recycled solvent methyl tert-butyl ether

ICS
71.100.99
CCS
N772
发布
2023-03-23
实施
2023-03-23

本文件规定了建筑门窗用单组分聚氨酯泡沫填缝剂(以下简称PU填缝剂)的术语和定义、分类和标记、技术要求、试样及试件制备、试验方法、检验规则以及标志、包装、运输、贮存。  本文件适用于以多元醇和多异氰酸酯为主要原料的气雾罐装建筑门窗用单组分聚氨酯泡沫填缝剂。

One-component polyurethane foam for building doors and windows

ICS
71.100.99
CCS
C264
发布
2023-03-17
实施
2023-03-17

1 范围 2 规范性引用文件 3 术语和定义 4 安全性要求 5 试验方法

Standard of safety for liquid fragrance products

ICS
71.100.99
CCS
C268
发布
2023-03-15
实施
2023-09-01

1 范围 2 规范性引用文件 3 术语和定义 4 要求 5 试验方法 6 检验规则 7 标志、包装、运输、贮存和保质期

Liquid fragrance products

ICS
71.100.99
CCS
C268
发布
2023-03-15
实施
2023-09-01

本文件规定了废弃脱硝催化剂再生粉体的技术要求、检测方法、检测规则、标志、包装、储存和运输。

Wasted denitrification catalyst regeneration powder

ICS
71.100.99
CCS
C266
发布
2023-02-24
实施
2023-03-24

本标准规定了标签用胶黏剂的术语和定义、技术要求、检验方法、检验规则、标志、包装、运输和贮存。 本标准适用于标签用胶黏剂的生产及检验。

Adhesives for labels

ICS
71.100.99
CCS
C268
发布
2023-02-07
实施
2023-02-21

1.1 This test method covers the determination of the ASTM dropping point for waxes. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Dropping Point of Waxes

ICS
71.100.99
CCS
发布
2022-12-01
实施

1.1 This test method covers the determination of nonvolatile matter (total solids) in a water-emulsion, organic solvent-based liquid and paste floor polishes, and polymer-emulsion-type floor polishes. 1.2 This test method recognizes that the products may contain material that will slowly volatilize or change chemically with a resulting change in weight of the nonvolatile matter. Therefore, since drying to constant weight is impractical, specific drying times have been selected. 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Nonvolatile Matter (Total Solids) in Water-Emulsion Floor Polishes, Solvent-Based Floor Polishes, and Polymer-Emulsion Floor Polishes

ICS
71.100.99
CCS
发布
2022-12-01
实施

1.1 This test method covers the storage stability of liquid water-emulsion floor polishes. 1.2 Storage for 30 days at 52 °C (125 °F), while not a guarantee of one year stability at 21 °C (70 °F), is believed to be a more reliable indicator of storage stability than similar tests of shorter duration. NOTE 1—The 60° specular gloss on black glass determined by Test Method D1455, may be used to confirm this observation. A substantial difference in gloss between aged and unaged samples is an indication of instability. A shelf stability of one year can be reasonably expected of the material in question if duplicate samples remain unchanged for 30 days at 52 °C 6 1.1 °C (125 °F 6 2 °F). If one or both duplicates show more than slight viscosity increases or slight creaming, other evidence of stability must be sought. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Accelerated Aging of Liquid Water-Emulsion Floor Polishes

ICS
71.100.99
CCS
发布
2022-12-01
实施

项目 指标  Ⅰ类 Ⅱ类  特等品 优等品 特等品 优等品 一等品 合格品 总碱量(以Na2CO3计,以干基计)ω/%  ≥ 99.5 99.4 99.3 99.2 98.8 98.0 总碱量(以Na2CO3计,以湿基计)aω/%  ≥ 98.5 98.1 98.0  97.9 97.5 96.7 氯化钠(以NaCl计,以干基计)ω/%      ≤ 0.25 0.30 0.60 0.70 0.90 1.20 铁(Fe,以干基计)ω/%              ≤ 0.0020 0.0020 0.0020 0.0035 0.0055 0.0085 硫酸盐(以SO4计,以干基计)ω/%       ≤ 0.03 0.03 —  — — — 水不溶物ω/%                       ≤ 0.02 0.02 0.02 0.03 0.10 0.15 堆积密度b/(g/mL)                  ≥ 0.95 0.85 0.90 0.90 0.90 0.90 粒度b 180μm筛余物ω/%          ≥ 75.0 75.0 70.0 70.0 65.0 60.0  1.18mm筛余物ω/%         ≤ 2.0  2.0  — — — — a为包装时含量,交货时产品中总碱量乘以交货产品的质量再除以交货清单上产品的质量之值不应低于此值。 b为重质碳酸钠控制指标。

Sodiun carbonate for industrial use

ICS
71.100.99
CCS
C261
发布
2022-11-25
实施
2022-11-25

1.1 This test method covers the behavior of carbon refractories when subjected to the action of an alkali at an elevated temperature. This destructive condition as encountered in service is accelerated in the test to show in a short time the probable behavior of the carbon refractory during use. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Disintegration of Carbon Refractories by Alkali

ICS
71.100.99
CCS
发布
2022-11-01
实施

本文件规定了水性聚氨酯砂浆地坪材料绿色建材评价的一般要求、评价指标、评价方法。 本文件适用于水性聚氨酯砂浆地坪材料的绿色建材评价。

Evaluation of green building materials Waterborne polyurethane mortar flooring materials

ICS
71.100.99
CCS
C303
发布
2022-10-27
实施
2022-10-28

本文件规定了氢气气敏变色胶带的产品分类、技术要求、生产工艺、试验方法、检验规则及标志、包装、运输和贮存等要求。 本文件适用于因士(上海)科技有限公司的具有氢气气敏变色效果的胶带类产品。

Hydrogengassensitivecolor-changingtape

ICS
71.100.99
CCS
C266
发布
2022-10-21
实施
2022-10-21



Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号