71.120.10 反应容器及其组件 标准查询与下载

DIN 28132:2020 搅拌器. 搅拌器轴直径

This document specifies nominal diameters including diameters of shafts for agitators.

Agitators - Diameters of shafts for agitators

DIN 28131 Berichtigung 1:2018 搅拌容器的搅拌器和挡板 类型、术语和主要尺寸；勘误表 1

The document applies to agitators and provides for a better understanding about the concepts. It represents a series of agitator types which are often used in practice.

Agitators and baffles for agitator vessels - Types, terms and main dimensions; Corrigendum 1

T/ZZB 0665-2018 烟气脱硫吸收塔侧入式搅拌机

本标准规定了烟气脱硫吸收塔侧入式搅拌机（以下简称搅拌机）的术语和定义、型号、结构及主要参数、基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存及质量承诺。 本标准适用于烟气脱硫吸收塔侧入式搅拌机。

Side entry mixer for flue gas desulfurization absorption tower

HG/T 3139.7-2018 釜用立式减速机 ZF系列直圆柱圆锥齿轮减速机

Vertical reducer for kettle ZF series straight cylindrical bevel gear reducer

HG/T 3139.6-2018 釜用立式减速机 CF系列圆柱齿轮减速机

Vertical reducer for kettle CF series cylindrical gear reducer

HG/T 3139.1-2018 釜用立式减速机 型式和基本参数

Types and basic parameters of vertical reducer for kettle

HG/T 3139.4-2018 釜用立式减速机 LP系列平行轴齿轮减速机

Vertical reducer for kettle LP series parallel shaft gear reducer

DIN 28083:2017 带有加强板的支架

This standard applies to bracket supports for vessels. This standard allows a preselection of nominal sizes for bracket supports. In the course of the withdrawal of DIN 28083-2, a strength assesment has to be provided by the manufacturer in the future. This approach was taken into account when the document was drawn up.

Support brackets with reinforcing plate

T/ZZB 0242-2017 聚四氟乙烯衬里容器

本标准规定了聚四氟乙烯衬里容器的术语和定义、基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存及质量承诺。 本标准适用于以金属制反应釜、塔、槽、罐等容器作外壳，内衬采用聚四氟乙烯板材焊接或缠绕烧结工艺制造的衬里容器（以下简称衬里容器）；适用的设计压力PN≤2.5 MPa、公称直径DN≤3000 mm。

Polytetrafluoroethylene lining vessels

DIN 28006-1:2017 搅拌船的公差和极限偏差.第1部分:金属材料搅拌船

Tolerances and limit deviations for agitator vessels - Part 1: Agitator vessels of metallic materials

DIN 28006-2:2017 容器通用公差.第2部分:玻璃衬里搅拌容器

General tolerances for agitator vessels - Part 2: Glass lined agitator vessels

DIN 28007-2:2017 蒸馏塔通用公差.第2部分:玻璃衬里蒸馏塔

General tolerances for columns - Part 2: Glass lined columns

DIN 28005-2:2017 容器通用公差.第2部分:玻璃衬里容器

General tolerances for vessels - Part 2: Glass lined vessels

DIN 28082-2:2016 设备立式支架.第2部分:带爪的脚扣环或带攀缘的双扣环

Skirts for apparatus - Part 2: Bottom ring with bracket supports or twin ring with webs

DIN 28082-1:2016 设备用裙形架.第1部分:简易式底座环

Skirts for apparatus - Part 1: With simple bottom ring

DIN 7079-1:2015 抗压力的圆形玻璃－金属熔融观察镜.第1部分:用于带槽面夹持装置

Pressure resistant circular glass-to-metal fused sight glasses - Part 1: For holders with recess

DIN 28081-2:2015 容器支架 第2部分：容器用钢型材支架

Supports for vessels - Part 2: Steel profile supports for vessels

DIN 28081-1:2015 容器支座.第1部分:容器的管式支座

Supports for vessels - Part 1: Tubular supports for vessels

DIN 28080:2015 卧式器具鞍形支座

Saddle supports for horizontal apparatus

DIN 28137-1:2015 搅拌装置的安装法兰 第1部分：用于钢制容器

Mounting flanges for agitation units - Part 1: For vessels of steel