71.120.10 反应容器及其组件 标准查询与下载

DIN 28159 Bb.1:2006 外连接玻璃钢搅拌器的柄端.尺寸.附录1:强度信息

Shaft end for externally coupled glass lined steel agitators - Dimensions - Supplement 1: Information concerning strength

DIN 28144:2006 带双层玻璃钢搅拌器的组合搅拌器.尺寸

Agitator assembly for two piece glass lined steel agitators - Dimensions

DIN 28159:2006 外连接玻璃钢衬搅拌器的轴端.尺寸

This standard decribes the connection between agitator shaft and intermediate shaft for glass lined steel agitators according to DIN 28136-1.

Shaft end for externally coupled glass lined steel agitators - Dimensions

DIN 28161:2006 搅拌器传动要求.搅拌器速度和方向、轴承应用转动精确度和轴安装折卸空间

This standard applies to agitator drives according to DIN 28130 part 3 and specifies the following data: agitator speed and direction, bearing application, tolerances of running accuracy and dismounting space for shaft seal.

Requirements on agitator drives - Agitator speed and direction, bearing application running accuracy, dis-mounting space for shaft seal

DIN 28018:2006 玻璃纤维衬钢的压力容器.设备用0.063-10立方米的生产设备用容器

The document applies to cylindrical glass lined steel pressure vessels with nominal capacities from 0,063 up to 10 m, preferably used for process plants or for the storage of water polluting substances.

Pressure vessels, glass lined steel - Vessels for production plants 0,063 m<(hoch)3> up to 10 m<(hoch)3>

DIN 28021:2006 立式压力容器.6.3-100立方米贮存用容器.尺寸

The document applies to vertical cylindrical pressure vessels which are mainly used for installation in storage tanks.

Vertical pressure vessels - Vessels for storage, 6,3 m<(hoch)3> up to 100 m<(hoch)3> - Dimensions

DIN 28022:2006 立式压力容器.0.063-25立方米的加工设备用容器.尺寸

The document is to be applied to vertical cylindrical pressure vessels predominantly used for intermediate storage. Starting at the nominal diameter of 600, the sizes are a selection from DIN 28105.#,,#

Vertical pressure vessels - Vesels for process plants 0,063 m<(hoch)3> up to 25 m<(hoch)3> - Dimensions

DIN 28019:2006 玻璃纤维衬钢的压力容器.12.5-125立方米的储存用容器

The document applies to cylindrical glass lined steel pressure vessels with nominal capacities from 12,5 up to 125 m, preferably used for the storage of water polluting substances.

Pressure vessels, glass lined steel - Vessels for storage 12,5 m<(hoch)3> up to 125 m<(hoch)3>

HG/T 3796.4-2005 开启涡轮式搅拌器

本标准规定了开启涡轮式搅拌器的产品分类、结构与主要参数、技术要求、以及检验、包装和贮运等要求。 本标准适用于钢制开启涡轮式搅拌器。

Impeller of Open turbine

HG/T 3796.5-2005 圆盘涡轮式搅拌器

本标准规定了圆盘涡轮式搅拌器的产品分类、结构与主要参数、技术要求、以及检验、包装和贮运等要求。 本标准适用于钢制圆盘涡轮式搅拌器。

Impeller of disc turbine

HG/T 3796.10-2005 螺杆式搅拌器

本标准规定了螺杆式搅拌器的产品分类、结构与主要参数、技术要求，以及检验、包装和贮运等要求。 本标准适用于钢制螺杆式搅拌器。

Screw agitator

HG/T 3796.1-2005 搅拌器型式及基本参数

本标准规定了搅拌器型式及基本参数。 本标准适用于机械搅拌容器所设置的搅拌器，用于密度小于200Okg/m时的液一液、气-液、固-液两相及气-液-固三相介质进行各种物理和化学过程的搅拌。 其他用途的搅拌器亦可参照采用本标准。

Impeller types and parameters

HG/T 3796.2-2005 搅拌轴轴径系列

本标准适用于立式搅拌设备使用的搅拌轴。

Series of agitator shaft diameters

HG/T 3796.2-2006 搅拌轴轴径系列

Mixing shaft diameter series

HG 3158-2006 液化气体罐车用紧急切断阀

Emergency shut-off valve for liquefied gas tanker truck

HG/T 3796.12-2005 锚框式搅拌器

本标准规定了锚框式搅拌器的产品分类、结构与主要参数、技术要求，以及检验、包装和贮运等要求。 本标准适用于钢制锚框式搅拌器。

Anchor and gate type agitator

HG/T 3796.7-2005 三叶后弯式搅拌器

本标准规定了三叶后弯式搅拌器的产品分类、结构与主要参数、技术要求，以及检验、包装和贮运等要求。 本标准适用于钢制焊接三叶后弯式搅拌器。

Impeller with three backswept blades

HG/T 3796.11-2006 螺带式搅拌器

Ribbon mixer

HG/T 3796.11-2005 螺带式搅拌器

本标准规定了螺带式搅拌器的产品分类、结构与主要参数、技术要求，以及检验、包装和贮运等要求。 本标准适用于钢制螺带式搅拌器。

Helical ribbon agitator

HG/T 3796.1-2006 搅拌器型式及基本参数

Mixer type and basic parameters