71.120.10 反应容器及其组件 标准查询与下载

HG/T 3796.7-2005 三叶后弯式搅拌器

本标准规定了三叶后弯式搅拌器的产品分类、结构与主要参数、技术要求，以及检验、包装和贮运等要求。 本标准适用于钢制焊接三叶后弯式搅拌器。

Impeller with three backswept blades

HG/T 3796.8-2005 推进式搅拌器

本标准规定了推进式搅拌器的产品分类、结构与主要参数、技术要求，以及检验、包装和贮运等要求。 本标准适用于金属铸造型推进式搅拌器。

Propeller

HG/T 3796.10-2005 螺杆式搅拌器

本标准规定了螺杆式搅拌器的产品分类、结构与主要参数、技术要求，以及检验、包装和贮运等要求。 本标准适用于钢制螺杆式搅拌器。

Screw agitator

HG/T 3796.11-2005 螺带式搅拌器

本标准规定了螺带式搅拌器的产品分类、结构与主要参数、技术要求，以及检验、包装和贮运等要求。 本标准适用于钢制螺带式搅拌器。

Helical ribbon agitator

HG/T 3796.12-2005 锚框式搅拌器

本标准规定了锚框式搅拌器的产品分类、结构与主要参数、技术要求，以及检验、包装和贮运等要求。 本标准适用于钢制锚框式搅拌器。

Anchor and gate type agitator

HG/T 3796.9-2006 板式螺旋桨搅拌器

Plate propeller mixer

HG/T 3796.8-2006 推进式搅拌器

propeller mixer

HG/T 3796.7-2006 三叶后弯式搅拌器

Three-blade back-curved mixer

HG 3157-2006 液化气体罐车用弹簧安全阀

Spring safety valve for liquefied gas tanker

HG/T 3796.3-2006 桨式搅拌器

paddle mixer

HG/T 3796.5-2006 圆盘涡轮式搅拌器

Disc turbine mixer

HG/T 3796.10-2006 螺杆式搅拌器

screw mixer

HG/T 3796.6-2006 圆盘锯齿式搅拌器

Disc serrated mixer

HG 3158-2006 液化气体罐车用紧急切断阀

Emergency shut-off valve for liquefied gas tanker truck

DIN 28136-2:2005 搅拌容器.第2部分:非合金和不锈钢容器顶盖喷嘴的位置和尺寸

This standard is to be used for agitator vessels of carbon and stainless steel according to DIN 28136-1 and specifies the positions and sizes of cover nozzles.

Agitator vessels - Part 2: Positions and sizes of cover nozzles in non-alloy and stainless steel vessels

DIN 28136-1:2005 搅拌容器.第1部分:主要尺寸

The document applies to main dimensions of agitator vessels designed upon agreement without casing and semitubular coil jacket as well as with outer casing (AM) or semitubular coil jacket (HS).

Agitator vessels - Part 1: Principal dimensions

DIN 28136-3:2005 搅拌容器.第3部分:搪玻璃钢件搅拌容器顶盖喷嘴的位置和尺寸

The document applies to steel agitator vessels, glass-lined in accordance with DIN 28136-1 and specifies the position and sizes of cover nozzles. In addition, DIN 28136-3 also applies.

Agitator vessels - Part 3: Position and sizes of cover nozzles for glass lined steel agitator vessels

DIN 28034:2005 非合金钢制压力容器和加工装置用焊颈法兰

This standard specifies the dimensions and designation for welding neck flanges for pressure vessels and process apparatus of non-alloy steel to be used in accordance with DIN 28030-1 and DIN 28030-2. The requirements for flanged joints are specified in DIN 28030-1, the limit deviation in DIN 28030-2.#,,#

Non-alloy steel weld-neck flanges for pressure vessels and process apparatus

DIN 28032:2005 非合金钢制压力容器和加工装置用焊接法兰

Non-alloy steel weld flanges for pressure vessels and process apparatus

DIN 28036:2005 不锈钢制压力容器和加工装置用焊接法兰

Weld flanges for pressure vessels and process apparatus of stainless steel