71.120.10 反应容器及其组件 标准查询与下载

HG/T 3139.4-2001 釜用立式减速机LPJ系列圆柱齿轮减速机

本标准规定了LPJ系列两级、三级平行轴圆柱齿轮减速机(以下简称减速机)的产品分类、要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于石油化工、制药、轻工食品等釜用搅拌减速机以及其他用途的立式减速机。

Vertical reducer for tank series LPJ cylindrical gears reducer

HG/T 3139.5-2001 釜用立式减速机FJ系列圆柱圆锥齿轮减速机

本标准规定了门系列两级、三级圆柱圆锥齿轮减速机(以下简称减速机)的产品分类、要求、试验方法、检验规则、标志、包装、运输、贮存。 · 本标准适用于石油化工、冶金矿山、污水处理、制药等釜用搅拌减速机以及其他用途的立式减速机。

Vertical reducer for tank series FJ cyclindrical and cone gears reducer

HG/T 3139.6-2001 釜用立式减速机DC系列圆柱齿轮减速机

本标准规定了DC系列单级同轴线式圆柱齿轮减速机(以下简称减速机)的产品分类、要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于石油化工、制药、轻工食品及污水处理等釜用搅拌减速机以及其他用途的立式减速机。

Vertical reducer for tank series DC cylindrical gears reducer

HG/T 3139.7-2001 釜用立式减速机DJC系列圆柱齿轮减速机

本标准规定了DJC系列单级圆柱齿轮减速机(以下简称减速机)的产品分类、要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于石油化工、制药等釜用搅拌减速机以及其他用途的立式减速机。

Vertical reducer for tank Series DJC cylindrical gears reducer

HG/T 3139.8-2001 釜用立式减速机CW系列圆柱齿轮、圆弧圆柱蜗杆减速机

本标准规定了CW系列两级圆柱齿轮、圆弧圆柱蜗杆减速机(以下简称减速机)的产品分类、要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于石油化工、轻工食品、制药及水处理等釜用搅拌减速机以及其他用途的立式减速机。

Vertical reducer for tank series CW cylindrical gear and circle-arc tooth worm reducer

HG/T 3139.9-2001 釜用立式减速机P系列带传动减速机

本标准规定了P系列带传动减速机(以下简称减速机)的产品分类、要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于石油化工、制药、轻工食品及污水处理等釜用搅拌减速机以及其他用途的立式减速机。

Vertical reducer for tank series P belt-driving reducer

HG/T 3139.10-2001 釜用立式减速机FP系列带传动减速机

本标准规定了FP系列带传动减速机(以下简称减速机)的产品分类、要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于石油化工、制药、轻工、冶金矿山、水处理等釜用搅拌减速机以及其他用途的立式减速机。

Vertical reducer for tank series FP belt-driving reducer

HG/T 3139.12-2001 釜用立式减速机KJ系列可移式圆柱齿轮减速机

本标准规定了KJ系列可移式单级圆柱齿轮减速机(以下简称减速机)的产品分类、要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于石油化工、轻工食品、制药等需要移动场合的釜用搅拌减速机。

Vertical reducer for tank series KJ portable cylindrical gears mixer

ASTM C868-02(2012) 防护衬里耐化学侵蚀性的标准试验方法

1.1 This test method covers a procedure for evaluating the chemical resistance of a polymer-based protective lining in immersion service. The method closely approximates the service conditions, including the temperature differential between the external and internal surfaces of the equipment, which may accelerate permeation of the lining by a corrosive media. 1.2 This test may be used to simulate actual field use conditions insofar as a qualitative evaluation of the lining system after a predetermined period of exposure. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Chemical Resistance of Protective Linings

DIN 28005-2:2001 容器通用公差.第2部分:玻璃衬里容器

This document applies to general tolerances for glass lined storage tanks made of steel which are mainly used for the storage of substances.

General tolerances for vessels - Part 2: Glass lined vessels

DIN 28006-2:2001 容器通用公差.第2部分:玻璃衬里搅拌容器

The document applies to general toleranzes for agitator vessel primarily in accordance with DIN 28136-1 and DIN 28136-3, which are glass lines and predominantly used in process plants.#,,#

General tolerances for agitator vessels - Part 2: Glass lined agitator vessels

DIN 28145-1:1999 钢制搪瓷搅拌容器用焊接件.第1部分:标称直径2400-3600mm容器用S形挡板支座.连接尺寸.新设计的交互性

The document applies to the support for baffle, form S, on nozzles N4 and N9 for agitator vessels in accordance with DIN 28136-1 with nomonal diameter d1 = 2400 mm to 3600 mm for mounting nozzles in accordance with DIN 28136-14. This standard doers not apply to new designs, see here DIN 28146.#,,#

Parts welded to glass lined steel agitator vessels - Part 1: Support for baffle Form S for vessels nominal diameter 2400 to 3600 mm; connecting dimensions; interaktive for new design

DIN 28152-1:1999 搪玻璃容器用夹紧装置.第1部分:尺寸.配置

The document applies to clamps on glass lined steel vessels for operating temperature ranging from - 25 ?to 200 ?used for the connecting of vessels ports with welding necks according to DIN 28139-1 and vessel openings with welding necks according to DIN 28139-2 with covers according to DIN 28153-1 and DIN 28153-2. It applies to glass lined steel agitator vessels according to DIN 28136-1, with nozzle positions according to DIN 28136-3, DIN 28136-11 (inactive for new designs) and DIN 28136-13. Further, this standard specifies the size and number of clamps.#,,#

Clamps for glass lined vessels - Part 1: Dimensions, assignment

DIN 28151:1999 钢制搪玻璃搅拌容器用套管喷嘴.喷嘴位置

Nozzles of jacket on agitated vessels, of glass lined steel - Position of nozzles

DIN 28136-14:1999 搅拌容器.第14部分:BE型d1=2400-3600mm的搪玻璃钢搅拌容器用盖喷嘴的位置和大小, CE型d1=2400-3600mm的搪玻璃钢搅拌容器用喷嘴的位置和尺寸.不适用于新设计

The document applies to position and sizes of cover nozzles for glass lined steel agitator vessels form BE with d = 2400 mm to 3600 mm and position and sizes of cover nozzles for glass-lined steel agitator vessels, form CE with d = 2400 mm to 3600 mm in accordance with DIN 28136-1 which shall be replaced in existing plants.#,,#

Agitator vessels - Part 14: Position and sizes of cover nozzles for glass lined steel agitator vessels, position H for vessels form BE with d₁ = 2400 mm to 3600 mm and position K for vessels form CE with d₁ = 2400 mm to 3600 mm; inactive

DIN 28152-1 Bb.1:1999 搪玻璃容器用夹紧装置. 第1部分：尺寸、功用和最小参数的测定

Clamps for glass lined vessels - Part 1: Dimensions, assignment, determination of minimum quantity

DIN 7079-1:1999 抗压力的圆形玻璃－金属熔融观察镜.第1部分:用于带槽面夹持装置

The document is applicable to circular glass-to-metal fused sight with the sight glass fused into a steel ring which can be subjected to liquid or gas pressure on one side within a temperature range of -10 ?up to 300 ?in flanged holders in accordance with DIN 28120 or in straight pattern valves with circular sight glasses in accordance with DIN 3237-1.

Pressure resistant circular glass-to-metal fused sight glasses - Part 1: For holders with recess

DIN 7081:1999 低温范围内无限制的抗压长方形硼硅玻璃观察镜

Pressure resistant oblong sight glasses of borosilicate glass without limitation in the range of low temperature

SR 6808-1998 化工设备．带圆柱形罐的底部．一般质量技术要求

Prezentul standard stabile?te condi?iile tehnice generale de calitate pentru fundurile elipsoidale, fundurile sferice racordate ?n form? de m?ner de co?, fundurile semisferice ?i fundurile conice executate din tabl?, utilizate ?n industria chimic? ?i industrii similare. NOT? - Fundurile destinate recipientelor sub presiune trebuie s? corespund? ?i prevederilor din Prescrip?iile Tehnice ISCIR tn vigoare.

Equipment for chemical industry Bottoms for cylindrical tanks General technical requirements for quality

DIN 28146:1998 搅拌容器用玻璃衬里的钢制隔板.安装尺寸

This document specifies the mounting dimensions of glass lined steel baffles for agitator vessels.

Glass lined steel baffles for agitator vessels - Mounting dimensions