71.120.10 反应容器及其组件 标准查询与下载

DIN 28020:1998 0.63立方米至25立方米卧式压力容器.尺寸

This document is to be applied to lying cylindrical pressure vessels. Starting the sizes are a selection from DIN 28105.

Horizontal pressure vessels 0,63 m<(hoch)3> up to 25 m<(hoch)3> - Dimensions

DIN 28082-2:1996 设备立式支架.第2部分:带爪的脚扣环或带攀缘的双扣环.尺寸

The document specifies the dimensions of skirts predominantly used for process plants in the open air, which are designed to resist also loads due to wind pressure.#,,#

Skirts for apparatus - Part 2: Bottom ring with bracket supports or twin ring with webs; dimensions

DIN 28084-3:1996 设备支承环和环支承件.第3部分:非合金钢和不锈钢搅拌器容器的尺寸和最大工作重量

This document applies to support rings and ring supports used to suspend agitator vessels according to DIN 28136-1 form A and form B.

Support rings and ring supports on apparatus - Part 3: Dimensions, maximum service weight for on non-alloy and stainless steel agitator vessels

DIN 28084-2:1996 设备支承环和环支承件.第2部分:类型、尺寸和厚度计算

Support rings and ring supports on apparatus - Part 2: Types, dimensions, calculation of thickness

DIN 28084-1:1996 设备支承环和环支承件.第1部分:稳定性计算

This document applies to the calculation of stability of support rings and ring supports used to suspend apparatus in platform openings, predominantly in process plants.#,,#

Support rings and ring supports on apparatus - Part 1: Calculation of stability

DIN 7079-1 Bb.2:1996 耐压圆形熔结玻璃与金属的瞄准镜.第1部分:用于带凹槽支架.结构钢.工作温度-30℃和-60℃

Pressure resistant circular glass-to-metal fused sight glasses - Part 1: For holders with recess; design steel; operating temperatures -30 °C and -60 °C

DIN 7079-1 Bb.1:1996 耐压圆形玻璃-金属用视孔玻璃板.第1部分:带凹陷的支座.设计.材料牌号1.4462玻璃

Pressure resistant circular glass-to-metal used sight glasses - Part 1: For holders with recess; design, glass in material No. 1.4462

DIN 8902:1996 无低温范围限制的耐压氧化钠石灰玻璃制圆形视孔玻璃板

This document applies to circular sight glasses of tempered soda-lime-glass.

Pressure resistant circular sight glasses of soda-lime-glass without limitation in the range of low temperature

DIN 8903:1996 无低温范围限制的耐压氧化钠石灰玻璃制长形视孔玻璃板

This document applies to oblong sight glasses of tempered soda-lime-glass.

Pressure resistant oblong sight glasses of soda-lime-glass without limitation in the range of low temperature

DIN 28145-5:1995 搪玻璃钢搅拌容器用焊接件.第5部分:底部泄料孔处绝缘接头

The document applies to insulation collars for discharge valves and fittings according to DIN 28140-2 on glass lined steel agitator vessels according to DIN 28136-1 and DIN 28136-3.

Parts welded to glass lined steel agitator vessels - Part 5: Insulation collar at the bottom discharge opening

HG/T 2736-1995 石墨制三合一盐酸合成炉

本标准规定了以圆块式不透性石墨材料制造的三合一盐酸合成炉的结构塑式、规格尺寸、技术要求、试验方法、检验规则和标志、包装、运输、贮存的要求。 本标准适用于以氯气、氢气、水或稀盐酸为原料，集合成、吸收、冷却过程为一体生产盐酸的石墨制三合一盐酸合成炉。

Three-in-one hydrochloric acid synthesis furnace made of graphite

DIN 28153-1:1994 第1部分:口径公称尺寸为 DN　350 x 450、500 和 600 的玻璃衬里的仪器用闭锁盖

The document applies to covers of manholes and entrance openings on agitator vessels.

Covers for DN 350 450, 500 and 600 openings in glass-lined apparatuses

DIN 28153-2:1994 第2部分:口径公称尺寸为 DN 100 - DN　250 的玻璃衬里的仪器用闭锁盖

The document applies to covers with nozzles for DN 100 to 250 openings in agitator vessels.

Covers for DN 100 up to DN 250 openings in glass-lined apparatuses

DIN 28085:1994 安装用设备上的吊耳.尺寸和允许负载

This document applies to lifting lugs on vessels and apparatuses.

Lifting lugs on apparatuses for mounting; dimensions and allowable loadings

DIN 28145-4:1993 搪瓷搅拌容器的焊接零件.支撑环

The document applies to tubular and support rings fitted to glass lined steel agitator vessels with outer casing according to DIN 28136 part 1.

Parts welded to glass lined agitator vessels; support rings

DIN 28145-8 Bb.1:1993 搪瓷搅拌容器的焊接件.管状和外形支座.支座的制造

Parts welded to glass lined agitator vessels; tubular and profile supports; construction of supports

DIN 28145-3:1993 搪瓷搅拌容器用焊接件.挂吊耳的位置和尺寸

The document applies to lifting lugs at the upper and lower bottoms of agitator vessels.

Parts welded to glass lined agitator vessels; position and size of lifting lugs

DIN 28145-8:1993 搪瓷搅拌容器的焊接件.管子和外形支座

The document applies to tubular and profile supports on glass lined agitator vessels with jacket according to DIN 28136 part 1.

Parts welded to glass lined agitator vessels; tubular and profile support

DIN 28124-3:1992 不锈钢制压力容器用人孔盖

This document applies to manhole closures of stainless steels on vessels and equipment which predominantly serve for process purposes.

Manhole closures for pressure vessels of stainless steel

DIN 28124-4:1992 人孔盖.回转装置

This document is to be applied to davits at manhole closures according to DIN 28124 part 1 to part 3.

Manhole closures; swivel devices