71.120.10 反应容器及其组件 标准查询与下载

DIN 28124-2:1992 非合金钢制压力容器用人孔盖

This document applies to manhole closures of carbon steels and carbon steels with surface protection on vessels and equipment which predominantly serve for process purposes.

Manhole closures for pressure vessels of non-alloy steel

DIN 28124-1:1992 非合金钢和不锈钢制非压力容器和工艺装置用人孔盖

This draft standard applies to manhole closures of carbon steels, carbon steels with surface protection, and stainless steels on vessels and equipment without inner or outer overpressure which predominantly serve for process purposes.

Manhole closures for unpressurized vessels and process apparatus of nonalloy and stainless steel

DIN 28131:1992-09 搅拌容器用搅拌器和挡板.类型、术语和主要尺寸

The document applies to agitators and provides for a better understanding about the concepts. It represents a series of agitator types which are often used in practice.

Agitators and baffles for agitator vessels; types, terms and main dimensions

DIN 28136-11:1989 搅拌器.第11部分:玻璃纤维衬里的 CE 型公称容量为 4000 升更换用刚制搅拌器顶盖喷嘴的位置和尺寸

This standard shall be applied to the position and size of cover nozzles (position K) of agitator vessels of glass lined steel according to DIN 28136 part 1.

Agitator vessels; position and sizes of cover nozzles for glass lined steel agitator vessels, type CE, with a nominal volume of 4000 litres for replacement purposes

DIN 28125-1:1989 第1部分:额定直径 DN 150 - DN 600 的圆形绞链式闸板.

The standard is to be used for round hinged covers of carbon steel, carbon with surface coating, and stainless steel for vessels and equipment that preferably serve process purposes.

DN 150 to DN 600 round hinged closures

DIN 28125-2:1989 第2部分:椭圆形绞链式 350 mm x 450 mm 闸板

This standard is to be used for elliptical hinged covers 350 mm * 450 mm of carbon steel, carbon steel with surface coating, and stainless steel for vessels and equipment that preferably serve process purposes.

Hinged covers; elliptical, 350 mm 450 mm

DIN 28125-3:1989 具有保护环和表面涂层的圆形绞链式闸板.第3部分:额定直径 DN 500 和 DN 600

This standard is to be used for hinged covers of carbon steel with surface coating and protection ring for vessels and equipment that preferably serve process purposes.

Hinged covers; circular shape with protection ring and surface coated; DN 500 and DN 600

DIN 28058-2:1989 仪器工程用铅.第2部分:铅半成品的设计

This standard deals with the manufacture and testing of protective linings out of semi-finished lead products as well as with the design and construction of structures.

Lead used in apparatus engineering; lead of semi-finished product designs

DIN 28005-1:1988 容器的通用公差.第1部分:通用容器

This standard applies to dimensions without tolerance indication for vessels.

General tolerances for vessels; general-purpose vessels

DIN 28081-2:1988 容器的型钢支座.尺寸、材料和结构

This standard applies to profile supports for non-lined vessels which are predominantly used in process plants.

Vessel supports made of steel sections; dimensions, material and design

DIN 28081-4:1988 容器的型钢支座.第4部分:支承负荷通过支架作用于容器壁的最大弯曲力矩

This standard applies to profile supports for non-lined vessels which are predominantly used in process plants.

Steel profile supports for vessels; maximum permissible moments on the vessel wall due to profile support loads

DIN 28058-1:1987 仪器制造用铅.均质铅内衬

Lead used in apparatus engineering; homogeneous lead lining

DIN 28161:1987 搅拌器传动装置的要求.旋转速度和旋转方向，轴承应用转动精确度，轴密封环的折卸空间

Requirements on agitator drives; agitator speed and direction, bearing application running accuracy, dismounting space for shaft seal

DIN 28083-2:1987 托架托座.由A型托架托座负荷产生的作用在容器壁上的最大弯曲力矩

The moment given in this standard apply to bracket supports with reinforcing plates (form A) according to DIN 28083 part 1 on cylindrical casings, operated without overpressure or pressurized from 0,5 up to 6 bars.

Bracket supports; maximum bending moments imposed on the vessel wall resulting from type A bracket support loads

DIN 28083-1:1987 托架托座.尺寸和最大负荷

Bracket supports; dimensions and maximum loads

DIN 28060 Bb.1:1986 砖衬里的容器和设备.公差检验的试验方法示例

Brick-lined vessels and apparatus; examples for test methods for tolerances

DIN 28061:1986 容器和设备砖衬里.材料、制造、使用

This standard applies to the brick-lining of vessels and apparatus subjected to chemical, mechanical and/or thermal stresses according to DIN 28060.#,,#

Brick-lining of vessels and apparatus; materials, construction, operation

DIN 28060:1986 砖衬里的容器和设备.设计和结构

This standard applies to vessels and apparatus of steel which are to be protected by means of brick-linings resistant to chemical, mechanical and/or thermal stresses, as appropriate.

Brick-lined vessels and apparatus; design and construction

DIN 28050:1986 设备和容器.容许工作压力-0.2巴至0.1巴.交货技术条件

This standard is to be applied to metallic equipment and vessels used in process plants in which, due to the mode of operation, a pressure is present or can develop which is less than 0,1 bar ore more than - 0, bar.

Equipment and vessels; allowable working pressure -0,2 bar to 0,1 bar; technical delivery conditions

DIN 28130-2:1986 带搅拌装置的搅拌器.第2部分:玻璃纤维衬里的刚制搅拌器.术语、部件组合、一览表

The standard specifies agitator vessel details and gives a review of the variants of standardized components and component combinations resulting from use. It applies to agitator vessels of glass lined steel.

Agitator vessels with agitation unit; glass lined steel vessels; terms, component combinations, summary