共找到 1183 条与 铁矿 相关的标准,共 79 页
本文件规定了离子选择电极法测定氟含量的方法。 本文件适用于天然铁矿石、铁精矿和块矿,包括烧结产品中氟含量的测定。测量范围(质量分数):0.005%~1.00%。
Iron ores—Determination of fluorine content—Ion-selective electrode method
本文件规定了草酸盐重量法测定稀土总量的方法。 本文件适用于天然铁矿石、铁精矿和块矿,包括烧结产品中稀土总量的测定。测定范围(质量分数):1.00%~20.00%。
Iron ores—Determination of total rare earth contents—Oxalate gravimetric method
本文件规定了二硫代二安替吡啉甲烷分光光度法测定铋含量的方法。 本文件适用于铁矿石、铁精矿和块矿,包括烧结产品中铋含量的测定,测定范围(质量分数):0.0020%~0.200%。
Iron ores—Determination of bismuth content— Dithiodiantipyryl methane spectrophotometric method
GB/T38812 的本部分规定了三氯化铁分解重铬酸钾滴定法测定亚铁含量。 本部分适用于直接还原铁中亚铁含量的测定,测定范围(质量分数):1.00%~40.00%。
Direct reduced iron—Determination of iron(Ⅱ) content—The potassium dichromate titrimetric method after decomposition of sample by ferric chloride
本标准规定了用重铬酸钾滴定法测定焊条用还原钛铁矿粉中亚铁含量。 本标准适用于焊条用还原钛铁矿粉中亚铁含量的测定。 测定范围(质量分数):1.00%~10.00%。
Reduced ilmenite powder for welding rob—Determination of ferrous iron content—Potassium dichromate titrimetric method
GB/T6730 的本部分规定了电感耦合等离子体质谱法测定铁矿石中多种微量元素含量的方法。 本部分适用于铁矿石中的铅、镉、砷、汞、钡、钴、铊、钼、钇、镧、铈、镨、钕、钐、铕、钆、镝、钬、铒、铥、镱元素含量的测定,测定范围见表 1。
Iron ores—Determination of multiple trace elements—Inductively coupled plasma mass spectrometric method
GB/T6730 的本部分规定了 EDTA 滴定法测定铁矿石中钡含量。 本部分适用于天然铁矿石、铁精矿和块矿,包括烧结产品中钡含量的测定。 测定范围 (质量分数 ):2.00%~20.00%。
Iron ores—Determination of barium content—EDTA titrimetric method
GB/T38812 的本部分规定了三氯化铁分解重铬酸钾滴定法测定金属铁含量。 本部分适用于直接还原铁中金属铁含量的测定,测定范围(质量分数):≥50.00%。
Direct reduced iron—Determination of metallic iron content—The potassium dichromate titrimetric method after decomposition of sample by ferric chloride
GB/T38812 的本部分规定了电感耦合等离子体原子发射光谱法测定硅、锰、磷、钒、钛、铜、铝、砷、镁、钙、钾、钠的含量。 本部分适用于直接还原铁中下列元素的测定,各元素测定范围见表 1。
Direct reduced iron—Determination of silicon, manganese, phosphorus, vanadium, titanium, copper, aluminum, arsenic, magnesium, calcium, potassium and sodium content—Inductively coupled plasma atomic emission spectrometric method
Iron ores—Determination of mercury content—Cold atomic absorption spectrometric method
Iron ores—Determination of cadmium content—Hydride generation-atomic fluorescence spectrometric method
Iron ores—Determination of aluminum content—Flame atomic absorption spectrometric method
Iron ores—Determination of arsenic content—Hydride generation-atomic fluorescence spectrometric method
Iron ores—Determination of cadmium content—Graphite furnace atomic absorption spectrophotometric method
Iron ore fines in bulk—Determination of transportable moisture limits—Flow-table method
Iron ores—Determination of tin content—Flame atomic absorption spectrometric method
本标准规定了铁矿石中铅、砷、镉、汞、氟和氯的限量要求,取样和制样以及测定方法。 本标准适用于钢铁冶炼用天然和加工铁矿石。
Limit on element content of lead, arsenic, cadmium, mercury, fluorine and chlorine in iron ore
本标准规定了高炉和直接还原用铁球团矿抗压强度的测定方法。 本标准适用于高炉和直接还原用铁球团矿。
Iron ore pellets for blast furnace and direct reduction feedstocks.Determination of the crushing strength
GB/T 6730的本部分规定了火焰原子吸收光谱法测定铁矿石中钴含量。 本部分适用于铁矿石、铁精矿、烧结矿和球团矿产品中钴含量的测定。测定范围(质量分数):0.000 7%~0.06%。
Iron ores.Determination of cobalt content.Flame atomic absorption spectrometric method
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号