73.060.20 锰矿 标准查询与下载

ISO 4295:1988 锰矿石和锰精矿 铝含量的测定 光度法和重量法

The photometric method (A) is applicable to products having aluminium contents from 0,1 to 1,5 % (m/m), the oxine gravimetric method (B) is applicable to products having aluminium contents over 1,5 % (m/m). Cancels and replaces the first edition (ISO 4295:1978), of which it constitutes a technical revision. Should be read in conjunction with ISO 4297.

Manganese ores and concentrates; determination of aluminium content; photometric and gravimetric methods

JIS M 8236:1988 锰矿石中磷含量的测定方法

Methods for determination of phosphorus in manganese ores

NF A22-404*NF ISO 312:1987 锰矿石.二氧化锰表示的活性氧含量的测定.滴定法

Manganese ores. Determination of active oxygen content, expressed as manganese dioxide. Titrimetric method.

GOST 27308-1987 锰矿、精矿和烧结矿.铅含量测定法

Настоящий стандарт распространяется на марганцевые руды, концентраты и агломераты и устанавливает атомно-абсорбционный метод определен

Manganese ores, concentrates and agglomerates. Method for determination of lead

GOST 27309-1987 锰矿、精矿和烧结矿.氧化钡含量测定法

Настоящий стандарт распространяется на марганцевые руды, концентраты и агломераты и устанавливает гравиметрический метод определения о

Manganese ores, concentrates and agglomerates. Methods for determination of barium oxide

GOST 27561-1987 锰矿、精矿和烧结矿.用测定重量法测定水分含量

Метод основан на высушивании пробы в сушильном шкафу при (105+ -5) град. С до постоянной массы и определении потери ее массы

Manganese ores, concentrates and sinters. Gravimetric method for determination of moisture content

NF A22-406:1986 锰矿石和精矿.铅含量的测定.极谱法

Manganese ores and concentrates. Determination of lead content. Polarographic methods.

NF A22-405*NF ISO 7990:1986 锰矿石和精矿.总铁含量的测定.还原后的滴定法和磺基水杨酸分光光度计法

Manganese ores and concentrates. Determination of total iron content. Titrimetric method after reduction and sulfosalicylic acid spectrophotometric method.

NF A22-409:1986 锰矿石.铅含量的测定.重量测定法

Manganese ores. Determination of lead content. Gravimetric determination.

NF A22-410:1986 锰矿石.砷含量的测定.分光光度计法和容量测定法

Manganese ores. Determination of arsenic content. Spectrophotometric and volumetric determinations.

ISO 312:1986 锰矿石 二氧化锰表示的活性氧含量的测定 滴定法

This third edition cancels and replaces the second edition (ISO 312-1980), of which it constitutes a minor revision. Specifies principle, reagents, apparatus, sample, procedure and expression of results. A figure gives an example of apparatus.

Manganese ores; Determination of active oxygen content, expressed as manganese dioxide; Titrimetric method

ISO 7990:1985 锰矿石和锰精矿 铁的总含量的测定 还原后滴定法和磺基水杨酸分光光度法

Method A is applicable to products having a total iron content from 1 to 25 % (m/m), and method B is applicable to products having a total iron content from 0.2 to 2 % (m/m). ISO 7990 should be read in conjunction with ISO 4297. Specifies principle, reactions (method A only), reagents, apparatus, sampling and samples, procedure and expression of results.

Manganese ores and concentrates; Determination of total iron content; Titrimetric method after reduction and sulfosalicylic acid spectrophotometric method

ISO 7953:1985 锰矿石和锰精矿 钙和镁含量的测定 火焰原子吸收光谱法

The method is applicable to products having calcium contents from 0,01 to 15 % (m/m) and magnesium contents from 0,01 to 4 % (m/m). ISO 7953 should be read in conjunction with ISO 4297. Specifies principle, reagents, apparatus, sampling and samples, procedure and expression of results.

Manganese ores and concentrates; Determination of calcium and magnesium contents; Flame atomic absorption spectrometric method

ISO 7969:1985 锰矿石和锰精矿 钠和钾含量的测定 火焰原子吸收光谱法

The method is applicable to products having sodium contents from 0,02 to 1,0 % (m/m), and potassium contents from 0,08 to 3,0 % (m/m). ISO 7969 should be read in conjunction with ISO 4297. Specifies principle, reagents, apparatus, sampling, procedure and expression of results.

Manganese ores and concentrates; Determination of sodium and potassium contents; Flame atomic absorption spectrometric method

ISO 4300:1984 锰矿石和锰精矿铅含量的测定极谱法

Manganese ores and concentrates — Determination of lead content — Polarographic methods

ISO 4294:1984 锰矿石和锰精矿 铜含量的测定 萃取光谱法和光谱法

The extraction-spectrometric method (A) is applicable to products having copper contents up to 0,5 % (m/m), the spectrometric method (B) is applicable to products having copper contents from 0,1 to 1 % (m/m). Cancels and replaces the first edition (ISO 4294-1978), of which it constitutes a minor revision. ISO 4294 should be read in conjunction with ISO 4297.

Manganese ores and concentrates; Determination of copper content; Extraction-spectrometric and spectrometric methods

ISO 4298:1984 锰矿石和锰精矿 锰含量的测定 电位滴定法

The method is applicable to the determination of a manganese content equal to or greater than 15 % (m/m). ISO 4298 should be read in conjunction with ISO 4297. Specifies principle, reactions, reagents, apparatus, sampling, procedure and expression of results.

Manganese ores and concentrates; Determination of manganese content; Potentiometric method

ISO 315:1984 锰矿石和锰精矿 镍含量的测定 丁二酮肟光谱测定法和火焰原子吸收光谱法

Two methods are specified. Method A is applicable to products having a nickel content of 0.01 to 1.0 % (m/m), method B is applicable to products having a nickel content of 0.005 to 1.0 % (m/m). Both methods specify principle, reactions (method A only), reagents, apparatus, sample, procedure and expression of results.

Manganese ores and concentrates; Determination of nickel content; Dimethylglyoxime spectrometric method and flame atomic absorption spectrometric method

ISO 7723:1984 锰矿石和锰精矿 钛含量的测定 4,4' 二安替比林基代甲烷光谱法

The method is applicable to products having a titanium content of 0,01 to 0,5 % (m/m). ISO 7723 should be read in conjunction with ISO 4297. Specifies principle, reagents, apparatus, sample, procedure and expression of results.

Manganese ores and concentrates; Determination of titanium content; 4,4'-Diantipyrylmethane spectrometric method

ISO 4296-1:1984 锰矿石 取样 第1部分:份样取样

Specifies methods for taking samples of manganese ores to be used at the places of dispatch and acceptance of ores for determining the chemical composition and moisture content of a consignment.The methods are applicable to both the manual and mechanical sampling of natural or processed ores. Details of the hammer and shovel method are given in the annex.

Manganese ores; Sampling; Part 1 : Increment sampling