共找到 565 条与 其他金属矿 相关的标准,共 38 页
Methods for chemical analysis of gold ores - Part 15: Determination of copper, lead, zinc, silver, iron, manganese, nickel, cobalt, aluminum, chromium, cadmium, antimony, bismuth, arsenic, mercury, selenium, barium and beryllium by inductively coupled pla
本文件规定了金矿石中铁量的测定方法。 本文件适用于金矿石中铁量的测定。测定范围:质量分数为1.00%~10.00%。
Methods for chemical analysis of gold ores - Part 7: Determination of iron content
本文件规定了金矿石中硫量及有效硫量的测定方法。 本文件适用于金矿石中硫量及有效硫量的测定。方法1、方法3 测定范围:质量分数为1.00%~20.
Methods for chemical analysis of gold ores - Part 8: Determination of sulfur content
本文件规定了金精矿中硫量及有效硫量的测定方法。 本文件适用于金精矿中硫量及有效硫量的测定。测定范围:质量分数为5.00%~50.00%。
Methods for chemical analysis of gold concentrates—Part 8: Determination of sulfur content
本文件规定了金精矿中铁量的测定方法。 本文件适用于金精矿中铁量的测定。测定范围:质量分数为1.00%~40.00%。
Methods for chemical analysis of gold concentrates—Part 7: Determination of iron content
本文件规定了金矿石中铜量的测定方法。 本文件适用于金矿石中铜量的测定。方法1测定范围:0.010%%一2.00%;方法2测定范围:2.00听一10.00邮。
Methods for chemical analysis of gold ores—Part 4: Determination of copper content
本文件规定了金精矿中铅量的测定方法。 本文件包括方法1和方法2两种测定方法。方法1适用于金精矿中铅量的测定,测定范围:0.10%~5.00%;方法2适用于钡含量小于1%的金精矿中铅量的测定,测定范围:>5.00%~50.00%。
Methods for chemical analysis of gold concentrates—Part 5: Determination of lead content
本文件规定了金矿石中铅量的测定方法。 本文件包括方法1 和方法2 两种测定方法。方法1 适用于金矿石中铅量的测定,测定范围:0.10%%一5.00%%;方法2 适用于钢含量小于1%%的金矿石中铬量的测定,测定范围:之5.00办一15.00儿。
Methods for chemical analysis of gold ores—Part 5: Determination of lead content
本文件规定了金精矿中锌量的测定方法。 本文件适用于金精矿中锌量的测定。
Methods for chemical analysis of gold concentrates—Part 6: Determination of zinc content
本文件规定了金矿石中镑量的测定方法。 本文件适用于金矿石中锌量的测定。测定范围:0.050折一2.00儿。
Methods for chemical analysis of gold ores—Part 6: Determination of zinc content
本文件规定了金精矿中铜量的测定方法。 本文件适用于金精矿中铜量的测定。方法1 测定范围:0.050%~2.00%;方法2 测定范围:2.
Methods for chemical analysis of gold concentrates—Part 4: Determination of copper content
GB/T20899的本部分规定了金矿石中金量的测定方法。 本部分适用于金矿石中金量的测定。
Methods for chemical analysis of gold ores—Part 1:Determination of gold content
GB/T7739的本部分规定了金精矿中金量和银量的测定方法。 本部分方法1适用于金精矿中金量和银量的测定,方法2方法3适用于金精矿中金量的测定。 方法1测定范围: 金10.0g/t-550.0g/t, 银200.0g/t~-12000.0g/t 方法2测定范围: 10.0g/t-150.0g/t 方法3测定范围: 10.0g/t-150.0g/t。
Methods for chemical analysis of gold concerntrates—Part 1:Determination of gold and silver contents
Methods for chemical analysis of gold concentrates—Part 2:Determination of silver content—Flame atomic absorption spectrometric method
Methods for chemical analysis of gold concerntrates—Part 3:Determination of arsenic content
Methods for chemical analysis of gold ores—Part 3:Determination of arsenic content
Methods for chemical analysis of gold ores一Part 2:Determination of silver content 一Flame atomic absorption spectrometric method
GB/T29509 的本部分规定了载金炭中金量的测定方法慢本部分适用于载金炭中金含量的测定。 测量范围黜侧0 g/丨N10 0000 g/t。 2 火试金重量法(仲裁法)
Methods for chemical analysis of gold-loaded carbon.Part 1:Determination of gold content
GB/T 29509的本部分规定了载金炭中银量的测定方法。本部分适用于载金炭中银量的测定。测定范围:10.0 g/t~2 500.0 g/t。
Methods for chemical analysis of gold-loaded carbon.Part 2:Determination of silver content.Flame atomic absorption spectrometry
警告:使用本标准的人员应有正规实验室工作的实践经验。本标准并未指出所有可能的安全问题。使用者有责任采取适当的安全和健康措施,并保证符合国家有关法规规定的条件。 GB/T 17417的本部分规定了稀土矿石中15个稀土元素分量的测定方法。 本标准适用于稀土矿石,也适用于铍矿石,锂、铷、铯矿石,锆矿石和岩石中15个稀土元素分量的测定。 稀土氧化物的测定范围:0.xμg/g~2*10μg/g。
Method for chemical analysis of rare earth ores.Part 1:Dtermination of rare earths
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号