共找到 565 条与 其他金属矿 相关的标准,共 38 页
Copper sulfide concentrates-Determination of copper content-Electrogravimetric method
Copper, lead and zinc sulfide concentrates. Determination of transportable moisture limits. Flow-table method
This document specifies a flow-table method for the determination of the transportable moisture limit (TML) of copper, lead and zinc sulfide concentrates, which can liquefy during transport. It is applicable to the determination of the TML of concentrates containing 10 % to 80 % (mass fraction) of lead, 10 % to 65 % (mass fraction) of zinc or 10 % to 55 % (mass fraction) of copper and is applicable to TML values in the range 3 % to 28 % (mass fraction).
Copper, lead and zinc sulfide concentrates - Determination of transportable moisture limits - Flow-table method
What is ISO 15661 - Alkaline fusion and potentiometric titration method about? ISO 15661 specifies an analytical method for the determination of total chlorine content using alkaline fusion and potentiometric titration. The method described in ISO 15661 is applicable to copper and nickel sulfide ores and concentrates having chlorine content in the following ranges: Method 1: 80 μg/g to 4 300 μg/g
Copper and nickel sulfide ores and concentrates. Determination of total chlorine content. Alkaline fusion and potentiometric titration method
This document specifies an analytical method for the determination of total chlorine content using alkaline fusion and potentiometric titration. This method is applicable to copper and nickel sulfide ores and concentrates having chlorine content in the following ranges: a) Method 1: 80 µg/g to 4300 µg/g b) Method 2: 70 µg/g to 4300 µg/g
Copper and nickel sulfide ores and concentrates — Determination of total chlorine content — Alkaline fusion and potentiometric titration method
BS ISO 12743 AMD1. Copper, lead, zinc and nickel concentrates. Sampling procedures for determination of metal and moisture content
1.1 This practice covers the sample drying step for the determination of mercury in ores, concentrates, and related metallurgical materials. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Practice for Drying of Metal Bearing Ores, Concentrates, and Related Metallurgical Materials for the Determination of Mercury
本标准规定了除磷剂选铜尾砂的技术要求、分析方法、检验规则、标志、包装、运输和贮存。 本标准适用于除磷剂选铜尾砂的质量和有害成分的检验。 本标准不适用于经化学处理使选铜尾砂的结构和组分发生本质改变的加工制成品。
Dephosphorization agent for selecting copper tailings
What is ISO 19976 ‑ 1 - Flame atomic absorption spectrometric method about? ISO 19976 ‑ 1 specifies a flame atomic absorption spectrometric method for the determination of the mass fraction of cadmium in copper, lead and zinc sulfide concentrates as follows: For copper sulfide concentrates, the method is applicable to the determination of mass fractions of cadmium from 0,01 % to 0,30 % For lead sulfide concentrates, the method is applicable to the determination of mass fractions of cadmium from 0,01 % to 0,30 % For zinc sulfide concentrates, the method is applicable to the determination of mass fractions of cadmium from 0,05 % to 0,30 % Who is
Copper, lead and zinc sulfide concentrates. Determination of cadmium - Flame atomic absorption spectrometric method
What is ISO 19976‑2 - D etermination of cadmium using ICP-AES about? ISO 19976‑2 specifies an acid digestion and inductively coupled plasma atomic emission spectrometric (ICP-AES) method for the determination of the mass fraction of cadmium in copper, lead and zinc sulfide concentrates as follows: For copper sulfide concentrates, the method is applicable to the determination of mass fractions of cadmium from 0,01 % to 0,30 % For lead sulfide concentrates, the method is applicable to the determination of mass fractions of cadmium from 0,01 % to 0,30 %
Copper, lead and zinc sulfide concentrates. Determination of cadmium - Acid digestion and inductively coupled plasma atomic emission spectrometric method
This document specifies an acid digestion and inductively coupled plasma atomic emission spectrometric (ICP-AES) method for the determination of the mass fraction of cadmium in copper, lead and zinc sulfide concentrates as follows: a) for copper sulfide concentrates, the method is applicable to the determination of mass fractions of cadmium from 0,01 % to 0,30 %; b) for lead sulfide concentrates, the method is applicable to the determination of mass fractions of cadmium from 0,01 % to 0,30 %; c) for zinc sulfide concentrates, the method is applicable to the determination of mass fractions of cadmium from 0,05 % to 1,00 %.
Copper, lead and zinc sulfide concentrates — Determination of cadmium — Part 2: Acid digestion and inductively coupled plasma atomic emission spectrometric method
Copper, lead and zinc sulfide concentrates — Determination of cadmium — Part 1: Flame atomic absorption spectrometric method
Copper, lead and zinc ores and concentrates — Precision and bias of mass measurement techniques
Copper, lead and zinc ores and concentrates — Precision and bias of mass measurement techniques
General rule for chemical analysis of titanium ores
Determination of gold and silver in blister copper
Copper, lead and zinc ores and concentrates — Precision and bias of mass measurement techniques
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号