共找到 161 条与 通风、空调和照明设备 相关的标准,共 11 页
Caplights for use in mines susceptible to firedamp - Part 2 : performance and other safety-related matters.
This part of IEC 62013 details those performance and other safety features of caplights, including those with a point of connection for another apparatus, not covered in IEC 62013-1, but which are important for the safety and working conditions of the user. It may also be applied to caplights for use in mines not likely to be endangered by firedamp. When this part of the standard is used as a "stand-alone" document for non-gassy mines, any relevant constructional requirements should be the subject of agreement between the supplier and the user and, where possible, be as described in IEC 62013-1.
Caplights for use in mines susceptible to firedamp - Performance and other safety-related matters
This document applies to air shutter frames and air doors for ventilation structures which are to remain functional after the passage of explosions with overpressures of up to 2 bar.
Explosion prevention and protection in underground mines - Protective systems - Part 1: 2-bar explosion proof ventilation structure
This part of IEC 62013 specifies requirements for the construction and testing of caplights, including caplights with a point of connection for another apparatus, for use in mines susceptible to firedamp (Group I - electrical apparatus for explosive gas atmospheres as defined in IEC 60079-0). It deals only with the risk of the caplight becoming a source of ignition. NOTE 1 The requirements for performance are in IEC 62013-2 1. The requirements of IEC 60079-0 do not apply unless specified. This standard is also applicable to caplights intended for use in mines which have become temporarily endangered by an explosive gas atmosphere, for example in mine rescue operations. NOTE 2 The use in such circumstances is dependent on a user's risk assessment. Caplights complying with this standard are intended for personal use under normal conditions of: Temperature: 0 °C to +40 °C Pressure: 0,8 bar to 1,1 bar NOTE 3 In designing apparatus for operation in conditions other than those given above, this standard may be used as a guide; however, additional testing may be required.
Caplights for use in mines susceptible to firedamp - Part 1: General requirements - Construction and testing in relation to the risk of explosion
This part of IEC 62013 details those performance and other safety features of caplights, including those with a point of connection for another apparatus, not covered in IEC 62013-1, but which are important for the safety and working conditions of the user. It may also be applied to caplights for use in mines not likely to be endangered by firedamp. When this part of the standard is used as a "stand-alone" document for non-gassy mines, any relevant constructional requirements should be the subject of agreement between the supplier and the user and, where possible, be as described in IEC 62013-1.
Caplights for use in mines susceptible for firedamp - Part 2: Performance and other safety-related matters
本标准规定了煤矿在用主通风机系统安全检测检验的条件、要求、方法和技术要求。 本标准适用于全国范围内安装在工作网路上的在用主通风机系统的一个工况点或多个工况点性能参数、故障诊断、振动、噪声、轴承和电动机定子温升、外观质量、证件审查、安全防护及设施、电动机参数的检验。也适用于维修后的煤矿主通风机系统的安全检验。
Safety inspecting-testing specification of main using fan system for coal mine
Specifications for safety inspection and inspection of in-use air compressors in coal mines
Specifications for safety inspection and inspection of main ventilator system in use in coal mines
Explosion-proof lamps for coal mines
本标准规定了煤矿用防爆灯具(以下简称灯具)的产品分类、要求,试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于具有甲烷或煤尘爆炸危险的煤矿井下工作面、巷道、硐室以及移动式设备上作照明用的灯具,不适用于矿用安全帽灯。
Explosion proof lamp for coal mine
This standard specifies the ergonomic and lighting fundamentals for the planning of lighting installations for workshops and special premises in underground hardcoal mining.
Underground lighting in hardcoal mining - Lighting-technological planning bases - Part 10: Workshops and special premises
本标准规定了KL型矿灯的产品分类;要求、试验方法、检验规则、标志、包装、运输及贮存。 本标准适用于KL型矿灯(以下简称矿灯)。
Model KL cap lamp
本标准规定了KJ型矿灯的产品分类、要求、试验方法、检验规则、标志、包装、运输及贮存。 本标准适用于KJ型矿灯(以下简称矿灯)。
Model KJ cap lamp
本标准规定了KS型矿灯的产品分类、要求、试验方法、检验规则、标志、包装、运输及贮存。 本标准适用于KS型矿灯(以下简称矿灯)。
Model KS cap lamp
This document applies to air shutter frames and air doors for ventilation structures which are to remain functional after the passage of explosions with overpressures of up to 2 bar.
Explosion prevention and protection in underground mining - Protective systems - Part 1: 2-bar explosion proof ventilation structure
The document specifies the requirements for travel-way air locks in level and inclined mine excavations of mining. Travel-way air locks are built in connection with air locks. They allow travelling miners to pass the air lock without danger and to avoid air pressure reductions.
Corrigenda to DIN 21639:1999-09
Thermal anemometer for mines-Portable type
The document specifies the ergonomic and lighting fundamentals for the planning of lighting installations for building sites in underground hardcoal mining. This standard describes requirements for the illuminance and the arrangement of lighting. The terms building site and motional area are defined.
Underground lighting in hardcoal mining - Lighting-technological planning bases - Part 8: For building sites
This standard applies to air locks for conveyors in mine excavation. They regulate the air within the region of conveyors. They are part of the air locks and are assembled in the air lock frame.
Air regulation systems in mining - Belt-conveyors-way air locks - Dimensions, identifications, requirements and testing
The document specifies the ergonomic and lighting fundamentals for the planning of lighting installations for material handling places. It defines the term material handling places. Lighting installations shall fulfil the following requirements: clearness of the driveway, working place and transportation area and to facilitate hazard identification especially while working with machines and mechanical equipment as well as to identify people and objects from an adequate distance.#,,#
Underground lighting in hardcoal mining - Lighting-technological planning bases - Part 5: Material handling places
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号