75.100 润滑剂、工业油及相关产品 标准查询与下载

ASTM E2563-23 用平板计数法计数含水金属加工液中非结核分枝杆菌的标准实施规程

Standard Practice for Enumeration of Non-Tuberculosis Mycobacteria in Aqueous Metalworking Fluids by Plate Count Method

ASTM D8114-23a VIE火花点火顺序中汽车发动机油对乘用车和轻型卡车燃油经济性影响测量的标准试验方法

Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIE Spark Ignition

ASTM D7918-23 用模具挤压法和制备法测量润滑脂的流动特性和磨损、污染物和氧化特性评定的标准试验方法

Standard Test Method for Measurement of Flow Properties and Evaluation of Wear, Contaminants, and Oxidative Properties of Lubricating Grease by Die Extrusion Method and Preparation

GSO 1785-2:2023 内燃机润滑油 第2部分：ACEA 欧洲汽油发动机和柴油发动机用油序列

This Gulf document is concerned with lubricating oils for internal combustion engines suitable for Gasoline and Light duty diesel engine, Engines with after treatment devices and Heavy-duty diesel engines excluding marine application according to ACEA performance classifications.

Lubricating Oils for Internal Combustion Engines – Part 2: ACEA European Oil Sequences for Gasoline Engines and Diesel Engines

GSO 1163:2023 基础油 分类、规格和测试方法

This standard covers the characteristics and property of base oils, used as lubrication grade oils that initially produced from: a) Refining of crude oil (Mineral base oil) b) Chemical synthesis (Synthetic base oil) c) Re-refined Base Oil (Recycled Base Oil)

Base Oils – Classification, Specifications and Test Methods

GSO ISO 13503-6:2023 石油和天然气工业完井液和材料 第6部分：动态条件下完井液泄漏测量程序

ISO 13503-6:2014 provides consistent methodology for measuring the fluid loss of completion fluids under dynamic conditions. ISO 13503-6:2014 is applicable to all completion fluids except those that react with porous media.

Petroleum and natural gas industries — Completion fluids and materials — Part 6: Procedure for measuring leakoff of completion fluids under dynamic conditions

GSO ISO 6521-1:2023 润滑油、工业油及相关产品（L级）—D系列（压缩机）— 第1部分：DAA和DAB类规范（往复式和滴注式旋转空气压缩机用润滑油）

This document specifies the minimum requirements for mineral or synthetic based lubricants intended for use in reciprocating and drip feed rotary air compressors (vane compressors) with the compression chamber(s)/cylinders lubricated by direct lubricant injection. NOTE This document can be read in conjunction with ISO 6743-3[1].

Lubricants, industrial oils and related products (Class L) — Family D (compressors) — Part 1: Specifications of categories DAA and DAB (lubricants for reciprocating and drip feed rotary air compressors)

GSO ASTM D2272:2023 通过旋转压力容器测定汽轮机油氧化稳定性的标准试验方法

  Scope is not provided for this standard

Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel

GSO ISO/TS 6521-2:2023 润滑油、工业油及相关产品（L 级）—D 系列（压缩机）— 第2部分：DAG、DAH 和 DAJ 类别规范（满液式旋转空气压缩机润滑油）

This document specifies the minimum requirements for mineral or synthetic based lubricants, as delivered, and intended for use in flooded rotary air compressors (vane and screw). This document can be read in conjunction with ISO 6743-3. NOTE      For the purposes of this document, the term “% (m/m)” is used to represent the mass fraction of a material.

Lubricants, industrial oils and related products (Class L) — Family D (Compressors) — Part 2: Specifications of categories DAG, DAH and DAJ (Lubricants for flooded rotary air compressors)

GSO ISO 26422:2023 石油及相关产品 含聚合物润滑油剪切稳定性的测定 使用圆锥滚子轴承的方法

ISO 26422:2014 specifies a method of determining the shear stability of polymer-containing lubricating oils by the four-ball machine as specified in ISO 20623, but using a tapered roller bearing. The test results allow prediction of the in-service permanent viscosity loss. NOTE Other International Standards exist which evaluate viscosity loss of polymer-containing oils. The method specified within this International Standard subjects fluids to a higher shear rate than, for example, the diesel injector nozzle shear test described within ISO 20844.[3] It is particularly appropriate for lubricants being used in high shear applications, such as components with gears and roller bearings. In such applications, the shear rate in the ISO 20844 test method can be too low to generate a realistic permanent loss in viscosity of the fluid.

Petroleum and related products — Determination of shear stability of lubricating oils containing polymers — Method using a tapered roller bearing

GSO ISO 13503-3:2023 石油和天然气工业完井液和材料 第3部分：重盐水测试

This document covers the physical properties, potential contaminants and test procedures for heavy brine fluids manufactured for use in oil and gas well drilling, completion, and workover fluids. This document supplements API RP 13J, 5th edition (2014), the requirements of which are applicable with the exceptions specified in this document. This document provides more suitable method descriptions for determining the formate brines pH, carbonate/bicarbonate concentrations and crystallization temperature at ambient pressure compared to the methods provided by API RP 13J, 5th edition (2014). This document is intended for the use of manufacturers, service companies and end-users of heavy brines.

Petroleum and natural gas industries — Completion fluids and materials — Part 3: Testing of heavy brines

23/30476834 DC BS ISO 12925-1 润滑油、工业油及相关产品（L 级） C 系列（齿轮） 封闭式齿轮系统润滑剂规范

BS ISO 12925-1 Lubricants, industrial oils and related products (class L). Family C (gears) - Specifications for lubricants for enclosed gear systems

BS ISO 11007-1:2021+A1:2023 石油产品和润滑油 润滑脂防锈特性的测定 动态潮湿条件

Petroleum products and lubricants. Determination of rust-prevention characteristics of lubricating greases - Dynamic wet conditions

T/CC 8-2023 盾构机盾尾密封油脂

在盾构掘进过程中，需要在盾尾刷之间注入盾尾密封油脂，从而确保高度的水密性，盾尾密封系统通过盾尾腔油脂压力与注浆压力和地下水土压力平衡实现隧道内外环境的隔离，避免管片外侧的水、土、同步注浆浆液渗入盾构机内部。一旦密封失效，盾尾将发生喷涌，同步注浆浆液和地下水、泥砂进入隧道会造成极大的安全威胁。盾尾密封油脂作为盾构施工中重要的功能材料，保障盾尾密封安全，一旦盾尾油脂质量不佳或者用量、压力不足，极易造成盾尾密封效果不好甚至盾尾密封失效。基于以上现状，开展盾构机盾尾密封油脂验收标准研究，确定盾尾密封油脂关键性能指标，研发盾尾密封油脂性能测试系统及方法，制定出盾构机盾尾密封油脂验收标准，合理检验与评价盾尾密封油脂的性能，保证盾尾密封效果，确保盾尾刷的有效性，保障工程顺利开展。 本文件主要技术内容如下： 1）产品分类：按照使用方式分类，分为泵送型和手涂型； 2）技术要求：规定了盾尾密封油脂的物理性能指标及环保性能指标、建设用地土壤污染风险筛选值、地下水（Ⅲ类）质量指标限值、挥发性有机物职业接触限值、浸出毒性鉴别标准值的要求； 3）试验方法：规定了标准试验条件，以及外观、密度、酸碱值、闪点、下垂度、抗剥离强度、泵送性、锥入度、耐水压密封性、抗水流冲失、蒸发损失、保油性、对金属腐蚀性、对橡胶腐蚀性、重金属及无机元素、挥发性有机物、生物毒性的试验要求； 4）检验规则：规定了检验分类、检验项目、组批与抽样、判定规则的要求； 5）标志、包装、运输、贮存：标志、包装、运输、贮存可按照NB/SH/T 0164规定进行。

Shield tail sealing grease of the shield machine

ASTM D6439-23 蒸汽、燃气和水轮机润滑系统的清洁、冲洗和净化标准指南

1.1  This guide covers types of contaminants, oil purification devices, contamination monitoring, contamination control during building or refurbishing of turbine systems, lubrication system flushing, and maintenance of pure lubrication oil. 1.2  To obtain maximum operating life and reliability, or lubricants and system, it is vital that the turbine lubrication system has pure oil. This guide is intended to aid the equipment manufacturer, installer, and turbine operator in coordinating their efforts to obtain and maintain clean lubrication and control systems. These systems may be on land or marine turbine generators and propulsion and mechanical drive equipment. This guide is generalized due to variations in the type of equipment, builder's practices, and operating conditions. 1.3  This guide primarily addresses petroleum based lubricating oil. For systems using nonpetroleum based fluids, this guide may not be appropriate. For nonpetroleum products, consult the equipment and fluid manufacturers. 1.4  This guide is applicable to both large and small lubrication systems. Some equipment specified herein, however, may not be appropriate for all systems. Moreover, in situations where specific guidelines and procedures are provided by the equipment manufacturer, such procedures should take precedence over the recommendations of this guide. 1.5  This standard does not purport to address the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6  This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Cleaning, Flushing, and Purification of Steam, Gas, and Hydroelectric Turbine Lubrication Systems

ISO/FDIS 12921:2023 石油产品和润滑剂 - 水存在下润滑脂机械稳定性的测定

Petroleum products and lubricants — Determination of the mechanical stability of greases in presence of water

ISO/DIS 3987:2023 石油产品 润滑油和添加剂中硫酸盐灰分和脂肪酸甲酯的测定

Petroleum products — Determination of sulfated ash in lubricating oils and additives and fatty acid methyl esters

ISO 15380:2023 润滑油、工业用油及相关产品（L 级） — H 系列（液压系统） — HETG、HEPG、HEES 和 HEPR 类液压油规范

Lubricants, industrial oils and related products (class L) — Family H (Hydraulic systems) — Specifications for hydraulic fluids in categories HETG, HEPG, HEES and HEPR

ISO/DIS 12925-1:2023 润滑油、工业油及相关产品（L级） C系列（齿轮） 第1部分：闭式齿轮系统润滑油规范

Lubricants, industrial oils and related products (class L) — Family C (gears) — Part 1: Specifications for lubricants for enclosed gear systems

ASTM D4742-23 用薄膜吸氧法（TFOUT）测定汽油汽车发动机油氧化稳定性的标准试验方法

Standard Test Method for Oxidation Stability of Gasoline Automotive Engine Oils by Thin-Film Oxygen Uptake (TFOUT)