75.120 液压液 标准查询与下载

ISO/DIS 10050:2023 润滑油、工业用油及相关产品（L 级） T 系列（涡轮机） 三芳基磷酸酯涡轮机控制液规格（ISO-L-TCD 类别）

Lubricants, industrial oils and related products (class L) — Family T (Turbines) — Specifications of triaryl phosphate ester turbine control fluids (category ISO-L-TCD)

GSO ISO 6743-4:2023 润滑油、工业用油及相关产品（L 级） 分类 第4部分：H 系列（液压系统）

ISO 6743-4:2015 establishes the detailed classification of fluids of Family H (Hydraulic systems) which belong to class L (Lubricants, industrial oils, and related products). It is intended to be read in conjunction with ISO 6743‑99. This classification system does not include automotive brake fluids or aircraft hydraulic fluids.

Lubricants, industrial oils and related products (class L) — Classification — Part 4: Family H (Hydraulic systems)

ISO 11158:2023 润滑油、工业用油及相关产品（L 级） — H 系列（液压系统） — HH、HL、HM、HV 和 HG 类别规范

Lubricants, industrial oils and related products (class L) — Family H (hydraulic systems) — Specifications for categories HH, HL, HM, HV and HG

ASTM D7646-23 用冷却曲线分析法测定铝合金用含水聚合物淬火剂冷却特性的标准试验方法

Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys by Cooling Curve Analysis

23/30459430 DC BS ISO 7745 液压流体动力 耐火 (FR) 液体 使用要求和指南

BS ISO 7745. Hydraulic fluid power. Fire-resistant (FR) fluids. Requirements and guidelines for use

GSO ISO 4406:2023 液压流体动力 流体 固体颗粒污染程度编码方法

This document specifies the code to be used in defining the quantity of solid particles in the fluid used in a given hydraulic fluid power system.

Hydraulic fluid power — Fluids — Method for coding the level of contamination by solid particles

ISO/DIS 7745 液压流体动力“耐火（FR）流体”使用要求和指南

Hydraulic fluid power — Fire-resistant (FR) fluids — Requirements and guidelines for use

ISO/DIS 11158 润滑油、工业用油和相关产品（L 类）“H 系列（液压系统）”HH、HL、HM、HV 和 HG 类的规范

Lubricants, industrial oils and related products (class L) — Family H (hydraulic systems) — Specifications for categories HH, HL, HM, HV and HG

23/30459433 DC BS ISO 11158 润滑油、工业油及相关产品（L 级） H 系列（液压系统） HH、HL、HM、HV 和 HG 类别的规格

BS ISO 11158. Lubricants, industrial oils and related products (class L). Family H (hydraulic systems). Specifications for categories HH, HL, HM, HV and HG

KS B ISO 7745-2022 液压流体动力 耐火（FR）流体 使用指南

Hydraulic fluid power－Fire－resistant(FR) fluids－Guidelines for use

ASTM D7721-22 确定流体选择对液压系统或部件效率的影响的标准实践

1.1 This practice covers all types and grades of hydraulic fluids. 1.2 This practice is applicable to both laboratory and field evaluations. 1.3 This practice provides guidelines for conducting hydraulic fluid evaluations. It does not prescribe a specific efficiency test methodology. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Determining the Effect of Fluid Selection on Hydraulic System or Component Efficiency

T/SZBX 076-2022 机动车辆制动液

本文件规定了用于机动车辆液压制动和液压离合系统的非石油基型制动液的要求和试验方法、检验规则及标志、包装、运输和贮存。

Motor vehicle brake fluids

GSO ISO 12922:2022 润滑油、工业油和相关产品（L 级） H 系列（液压系统） HFAE、HFAS、HFB、HFC、HFDR 和 HFDU 类别液压油规范

This document specifies the minimum requirements of unused fire-resistant and less flammable hydraulic fluids for hydrostatic and hydrodynamic systems in general industrial applications. It is not intended for use in aerospace or power-generation applications, where different requirements apply. It provides guidance for suppliers and end users of these less hazardous fluids and to the manufacturers of hydraulic equipment in which they are used. Of the categories covered by ISO 6743-4, which classifies the different types of fluids used in hydraulic applications, only the following are detailed in this document: HFAE, HFAS, HFB, HFC, HFDR and HFDU. Types HFAE, HFAS, HFB, HFC and HFDR are "fire-resistant" fluids as defined by ISO 5598. Most HFDU fluids, while displaying an improvement in combustion behaviour over mineral oil, fall outside this definition and are more appropriately considered as "less flammable" fluids.

Lubricants, industrial oils and related products (class L) — Family H (hydraulic systems) — Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU

GSO ISO 11365:2022 石油及相关产品 三芳基磷酸酯汽轮机控制液维护要求和指南

ISO 11365:2017 is applicable to the use of triaryl phosphate esters as fire-resistant fluids for turbine control and other hydraulic systems in power generation. These fluids fall under category HFDR of ISO 6743‑4[1]. ISO 11365:2017 is intended to: - assist the power equipment operator to maintain the fluid in a condition that will ensure the safe and reliable operation of the turbine while maximizing fluid life; - recommend procedures for examining consignments of new fluid and monitoring the fluid in use; - provide information on the safe handling, storage and disposal of the fluid; - offer background information on the causes of fluid degradation.

Petroleum and related products — Requirements and guidance for the maintenance of triaryl phosphate ester turbine control fluids

ASTM D6351-22 测定液压流体低温流动性和外观的标准试验方法

1.1 This test method covers the fluidity and appearance of hydraulic fluids after storage at low temperature. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.2.1 Exception—In 6.1.1, the material is designated in cSt as this is the common name used for this type of oil. 1.3 WARNING—Mercury has been designated by many regulatory agencies as a hazardous substance that can cause serious medical issues. Mercury, or its vapor, has been demonstrated to be hazardous to health and corrosive to materials. Use caution when handling mercury and mercury-containing products. See the applicable product Safety Data Sheet (SDS) for additional information. The potential exists that selling mercury or mercury-containing products, or both, is prohibited by local or national law. Users must determine legality of sales in their location. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific warning statements, see 1.3 and Section 6. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Determination of Low Temperature Fluidity and Appearance of Hydraulic Fluids

KS M ISO 11158-2021 润滑油、工业用油及相关产品（L级） H系列（液压系统） HH、HL、HM、HR、HV和HG类别规范

Lubricants, industrial oils and related products(class L) — Family H (hydraulic systems) — Specifications for categories HH, HL, HM, HR, HV, and HG,

ASTM D7043-21 指示定容叶片泵中非石油和石油液压流体磨损特性的标准试验方法

1.1 This test method covers a constant volume vane pump test procedure operated at 1200 r ⁄min and 13.8 MPa. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.2.1 Exception—There are no SI equivalents for the inch fasteners and inch O-rings that are used in the apparatus in this test method. 1.2.2 Exception—In some cases English pressure values are given in parentheses as a safety measure. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Indicating Wear Characteristics of Non-Petroleum and Petroleum Hydraulic Fluids in a Constant Volume Vane Pump

ASTM D6482-21 通过搅拌冷却曲线分析测定水性聚合物淬火剂冷却特性的标准试验方法（Tensi法）

1.1 This test method covers the equipment and the procedure for evaluation of quenching characteristics of a quenching fluid by cooling rate determination. 1.2 This test method is designed to evaluate quenching fluids with agitation, using the Tensi agitation apparatus. 1.3 The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)

ASTM D3700-21 使用浮动活塞气缸获取液化石油气样品的标准实施规程

1.1 This practice covers the equipment and procedures for obtaining a representative sample of liquefied petroleum gas (LPG), such as specified in ASTM Specification D1835, GPA 2140, and comparable international standards. It may also be used for other natural gas liquid (NGL) products that are normally single phase (for example, NGL mix, field butane, and so forth), defined in other industry specifications or contractual agreements, and for volatile (higher vapor pressure) crude oils. NOTE 1—Some floating piston cylinders have such tight piston seals that the vapor pressure of some high vapor pressure crude oils may not be sufficient to allow sampling without a handle to move the piston. An alternative sampling practice for UN Class 3 liquids (under 300 kPa at 52 °C) is Practice D8009, which utilizes a Manual Piston Cylinder (MPC) sampler. 1.2 This practice is not intended for non-specification products that contain significant quantities of undissolved gases (N2, CO2), free water or other separated phases, such as raw or unprocessed gas/liquids mixtures and related materials. The same equipment can be used for these purposes, but additional precautions are generally needed to obtain representative samples of multi-phase products (see Appendix X1). 1.3 This practice includes recommendations for the location of a sample point in a line or vessel. It is the responsibility of the user to ensure that the sampling point is located so as to obtain a representative sample. 1.4 The values stated in SI units are to be regarded as standard. 1.4.1 Exception—The values given in parentheses are for information only. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices, and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder

ASTM D4998-13(2021) 评定拖拉机液压油磨损特性的标准试验方法

1.1 This test method is used to screen lubricants for gear wear. It is primarily applicable to tractor hydraulic fluids but may be suitable for other applications. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific warning information is given in Sections 7 and 9. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Evaluating Wear Characteristics of Tractor Hydraulic Fluids