75.160.30 气体燃料 标准查询与下载
共找到 432 条与 气体燃料 相关的标准，共 29 页
本标准规定了城市燃气的分类原则、指标计算方法和指标要求，安全性指标和互换性指标。 本标准适用于供城镇作燃料使用的各种燃气的分类。
Classification of town gas
- ICS
- 75.160.30
- CCS
- P45
- 发布
- 1992-08-15
- 实施
- 1993-05-01
本标准规定了由人工制气厂生产的人工煤气的技术条件。 本标准适用于以煤或油为原料的人工煤气经城镇燃气管网输送至用户，作为居民生活、工业企业生产和公共建筑用气的城镇燃气。
Manufactured gas
- ICS
- 75.160.30
- CCS
- P45
- 发布
- 1992-08-15
- 实施
- 1993-05-01
本标准规定了测定液化石油气挥发性的方法。 本标准适用于丙烷型、丙-丁烷混合型和丁烷型液化石油气。 本标准指的挥发性是用试样被汽化95％（V/V）时的温度来表示，低挥发性的烃类化合物的存在意味着这个温度将会升高。本标准的试验结果可用来预测各种类型液化石油气中较高沸点组分的大致含量。 注意：液化石油气极易挥发、燃烧，操作时要注意有关安全问题。
Liquefied petroleum gases.Determination of volatility
- ICS
- 75.160.30
- CCS
- E46
- 发布
- 1991-12-09
- 实施
- 1992-10-01
本标准规定了用无火焰原子吸收光谱仪测定液体燃料油中钒含量的方法。 本标准适用于测定钒含量为0.4～4.0mg/kg的船用燃料油和重质燃料油等。 注：试样经适当处理，也适用于测定钒含量小于0.4mg/kg或大于4.0mg/kg的液体燃料油（见附录A）。
Liquid fuel oils--Determination of vanadium content--Flameless atomic absorption spectroscopic method
- ICS
- 75.160.30
- CCS
- E30
- 发布
- 1990-12-14
- 实施
- 1991-10-01
本标准规定了用颜色指示剂法测定喷气燃料总酸值。 本标准适用于总酸值范围为0.000～0.100mgKOH/g的喷气燃料。
Jet fuels--Determination of total acid number
- ICS
- 75.160.30
- CCS
- E30
- 发布
- 1990-12-14
- 实施
- 1991-10-01
本标准规定了城市燃气中硫化氢含量的碘滴定测量法。 本标准适用于硫化氢含量在10mg/m以上的人工煤气和天然气，为城市燃气中硫化氢测量的仲裁方法。
Determination of hydrogen sulfide of gas in urban area
- ICS
- 75.160.30
- CCS
- P45
- 发布
- 1990-01-04
- 实施
- 1990-09-01
本篇规定了城市燃气中氨含量的中和滴定测量法。 本篇适用于氨含量在10mg/m以上的城市燃气。
Determination of ammonia of gas in urban area
- ICS
- 75.160.30
- CCS
- P45
- 发布
- 1990-01-04
- 实施
- 1990-09-01
本标准规定了城市燃气中萘含量的气相色谱分析测定方法。 本标准适用于萘含量在5mg/m以上的城市燃气。
Determination of naphthalene of gas in urban area--Gas chromatographic method
- ICS
- 75.160.30
- CCS
- P45
- 发布
- 1990-01-04
- 实施
- 1990-09-01
本标准适用于液化石油气C以下气态烃类组分的分析，不包括炔烃。
Analysis of liquefied petroleum gas composition by gas chromatography
- ICS
- 75.160.30
- CCS
- P45
- 发布
- 1989-02-22
- 实施
- 1989-11-01
本标准适用于人工煤气中氢、氧、氮、一氧化碳、二氧化碳、甲烷、乙烯、乙烷、丙烯、丙烷等主要组成的测定。
Analysis of manufactured gas composition by gas chromatography
- ICS
- 75.160.30
- CCS
- P45
- 发布
- 1989-02-22
- 实施
- 1989-11-01
本方法适用于评定喷气燃料在模拟发动机燃油系统工作条件下，产生分解沉积物的倾向。
Jet fuels--Determination of thermal oxidation stability--JFTOT method
- ICS
- 75.160.30
- CCS
- E31
- 发布
- 1988-04-29
- 实施
- 1989-04-01
本标准适用于天然原油加工制得的喷气燃料。本产品是按国家规定之鉴定程序通过的试样所采用的原料和生产工艺进行生产的。其代号为RP＝1.
Jet fuel No.1
- ICS
- 75.160.30
- CCS
- E31
- 发布
- 1977-09-12
- 实施
- 1977-12-01
Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density of Gaseous Fuels
- ICS
- 75.160.30
- CCS
- 发布
- 2024-05-01
- 实施
Technical Specifications for Coal-to-Methanol Coupled Green Hydrogen Carbon Emission Reduction
- ICS
- 75.160.30
- CCS
- G 17
- 发布
- 2024-02-02
- 实施
- 2024-03-02
本文件规定了煤层气去除杂质技术规范的术语和定义、煤层气形成和杂质危害、除杂要求、技术流程、设备清理、检修和维护、事故处理和安全管理。 本文件适用于煤层气去除杂质技术的推广和应用, 净化后的煤层气可以用作民用燃料、工业燃料、发电燃料、汽车燃料和重要的化工原料，用途非常广泛。
Technical specifications for impurity removal from coal bed methane
- ICS
- 75.160.30
- CCS
- D451
- 发布
- 2023-12-08
- 实施
- 2023-12-23
Standard Specification for Methane Thermophysical Property Tables
- ICS
- 75.160.30
- CCS
- 发布
- 2023-11-01
- 实施
Describes a procedure for the assessment of whether liquefied petroleum gas hydrocarbons consisting predominantly of propane and/or propene are sufficiently dry to avoid malfunctions in pressure-reducing systems installed in domestic and industrial applications.
Liquefied petroleum gases — Assessment of the dryness of propane — Valve freeze method
- ICS
- 75.160.30
- CCS
- 发布
- 2023-09-10
- 实施
1.1 This test method covers the determination, by gas chromatography, of soluble hydrocarbon materials, sometimes called “oily residue,” which can be present in Liquefied Petroleum (LP) Gases and which are substantially less volatile than the LPG product. 1.2 This test method quantifies, in the range of 10 to 600 mg/kg (ppm mass), the residue with a boiling point between 174°C and 522°C (C10 to C40) in LPG. Higher boiling materials, or materials that adhere permanently to the chromatographic column, will not be detected. 1.3 Units—The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use
Standard Test Method for Residues in Liquefied Petroleum (LP) Gases by Gas Chromatography with Liquid, On-Column Injection
- ICS
- 75.160.30
- CCS
- 发布
- 2023-09-10
- 实施
This International Standard describes a simplified method for the calculation of density and vapour pressure of liquefied petroleum gases (LPG) based on compositional data and density and vapour pressure factors for individual LPG components. A list of factors is provided in this International Standard. This method is intended for application in specifications of product quality and is not intended for application to quantity measurement in custody transfer (see ISO 6578).
Liquefied petroleum gases — Calculation method for density and vapour pressure
- ICS
- 75.160.30
- CCS
- 发布
- 2023-09-10
- 实施
Scope is not provided for this standard
Standard Test Method for Carbon Dioxide in Natural Gas Using Length-of-Stain Detector Tubes
- ICS
- 75.160.30
- CCS
- 发布
- 2023-09-10
- 实施
