75.180.20 加工设备 标准查询与下载

12/30210113 DC BS EN ISO 28300 石油、石化和天然气工业 常压和低压储罐的通风

BS EN ISO 28300. Petroleum, petrochemical and natural gas industries. Venting of atmospheric and low-pressure storage tanks

GOST R 54961-2012 配气系统.消费者气体网络.通用操作要求.操作文档

Gas distribution systems. Consumers gas networks. General requirements to operation. Operational documentation

EN ISO 13705:2012 石油,石化和天然气工业.解雇加热器一般炼油厂服务

This International Standard specifies requirements and gives recommendations for the design, materials,fabrication, inspection, testing, preparation for shipment, and erection of fired heaters, air heaters (APHs), fans and burners for general refinery service. This International Standard is not intended to apply to the design of steam reformers or pyrolysis furnaces.

Petroleum, petrochemical and natural gas industries - Fired heaters for general refinery service

GOST R 54983-2012 气体分布系统.液化石油气物品.通用操作要求.操作文档

Gas distribution systems. Natural gas distribution networks. General requirements for operation. Operational documentation

DIN EN ISO 28300 Berichtigung 1:2011 石油,石化和天然气工业.常压和低压存储罐的通风(ISO 28300-2008).德文版本EN ISO 28300-2008, DIN EN ISO 28300-2008-11的勘误表.德文版本EN ISO 28300-2008/AC-2009

Petroleum, petrochemical and natural gas industries - Venting of atmospheric and low-pressure storage tanks (ISO 28300:2008); German version EN ISO 28300:2008, Corrigendum to DIN EN ISO 28300:2008-11; German version EN ISO 28300:2008/AC:2009

DS/CEN ISO/TS 24817:2011 石油、石化和天然气工业 管道复合材料修复 鉴定和设计、安装、测试和检验

ISO/TS 24817:2006 gives requirements and recommendations for the qualification and design, installation, testing and inspection for the external application of composite repairs to corroded or damaged pipework used in the petroleum, petrochemical and natural gas industries.

Petroleum, petrochemical and natural gas industries - Composite repairs for pipework - Qualification and design, installation, testing and inspection

EN ISO/TS 24817:2011 石油,石化和天然气工业复合材料修理管道的资格,设计,安装,测试和检验

Petroleum, petrochemical and natural gas industries - Composite repairs for pipework - Qualification and design, installation, testing and inspection

GOST R 54802-2011 石油和天然气工业.包装用往复式气体压缩机.技术要求

Petroleum and natural gas industries. Packaged reciprocating gas compressor. Technical requirements

NF M87-209/A1:2010 石油、石化和天然气工业.压力释放和降压系统.修改件1

Petroleum, petrochemical and natural gas industries - Pressure-relieving and depressuring systems - Amendment 1.

DIN EN ISO 10438-4:2010 石油、石化和天然气工业 润滑、油封和控油设备和辅助装置 第4部分 自动气封支撑设备(ISO 10438-4-2007) 英文版本EN ISO 10438-4-2007,带光盘

Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 4: Self-acting gas seal support systems (ISO 10438-4:2007); English version EN ISO 10438-4:2007, with CD-ROM

DIN EN ISO 10438-1:2010 石油、石化和天然气工业.润滑、油封和控油设备和辅助装置.第1部分:一般要求(ISO 10438-1-2007).英文版本EN ISO 10438-1-2007,带光盘

Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 1: General requirements (ISO 10438-1:2007); English version EN ISO 10438-1:2007, with CD-ROM

DIN EN ISO 10438-3:2010 石油、石化和天然气工业.润滑、油封和控油设备和辅助装置.第3部分:通用石油系统(ISO 10438-3-2007).英文版本EN ISO 10438-3-2007,带光盘

Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 3: General-purpose oil systems (ISO 10438-3:2007); English version EN ISO 10438-3:2007, with CD-ROM

DIN EN ISO 10438-2:2010 石油、石化和天然气工业.润滑、油封和控油设备和辅助装置.第2部分:专用石油系统(ISO 10438-2-2007).英文版本EN ISO 10438-2-2007,带光盘

Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 2: Special-purpose oil systems (ISO 10438-2:2007); English version EN ISO 10438-2:2007, with CD-ROM

GSO ISO/TS 24817:2010 石油、石化和天然气工业 管道复合修复 检查、效率测试、设计和安装

This Technical Specification gives requirements and recommendations for the qualification and design, installation, testing and inspection for the external application of composite repairs to corroded or damaged pipework used in the petroleum, petrochemical and natural gas industries.

Petroleum, petrochemical and natural gas industries - Composite repairs for pipework - Qualification and design, installation, testing and inspection

LST EN ISO 28300:2008/AC:2009 石油、石化和天然气工业 常压和低压储罐的通风（ISO 28300:2008/Cor 1:2009）

Petroleum, petrochemical and natural gas industries - Venting of atmospheric and low-pressure storage tanks (ISO 28300:2008/Cor 1:2009)

NF M87-230-4*NF EN ISO 10438-4:2009 石油、石油化学和天然气工业.润滑、油封、控油系统及辅助装置.第4部分:自动气封支撑系统

Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 4 : self-acting gas seal support systems.

EN ISO 28300:2008/AC:2009 石油,石化和天然气工业.环境通风和低压储存罐 包含修改件AC,2009

Petroleum, petrochemical and natural gas industries - Venting of atmospheric and low-pressure storage tanks (ISO 28300:2008/Cor 1:2009)

GSO ISO 10438-1:2009 石油、石化和天然气工业 传动轴润滑 第1部分：一般要求

This part of ISO 10438 specifies general requirements for lubrication systems, oil-type shaft-sealing systems, dry-gas face-type shaft-sealing systems and control-oil systems for general- or special-purpose applications. General-purpose applications are limited to lubrication systems. These systems can serve equipment such as compressors, gears, pumps and drivers. This part of ISO 10438 is intended to be used in conjunction with ISO 10438-2, ISO 10438-3 or ISO 10438-4, as appropriate.

Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 1: General requirements

GSO ISO 14691:2009 石油、石化和天然气工业 机械动力传输用弹性联轴器 一般用途

This International Standard specifies the requirements for couplings for the transmission of power between the rotating shafts of two machines for general-purpose applications in the petroleum, petrochemical and natural gas industries. Such applications typically require couplings to transmit power at speeds not exceeding 4 000 r/min, between machines in which the first lateral critical speed is above the running speed range (stiffshaft machines). It can, by agreement, be used for applications outside these limits. NOTE 1 Recommendations are included in the Introduction as to when the use of ISO 10441 should be considered. This International Standard is applicable to couplings designed to accommodate parallel (or lateral) offset, angular misalignment and axial displacement of the shafts without imposing excessive mechanical loading on the coupled machines. Couplings covered by this International Standard include gear (and other mechanical contact types), metallic flexible-element and various elastomeric types. Such couplings can be of all metal construction or can include components of non-metallic materials, such as composites. This International Standard covers design, materials of construction, inspection and testing of couplings and methods of attachment of the coupling to the shafts (including tapered sleeve and other proprietary devices). This International Standard does not apply to special types of couplings, such as clutch, hydraulic, eddycurrent, rigid and radial-spline types. This International Standard does not define criteria for the selection of coupling types for specific applications. NOTE 2 In many cases, couplings covered by this International Standard are manufacturers' catalogue items.

Petroleum, petrochemical and natural gas industries – Flexible couplings for mechanical power transmission – General-purpose applications

GSO ISO 28300:2009 石油、石化和天然气工业 常压和低压储罐通风

This International Standard covers the normal and emergency vapour venting requirements for aboveground liquid petroleum or petroleum products storage tanks and aboveground and underground refrigerated storage tanks designed as atmospheric storage tanks or low-pressure storage tanks. Discussed in this International Standard are the causes of overpressure and vacuum; determination of venting requirements; means of venting; selection, and installation of venting devices; and testing and marking of relief devices. This International Standard is intended for tanks containing petroleum and petroleum products but it can also be applied to tanks containing other liquids; however, it is necessary to use sound engineering analysis and judgment whenever this International Standard is applied to other liquids. This International Standard does not apply to external floating-roof tanks.

Petroleum, petrochemical and natural gas industries – Venting of atmospheric and low-pressure storage tanks