75.180.20 加工设备 标准查询与下载
共找到 272 条与 加工设备 相关的标准，共 19 页
This part of ISO 10438, in conjunction with of ISO 10438-1, specifies requirements for oil systems for specialpurpose applications. These oil systems can provide lubrication oil, seal oil or both. These systems can serve equipment such as compressors, gears, pumps and drivers. NOTE The term “special-purpose application” is defined in ISO 10438-1.
Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 2: Special-purpose oil systems
- ICS
- 75.180.20
- CCS
- 发布
- 2009-10-17
- 实施
This International Standard covers the normal and emergency vapour venting requirements for aboveground liquid petroleum or petroleum products storage tanks and aboveground and underground refrigerated storage tanks designed as atmospheric storage tanks or low-pressure storage tanks. Discussed in this International Standard are the causes of overpressure and vacuum; determination of venting requirements; means of venting; selection, and installation of venting devices; and testing and marking of relief devices. This International Standard is intended for tanks containing petroleum and petroleum products but it can also be applied to tanks containing other liquids; however, it is necessary to use sound engineering analysis and judgment whenever this International Standard is applied to other liquids. This International Standard does not apply to external floating-roof tanks.
Petroleum, petrochemical and natural gas industries – Venting of atmospheric and low-pressure storage tanks
- ICS
- 75.180.20
- CCS
- 发布
- 2009-10-17
- 实施
This part of ISO 10438 specifies general requirements for lubrication systems, oil-type shaft-sealing systems, dry-gas face-type shaft-sealing systems and control-oil systems for general- or special-purpose applications. General-purpose applications are limited to lubrication systems. These systems can serve equipment such as compressors, gears, pumps and drivers. This part of ISO 10438 is intended to be used in conjunction with ISO 10438-2, ISO 10438-3 or ISO 10438-4, as appropriate.
Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 1: General requirements
- ICS
- 75.180.20
- CCS
- 发布
- 2009-10-17
- 实施
This part of ISO 10438, in conjunction with ISO 10438-1, specifies requirements for oil systems for generalpurpose applications. These oil systems can provide lubrication oil, but not seal oil and can serve equipment such as compressors, gears, pumps and drivers. NOTE The term “general-purpose” is defined in ISO 10438-1.
Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 3: General-purpose oil systems
- ICS
- 75.180.20
- CCS
- 发布
- 2009-10-17
- 实施
Petroleum, petrochemical and natural gas industries - Venting of atmospheric and low-pressure storage tanks; Technical Corrigendum 1
- ICS
- 75.180.20
- CCS
- G93
- 发布
- 2009-10
- 实施
Petroleum, petrochemical and natural gas industries - Calculation of heater-tube thickness in petroleum refineries (ISO 13704:2007/Cor 1:2008)
- ICS
- 75.180.20
- CCS
- 发布
- 2009-06-19
- 实施
- 2009-06-19
This International Standard specifies the requirements and gives recommendations for the procedures and design criteria used for calculating the required wall thickness of new tubes and associated component fittings for petroleum-refinery heaters. These procedures are appropriate for designing tubes for service in both corrosive and non-corrosive applications. These procedures have been developed specifically for the design of refinery and related process-fired heater tubes (direct-fired, heat-absorbing tubes within enclosures). These procedures are not intended to be used for the design of external piping.This International Standard does not give recommend
Petroleum, petrochemical and natural gas industries - Calculation of heater-tube thickness in petroleum refineries
- ICS
- 75.180.20
- CCS
- 发布
- 2009-06-15
- 实施
- 2009-06-15
This International Standard specifies requirements and provides guidance for the selection, design, specification, operation and maintenance of flares and related combustion and mechanical components used in pressure-relieving and vapour-depressurizing systems for petroleum, petrochemical and natural gas industries. Although this International Standard is primarily intended for new flares and related equipment, it is also possible to use it to evaluate existing flare facilities. Annexes A, B and C provide further guidance and best practices for the selection, specification and mechanical details for flares and on the design, operation and maintenance of flare combustion and related equipment. Annex D explains how to use the data sheets provided in Annex E; it is intended that these data sheets be used to communicate and record design information.
Petroleum, petrochemical and natural gas industries - Flare details for general refinery and petrochemical service (ISO 25457:2008); English version EN ISO 25457:2008
- ICS
- 75.180.20
- CCS
- C80
- 发布
- 2009-06
- 实施
Petroleum, petrochemical and natural gas industries - Flexible couplings for mechanical power transmission - General-purpose applications (ISO 14691:2008)
- ICS
- 75.180.20
- CCS
- 发布
- 2009-03-31
- 实施
- 2009-03-31
Petroleum, petrochemical and natural gas industries - Flare details for general refinery and petrochemical service (ISO 25457:2008)
- ICS
- 75.180.20
- CCS
- 发布
- 2009-03-31
- 实施
- 2009-03-31
Petroleum, petrochemical and natural gas industries - Flexible couplings for mechanical power transmission - General purpose applications
- ICS
- 75.180.20
- CCS
- E90
- 发布
- 2009-02-28
- 实施
- 2009-02-28
Petroleum, petrochemical and natural gas industries. Flexible couplings for mechanical power transmission. General purpose applications
- ICS
- 75.180.20
- CCS
- 发布
- 2009-02-28
- 实施
- 2009-02-28
Petroleum, petrochemical and natural gas industries. Flare details for general refinery and petrochemical service
- ICS
- 75.180.20
- CCS
- 发布
- 2009-02-28
- 实施
- 2009-02-28
Petroleum, petrochemical and natural gas industries - Flare details for general refinery and petrochemical service
- ICS
- 75.180.20
- CCS
- E04
- 发布
- 2009-02-28
- 实施
- 2009-02-28
This Standard is applicable to flares used in pressure relieving and vapor-depressuring systems used in general refinery and petrochemical services.The information provided is intended to aid in the design and selection of a flare system that is most appropriate for the risks and circumstances.Although this Standard is primarily intended for new flares and facilities, itmay be used as a guideline in the evaluation of existing facilities together with appropriate cost and risk assessment considerations.This Standard describes the mechanical design, operation and maintenance of three types of flares:a) Elevated Flares b) Multi-burner Staged Flares c) Enclosed
Petroleum, petrochemical and natural gas industries - Flare details for general refinery and petrochemical service
- ICS
- 75.180.20
- CCS
- 发布
- 2009-02-20
- 实施
- 2009-02-20
This International Standard specifies the requirements for couplings for the transmission of power between the rotating shafts of two machines for general-purpose applications in the petroleum, petrochemical and natural gas industries. Such applications typically require couplings to transmit power at speeds not exceeding 4 000 r/min, between machines in which the first lateral critical speed is above the running speed range (stiffshaft machines). It can, by agreement, be used for applications outside these limits.NOTE 1 Recommendations are included in the Introduction as to when the use of ISO 10441 should be considered.This International Standard is appli
Petroleum, petrochemical and natural gas industries - Flexible couplings for mechanical power transmission - General-purpose applications
- ICS
- 75.180.20
- CCS
- 发布
- 2009-02-09
- 实施
- 2009-02-09
Petroleum and natural gas industries. Reciprocating compressors. General technical requirements
- ICS
- 75.180.20
- CCS
- 发布
- 2009-01-01
- 实施
- 2011-01-01
Fired heaters for refineries. General technical requirements
- ICS
- 75.180.20
- CCS
- 发布
- 2009
- 实施
- 2011-01-01
Petroleum, petrochemical and natural gas industries - Flexible couplings for mechanical power transmission - General-purpose applications
- ICS
- 75.180.20
- CCS
- E90
- 发布
- 2008-12
- 实施
Petroleum, petrochemical and natural gas industries - Flare details for general refinery and petrochemical service
- ICS
- 75.180.20
- CCS
- G93
- 发布
- 2008-12
- 实施
