75.180.20 加工设备 标准查询与下载

LST EN ISO 28300:2008 石油、石化和天然气工业 常压和低压储罐的通风（ISO 28300:2008）

Petroleum, petrochemical and natural gas industries - Venting of atmospheric and low-pressure storage tanks (ISO 28300:2008)

LST EN ISO 23251:2007/A1:2008 石油、石化和天然气工业 泄压和减压系统 修正案 1（ISO 23251:2007/Amd 1:2008）

Petroleum, petrochemical and natural gas industries - Pressure-relieving and depressuring systems - Amendment 1 (ISO 23251:2007/Amd 1:2008)

GSO ISO 13710:2008 石油、石化和天然气工厂 往复式正排量泵

This International Standard specifies requirements for reciprocating positive-displacement pumps and pump units for use in the petroleum, petrochemical and natural gas industries. It is applicable to both direct-acting and power-frame types. This International Standard is not applicable to controlled-volume pumps and rotary pumps. NOTE For controlled-volume pumps see API Std 675; for rotary pumps see API Std 676.

Petroleum, petrochemical and natural gas industries - Reciprocating positive displacement pumps

DIN EN ISO 10440-1:2008 石油、石化和天然气工业.旋转型容积式压缩机.第1部分:加工压缩机

This part of ISO 10440 specifies requirements for dry and oil-flooded, helical-lobe rotary compressors (see Figure 1) used for vacuum or pressure or both in petroleum, petrochemical, and gas industry services. It is intended for compressors that are in special-purpose applications. It is not applicable to general-purpose air compressors, liquid-ring compressors, or vane-type compressors. NOTE Standard air compressors are covered in ISO 10440-2.

Petroleum, petrochemical and natural gas industries - Rotary-type positive-displacement compressors - Part 1: Process compressors (ISO 10440-1:2007); English version EN ISO 10440-1:2007

DS/EN ISO 23251/A1:2008 石油、石化和天然气工业 减压和减压系统 修正案 1

This European Standard is applicable to pressure-relieving and vapour-depressuring systems. Although intended for use primarily in oil refineries, it is also applicable to petrochemical facilities, gas plants, liquefied natural gas (LNG) facilities and oil and gas production facilities. The information provided is designed to aid in the selection of the system that is most appropriate for the risks and circumstances involved in various installations.

Petroleum, petrochemical and natural gas industries - Pressure-relieving and depressuring systems - Amendment 1

BS EN ISO 28300:2008 石油、石化和天然气工业.环境通风和低压储存罐

This International Standard covers the normal and emergency vapour venting requirements for aboveground liquid-petroleum or petroleum-products storage tanks and aboveground and underground refrigerated storage tanks designed for operation at pressures from full vacuum through 103,4 kPa (ga) [15 psig]. Discussed in this International Standard are the causes of overpressure and vacuum; determination of venting requirements; means of venting; selection, and installation of venting devices; and testing and marking of relief devices. This International Standard is intended for tanks containing petroleum and petroleum products but it can also be applied to tanks containing other liquids; however, it is necessary to use sound engineering analysis and judgment whenever this International Standard is applied to other liquids. This International Standard does not apply to external floating-roof tanks.

Petroleum, petrochemical and natural gas industries - Venting of atmospheric and low-pressure storage tanks

DS/EN ISO 23251/AC:2008 石油、石化和天然气工业 泄压和减压系统

This European Standard is applicable to pressure-relieving and vapour-depressuring systems. Although intended for use primarily in oil refineries, it is also applicable to petrochemical facilities, gas plants, liquefied natural gas (LNG) facilities and oil and gas production facilities. The information provided is designed to aid in the selection of the system that is most appropriate for the risks and circumstances involved in various installations.

Petroleum, petrochemical and natural gas industries - Pressure-relieving and depressuring systems

DIN EN ISO 10438-4:2008 石油、石化和天然气工业 润滑、油封和控油设备和辅助装置 第4部分 自动气封支撑设备

This part of ISO 10438 in conjunction with ISO 10438-1 specifies requirements for support systems for self-acting gas seals (dry gas seals), for example as described in ISO 10439 and ISO 10440-1. These systems can serve equipment such as compressors, gears, pumps and drivers. NOTE For the purposes of this statement of scope, APl 617 is equivalent to ISO 10439 and APl 619 is equivalent to ISO 10440-1.

Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 4: Self-acting gas seal support systems (ISO 10438-4:2007); English version EN ISO 10438-4:2007

DIN EN ISO 10438-3:2008 石油、石化和天然气工业.润滑、油封和控油设备和辅助装置.第3部分:通用油设备

This part of ISO 10438, in conjunction with ISO 10438-1, specifies requirements for oil systems for general- purpose applications. These oil systems can provide lubrication oil, but not seal oil and can serve equipment such as compressors, gears, pumps and drivers. NOTE The term "general-purpose' is defined in ISO 10438-1.

Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 3: General-purpose oil systems (ISO 10438-3:2007); English version EN ISO 10438-3:2007

DIN EN ISO 10438-1:2008 石油、石化和天然气工业.润滑、油封和控油设备和辅助装置.第1部分:一般要求

This part of ISO 10438 specifies general requirements for lubrication systems, oil-type shaft-sealing systems, dry-gas face-type shaft-sealing systems and control-oil systems for general- or special-purpose applications. General-purpose applications are limited to lubrication systems. These systems can serve equipment such as compressors, gears, pumps and drivers. This part of ISO 10438 is intended to be used in conjunction with ISO 10438-2, ISO 10438-3 or ISO 10438-4, as appropriate.

Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 1: General requirements (ISO 10438-1:2007); English version EN ISO 10438-1:2007

DIN EN ISO 10438-2:2008 石油、石化和天然气工业.润滑、油封和控油设备和辅助装置.第2部分:专用油设备

This part of ISO 10438, in conjunction with of ISO 10438-1, specifies requirements for oil systems for special- purpose applications. These oil systems can provide lubrication oil, seal oil or both. These systems can serve equipment such as compressors, gears, pumps and drivers. NOTE The term "special-purpose application" is defined in ISO 10438-1.

Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 2: Special-purpose oil systems (ISO 10438-2:2007); English version EN ISO 10438-2:2007

SY/T 0045-2008 原油电脱水设计规范

本标准规定了原油电脱水器的设计参数、原油电脱水器的系列与结构、原油电脱水器的工艺安装设计、原油电脱水器电力装置安装设计、破乳剂的选择与应用等方面的原则要求。 本标准适用于陆上原油电脱水新建、扩建与改建工程。

Design specification of crude oil electric dehydration

EN ISO 28300:2008 石油,石化和天然气工业.环境通风和低压储存罐

This International Standard covers the normal and emergency vapour venting requirements for aboveground liquid-petroleum or petroleum-products storage tanks and aboveground and underground refrigerated storage tanks designed for operation at pressures from full vacuum through 103,4 kPa (ga) [15 psig]. Discussed in this International Standard are the causes of overpressure and vacuum; determination of venting requirements; means of venting; selection, and installation of venting devices; and testing and marking of relief devices.

Petroleum, petrochemical and natural gas industries - Venting of atmospheric and low-pressure storage tanks

ISO 28300:2008 石油、石化和天然气工业.环境通风和低压储存罐

This International Standard covers the normal and emergency vapour venting requirements for aboveground liquid petroleum or petroleum products storage tanks and aboveground and underground refrigerated storage tanks designed as atmospheric storage tanks or Iow-pressure storage tanks. Discussed in this International Standard are the causes of overpressure and vacuum; determination of venting requirements; means of venting; selection, and installation of venting devices; and testing and marking of relief devices. This International Standard is intended for tanks containing petroleum and petroleum products but it can also be applied to tanks containing other liquids; however, it is necessary to use sound engineering analysis and judgment whenever this International Standard is applied to other liquids. This International Standard does not apply to external floating-roof tanks.

Petroleum, petrochemical and natural gas industries - Venting of atmospheric and low-pressure storage tanks

LST EN ISO 23251:2007/AC:2008 石油、石化和天然气工业 泄压和减压系统（ISO 23251:2006/Cor 1:2007）

Petroleum, petrochemical and natural gas industries - Pressure-relieving and depressuring systems (ISO 23251:2006/Cor 1:2007)

DS/EN/ISO 10440-1:2008 石油、石化和天然气工业 旋转式容积式压缩机 第1部分：过程压缩机

This part of EN ISO 10440 specifies requirements and gives recommendations for helical, spiral and straight lobe rotary compressors used for vacuum or pressure, or both, for use in the petroleum and natural gas industries.

Petroleum, petrochemical and natural gas industries - Rotary-type positive-displacement compressors - Part 1: Process compressors

ISO 23251:2006/Amd 1:2008 石油、石化和天然气工业.压力释放和降压系统.修改件1

This standard is Petroleum, petrochemical and natural gas industries - Pressure-relieving and depressuring systems; Amendment 1

Petroleum, petrochemical and natural gas industries - Pressure-relieving and depressuring systems; Amendment 1

DS/EN ISO 10438-4:2008 石油、石化和天然气工业 润滑、轴封和控制油系统和辅助设备 第4部分：自作用气封支撑系统

This part of ISO 10438 in conjunction with ISO 10438-1 specifies requirements for support systems forself-acting gas seals (dry gas seals), for example as described in ISO 10439 and ISO 10440-1. Thesesystems can serve equipment such as compressors, gears, pumps and drivers.NOTE For the purposes of this statement of scope, API 617 is equivalent to ISO 10439 and API 619 is equivalent to ISO 10440-1.

Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 4: Self-acting gas seal support systems

DS/EN ISO 10438-3:2008 石油、石化和天然气工业 润滑、轴封和控制油系统和辅助设备 第3部分：通用油系统

This part of ISO 10438, in conjunction with ISO 10438-1, specifies requirements for oil systems for generalpurpose applications. These oil systems can provide lubrication oil, but not seal oil and can serve equipment such as compressors, gears, pumps and drivers.NOTE The term “general-purpose” is defined in ISO 10438-1.

Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 3: General-purpose oil systems

DS/EN ISO 10438-2:2008 石油、石化和天然气工业 润滑、轴封和控制油系统和辅助设备 第2部分：专用油系统

This part of ISO 10438, in conjunction with of ISO 10438-1, specifies requirements for oil systems for specialpurpose applications. These oil systems can provide lubrication oil, seal oil or both. These systems can serve equipment such as compressors, gears, pumps and drivers.NOTE The term “special-purpose application” is defined in ISO 10438-1.

Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 2: Special-purpose oil systems