77.040.01 金属材料试验综合 标准查询与下载



共找到 197 条与 金属材料试验综合 相关的标准,共 14

本文件描述了压水堆用燃料包壳管在高温高压水中切向微动磨损试验系统和设备、试样制备和夹具加工、条件和步骤、结果分析和数据处理等内容。

Test method for tangential fretting wear of fuel cladding in high temperature pressurized water of pressurized water reactor

ICS
77.040.01
CCS
D441
发布
2022-12-16
实施
2023-04-01

本文件描述了核电厂蒸汽发生器传热管表面划伤的微观组织结构表征和应力腐蚀试验测试方法,包含试样制备、分析表征方法、腐蚀试验及分析方法等。

Test method for stress corrosion cracking sensitivity of heat exchanger tube with surface scratch in steam generator of nuclear power plants

ICS
77.040.01
CCS
D441
发布
2022-12-16
实施
2023-04-01

本文件规定了在室温和高温状态下,钢板拉伸试验原位图像采集的的方法,包含仪器设备、样品、试验步骤、原位试验数据、试验报告等。 本文件适用于指导钢板(0.1mm~10mm)拉伸试验原位图像采集参数的确认。

Tensile testing for steel sheet and plate - In-situ image collecting

ICS
77.040.01
CCS
C361
发布
2022-11-30
实施
2022-11-30

Method for evaluation of hydrogen delayed fracture resistance of high strength steels for bolts

ICS
77.040.01
CCS
发布
20220816
实施
20220816

Method of determining the PCT relations of hydrogen-absorbing alloys

ICS
77.040.01
CCS
发布
20220816
实施
20220816

本文件规定了用电感耦合等离子体质谱仪(ICP-MS)测定多晶硅生产用氢气中钠、镁、铝、钙、铬、锰、铁、镍、铜、锌、砷、钛元素含量的方法。

Determination of metal impurity content in hydrogen for polysilicon production by inductively coupled plasma mass spectrometry

ICS
77.040.01
CCS
C321
发布
2022-02-28
实施
2022-08-01

本文件规定了金属材料高温维氏硬度试验的原理、符号及说明、试验设备、试样、试验程序及试验报告。  本文件适用于金属材料高温维氏硬度试验方法。

Metallic materials—High temperature Vickers hardness test method

ICS
77.040.01
CCS
M745
发布
2021-10-26
实施
2021-11-01

本文件规定了金属材料在电解质溶液中电化学腐蚀与磨料磨损作用共同存在下术语和定义、一般原则、材料、试验介质、试验设备、试验方法和试验报告等。 本文件适用于测试分析矿山、水利、石油、化工、海工等行业中遭受腐蚀磨损损伤的金属材料。金属材料在其它非电解质溶液中的腐蚀磨损交互作用试验方法可参照本文件。

Test method for synergistic effect of electrochemical corrosion-abrasive wear of metallic materials

ICS
77.040.01
CCS
M732
发布
2021-10-26
实施
2021-11-01

本文件规定了金属材料高温洛氏硬度的原理、符号及说明、试验设备、试样、试验方法及试验报告等。 本文件适用于金属材料的高温洛氏硬度试验。

Metallic materials—High temperature Rockwell hardness test method

ICS
77.040.01
CCS
M745
发布
2021-10-26
实施
2021-11-01

1.1 This specification covers the requirements for material certifications, specifically including materials under the jurisdiction of Committee E29, as well as defining terminology related thereto. 1.2 The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Certification of Metallic Materials

ICS
77.040.01
CCS
发布
2021-09-01
实施

本文件规定了核电厂用金属材料在高温高压水条件下利用声发射监测环境促进开裂的试验方法和 相关技术要求。

Test method for acoustic emission monitoring of environmentally assisted cracking in high temperature pressurized water for metallic materials used in nuclear power plants

ICS
77.040.01
CCS
D441
发布
2021-07-26
实施
2022-07-01

本文件规定了核电厂用316H奥氏体不锈钢构筑坯制造的前期准备、工艺程序、质量检查和质量保证。

Additive forging technique applied to austenitic stainless steel used in nuclear power plant - part 2: Slab assembling and seam welding

ICS
77.040.01
CCS
D441
发布
2021-07-26
实施
2022-06-30

本文件规定了核电厂用金属材料在高温高压水中金属离子溶出速率测量的试验方法。

Test method for metallic ion dissolution rate in high temperature pressurized water of metallic materials used in nuclear power plants

ICS
77.040.01
CCS
D441
发布
2021-07-26
实施
2022-06-30

本文件规定了核电厂用金属材料在高温高压水条件下应力腐蚀裂纹萌生测试试验方法和相关技术要求。

Test method for stress corrosion crack initiation in high temperature pressurized water of metallic materials used in nuclear power plants

ICS
77.040.01
CCS
D441
发布
2021-07-26
实施
2022-06-30

本文件规定了压水堆核电厂反应堆压力容器顶盖贯穿件J坡口密封焊缝模拟件的残余应力检测方法,包含残余应力的测量要求、测量设备、测量步骤和试验报告等。

Determination of residual stress in J-groove weld mockup of RPV head penetration

ICS
77.040.01
CCS
D441
发布
2021-07-26
实施
2022-07-01

本文件规定了核电金属构筑成形工艺用316H 奥氏体不锈钢连铸板坯的技术要求、试验方法、检验 规则、标志、运输、贮存和质量证明书。

Additive forging technique applied to austenitic stainless steel used in nuclear power plant - part 1: Continuous casting slabs

ICS
77.040.01
CCS
D441
发布
2021-07-26
实施
2022-06-30

本文件规定了核电厂用20MnNiMo合金钢构筑坯制造的前期准备、工艺程序、质量检查和质量保证。

Addictive forging technique applied to alloy steel used in nuclear power plant - part 2:slab assembling and seam welding

ICS
77.040.01
CCS
D441
发布
2021-07-26
实施
2022-06-30

本文件规定了采用慢应变速率测试进行核电厂用金属材料在高温高压水中应力腐蚀开裂试验的方法和相关技术要求。

Test method for stress corrosion cracking in high temperature pressurized water of metallic materials used in nuclear power plants - slow strain rate test

ICS
77.040.01
CCS
D441
发布
2021-07-26
实施
2022-06-30

本文件规定了核电金属构筑成形工艺用20MnNiMo合金钢连铸板坯的技术要求、试验方法、检验规则、标志、运输、贮存和质量证明书。

Addictive forging technique applied to alloy steel used in nuclear power plant - part 1:Continuous casting slab

ICS
77.040.01
CCS
D441
发布
2021-07-26
实施
2022-06-30

本文件规定了采用金属构筑成形工艺生产的20MnNiMo合金钢构筑坯锻造加热技术要求。

Addictive forging technique applied to alloy steel used in nuclear power plant - part 3:Heating for forging

ICS
77.040.01
CCS
D441
发布
2021-07-26
实施
2022-06-30



Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号