共找到 506 条与 金属材料无损检测 相关的标准,共 34 页
Metallographic examination method of medium and high strength stainless steel castings for general engineering applications
Steel and iron castings—Liquid penetrant inspection
本标准规定了铸钢铸铁件磁粉检测的一般要求、验收准则、显示的分级和评定、复验、检测记录和报告等。 本标准适用于铁磁性铸钢铸铁件表面及近表面缺陷的磁粉检测。
Steel and iron castings—Magnetic particle inspection
Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections
Method of ultrasonic testing for round steel
Castings—Radiographic testing
Castings—Industrial computed tomography (CT) testing
本标准规定了铝合金铸件(以下简称铸件)射线照相检测的人员要求、底片要求、缺陷分级、等级评定和评定记录。 本标准适用于透照厚度不大于50 mm的铝合金铸件射线照相检测的缺陷分级。 本标准不适用于铝合金压铸件。 本标准不适用于裂纹、浇不足、偏芯、冷隔及表面不规则等缺陷的分级。
Radiograpial testing for aluminum alloy castings.Defect levels
Metal materials—Method of electromagnetic acoustic inspection—Part 3: Standard practice for ultrasonic surface examinations using electromagnetic acoustic transducer (EMAT) techniques
Metal materials—Method of electromagnetic acoustic inspection—Part 2: Standard practice for ultrasonic testing using electromagnetic acoustic transducer (EMAT) techniques
GB/T20935 的本部分给出了使用电磁超声换能器(EMATs)进行超声检测的意义和用途、应用条件、标定、原理和系统配置指南。 本部分为确认电磁超声换能器在特定应用中的有效性提供基本参考。 注:本部分不包含电磁超声换能器特殊应用的详细方法,不提倡未经充分试验就将电磁超声换能器用于实际检测。 在附录A中简要介绍了电磁超声换能器的一些应用实例。
Metal materials—Method of electromagnetic acoustic inspection—Part 1: Standard guide for electromagnetic acoustic transducers (EMATs)
Spheroidal graphite iron castings—Ultrasonic testing
Method of ultrasonic inspection for wrought zirconium and zirconium alloy products
Eddy current testing method for zirconium and zirconium alloy tube
本标准规定了无缝钢管和焊接钢管(埋弧焊除外)缺欠的自动涡流检测的要求,缺欠的验收等级见表1和表2。 本标准适用于外径大于等于4 mm钢管的涡流检测。本标准也可适用于空心部件的检测。
Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for detection of imperfections
本标准规定了铁磁性圆钢漏磁检测的术语和定义、检测原理、检测方法、对比试样、检测设备、检测条件和步骤、结果判定和检测报告。 本标准适用于直径10 mm~350 mm圆钢(含钢丝)表面和近表面的漏磁检测。其他规格可参照本标准执行。
Method for magnetic flux leakage testing of round steel
本标准规定了厚钢板超声检测的一般要求、对比试样、检测仪器和设备、检测条件和方法、缺陷的测试与评定、钢板的质量分级、检测报告等。 本标准适用于厚度不小于6 mm的承压元件、桥梁、建筑、造船、钢结构、管线、模具等用途钢板的超声检测,奥氏体不锈钢板也可参照本标准。
Method for ultrasonic testing of thicker steel plates
本标准规定了无缝和焊接钢管(埋弧焊除外)的超声横波(由分立探头或相控技术产生)自动检测方法的一般要求,以确认其水压密实性。 本检测方法主要应用于纵向不连续性的检测。 必要时,制造商自行决定是否采用Lamb波检测。 本标准适用于检测外径不小于10 mm,且外径与壁厚之比不小于5的钢管。
Non-destructive testing of steel tubes.Automated ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for verification of hydraulic leak-tightness
本标准规定了厚钢板电磁超声自动检测的术语和定义、一般要求、对比试样、探伤装置、检测方法、检测记录和缺陷的评定、钢板的质量分级、检验报告等内容。 本标准适用于厚度不小于6 mm的锅炉、压力容器、桥梁、建筑、造船、管线、模具等用途钢板的电磁超声波自动检测。其他规格的钢板可参照本标准执行。
Method for electromagnetic automatic ultrasonic testing for thicker steel plates
本标准规定了金属板材超声板波探伤方法的术语和定义、一般要求、探伤设备、对比试样、板波模式的选择、探伤方法及缺陷评定等内容。 本标准适用于厚度不大于受检板材表面波波长5倍的金属板材超声板波探伤,但必须证实所激发的声波确为板波,并能以足够的探伤灵敏度进行探伤。
Flaw detection method by the ultrasonic plate wave for metal plates
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号