77.140.10 热处理钢 标准查询与下载

KS D 3624-2008(2018) 冷镦用硼钢第1部分:线材

Boron steels for cold heading－Part 1：Wire rods

KS D 3592-2008(2023) 冷镦用碳钢第1部分:线材

Carbon steels for cold heading－Part 1：Wire rods

KS D 7033-2008(2023) 冷镦用碳钢第2部分:线材

Carbon steels for cold heading－Part 2：Wires

NF A35-551:2008 表面硬化钢.交货技术条件

Case hardening steels - Technical delivery conditions.

DIN EN 10084:2008 表面硬化钢.交货技术条件.英文版本DIN EN 10084-2008-06

1.1 This European Standard gives the technical delivery requirements for: semi-finished products, hot formed, for example blooms, billets, slabs (see NOTE 2 and NOTE 3), bars (see NOTE 2), rod, wide flats, quarto plates, hot-rolled sheet/plate and strip, hammer and drop forgings (see NOTE 2), manufactured from the case hardening non alloyed or alloyed steels (see NOTE 4) listed in Table 3 and sup- plied in one of the heat treatment conditions given for the different types of products in Table 1, lines 2 to 7 and in one of the surface conditions given in Table 2. The steels are in general intended for the fabrication of case-hardened (see Clause 3) machine parts. NOTE I European Standards relating to steels complying with the requirements for the chemical composition in Ta- ble 3 but which are supplied in other product forms or treatment conditions than given above or are intended for special applications, and European Standards for similar steel grades are listed in the Bibliography. NOTE 2 Hammer-forged semi-finished products (blooms, billets, slabs, etc.), seamless rolled rings and hammer-forged bars are included under semi-finished products or bars and not under the term "hammer and drop forgings". NOTE 3 Special agreements shall be made when ordering non-deformed continuously cast semi-finished products. NOTE 4 In accordance with EN 10020, the steels covered by this European Standard are special steels. 1.2 In special cases variations in these technical delivery requirements or additions to them may form the subject of an agreement at the time of enquiry and order (see Annex A). 1.3 In addition to the specifications of this European Standard, the general technical delivery requirements of EN 10021 are applicable, unless otherwise specified.

Case hardening steels - Technical delivery conditions; English version of DIN EN 10084:2008-06

KS D 3749-2008(2018) 特殊合金钢材化工厂

Special alloys steel for chemical plant

KS D 3749-2008(2023) 化工厂用特种合金钢

Special alloys steel for chemical plant

KS D 3749-2008 化学设备用特殊合金

이 표준은 내식, 내열 및 내압성을 요하는 화학 플랜트용 특수 합금(이하 특수 합금이라 한

Special alloys steel for chemical plant

DS/EN 10084:2008 表面硬化钢 交货技术条件

1.1 This European Standard gives the technical delivery requirements for:- semi-finished products, hot formed, for example blooms, billets, slabs (see NOTE 2 and NOTE 3),- bars (see NOTE 2),- rod,- wide flats, quarto plates,- hot-rolled sheet/plate and strip,- hammer and drop forgings (see NOTE 2),manufactured from the case hardening non alloyed or alloyed steels (see NOTE 4) listed in Table 3 and sup-plied in one of the heat treatment conditions given for the different types of products in Table 1, lines 2 to 7 and in one of the surface conditions given in Table 2.The steels are in general intended for the fabrication of case-hardened (see Clause 3) machin

Case hardening steels - Technical delivery conditions

EN 10084:2008 渗碳钢.技术交货条件［代替:GME QS 101000］

This European Standard gives the technical delivery requirements for: semi-finished products, hot formed, for example blooms, billets, slabs (see NOTE 2 and NOTE 3), bars (see NOTE 2), rod, wide flats, quarto plates, hot-rolled sheet/plate and strip, hammer and drop forgings (see NOTE 2), manufactured from the case hardening non alloyed or alloyed steels (see NOTE 4) listed in Table 3 and supplied in one of the heat treatment conditions given for the different types of products in Table 1, lines 2 to 7 and in one of the surface conditions given in Table 2. The steels are in general intended for the fabrication of case-hardened (see Clause 3) machine parts. NOTE 1 European Standards relating to steels complying with the requirements for the chemical composition in Table 3 but which are supplied in other product forms or treatment conditions than given above or are intended for special applications, and European Standards for similar steel grades are listed in the Bibliography. NOTE 2 Hammer-forged semi-finished products (blooms, billets, slabs, etc.), seamless rolled rings and hammer-forged bars are included under semi-finished products or bars and not under the term "hammer and drop forgings". NOTE 3 Special agreements shall be made when ordering non-deformed continuously cast semi-finished products. NOTE 4 In accordance with EN 10020, the steels covered byThis European Standard are special steels. In special cases variations in these technical delivery requirements or additions to them may form the subject of an agreement at the time of enquiry and order (see Annex A). In addition to the specifications of this European Standard, the general technical delivery requirements of EN 10021 are applicable, unless otherwise specified.

Case hardening steels - Technical delivery conditions

JIS G 4805:2008 高碳铬轴承钢

この規格は，転がり軸受に使用する高炭素クロム軸受鋼鋼材(以下，鋼材という。)について規定する。

High carbon chromium bearing steels

JIS G 4804:2008 易切削钢

この規格は，特に被削性を向上させるために炭素鋼に硫黄を添加，又はりん及び/又は鉛を硫黄に複合 して作られた快削鋼鋼材(以下，鋼材という。)について規定する。

Free-cutting steels

DS-håndbog 111.4:2008 钢铁 第4部分：热处理用钢

This handbook for steel includes standards for technical delivery conditions for steels for heat treatment, including quenched and tempered steels, case hardning steels, nitriding steels and free-cutting steels.

Iron and steel - Part 4: Steels for heat treatment

ASTM A681-08(2015) 工具钢合金的标准规格

1.1 This specification covers the chemical, mechanical, and physical requirements for available wrought alloy tool steel products. 1.2 These products, which include hot or cold finished bar, plate, sheet, strip, rod, wire, or forgings, are normally fabricated into tools, dies, or fixtures. The selection of a material for a particular application will depend upon design, service conditions, and desired properties. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

Standard Specification for Tool Steels Alloy

KS D 3506-2007 连续热镀锌薄钢板和钢带

이 규격은 질량 백분율로 97 % 이상의 아연을 함유한 도금조(다만, 일반적으로 알루미늄을

Hot-dip zinc-coated steel sheets and coils

KS D 3530-2007 普通结构用轻量型材

이 규격은 건축 기타의 구조물에 사용하는 냉간 성형 경량 형강(이하, 경량 형강이라 한다.

Light gauge steels for general structure

DS/EN 10083-3:2007 淬火和回火用钢 第3部分：合金钢的技术交货条件

This part of EN 10083, in addition to Part 1, specifies the technical delivery requirements for:- semi-finished products, hot formed, e.g. blooms, billets, slabs (see NOTES 2 and 3 in EN 10083-1:2006, Clause 1),- bars (see NOTE 2 in EN 10083-1:2006, Clause 1),- rod,- wide flats,- hot-rolled strip and sheet/plate,- forgings (see NOTE 2 in EN 10083-1:2006, Clause 1),manufactured from the direct hardening alloy steels for quenching and tempering and the alloy flame and induction hardening steels and supplied in one of the heat treatment conditions given for the different types of products in Table 1, lines 2 to 6, and in one of the surface conditions given in

Steels for quenching and tempering - Part 3: Technical delivery conditions for alloy steels

DS/EN 10083-2:2007 淬火和回火用钢 第2部分：非合金钢的技术交货条件

This part of EN 10083, in addition to Part 1, specifies the technical delivery requirements for:- semi-finished products, hot formed, e.g. blooms, billets, slabs (see NOTES 2 and 3 in EN 10083-1:2006, Clause 1),- bars (see NOTE 2 in EN 10083-1:2006, Clause 1),- rod,- wide flats,- hot-rolled strip and sheet/plate,- forgings (see NOTE 2 in EN 10083-1:2006, Clause 1),manufactured from the direct hardening non alloy steels for quenching and tempering and the non alloy flame and induction hardening steels and supplied in one of the heat treatment conditions given for the different types of products in Table 1, lines 2 to 7, and in one of the surface conditions g

Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels

DS/EN 10083-1:2007 淬火和回火用钢 第1部分：一般技术交货条件

This part of EN 10083 specifies the general technical delivery requirements for- semi-finished products, hot formed, e.g. blooms, billets, slabs (see NOTES 2 and 3),- bars (see NOTE 2),- rod,- wide flats,- hot-rolled strip and sheet/plate,- forgings (see NOTE 2)manufactured from the direct hardening non alloy steels for quenching and tempering (see EN 10083-2), the direct hardening alloy steels for quenching and tempering (see EN 10083-3), the non alloy flame and induction hardening steels (see EN 10083-2) and the alloy flame and induction hardening steels (see EN 10083-3), and supplied in one of the heat treatment conditions given for the different types o

Steels for quenching and tempering - Part 1: General technical delivery conditions

KS D 3703-2007 不锈钢钢丝

이 규격은 스테인리스 강선 및 약 10.5 % 이상의 크롬을 포함하는 내열 강선(이하 선이

Stainless steel wires