共找到 1827 条与 扁平钢和半成品 相关的标准,共 122 页
Continuously hot rolled high strength steel sheet and strip for automobile—Part 7:Steels for hydraulic forming
GB/T 20564的本部分规定了冷轧双相高强度钢板及钢带的术语和定义、分类和牌号表示方法、订货内容、尺寸、外形、重量、技术要求、试验方法、检验规则、包装、标志及质量证明书。 本部分适用于制造汽车结构件、加强件以及部分内外板用厚度为0.50 mm~3.00 mm的钢板及钢带(以下简称“钢板及钢带”)。
Continuously cold rolled high strength steel sheet and strip for automobile.Part 2: Dual phase steel
Cold rolled stainless steel plate,sheet and strip for construction roof and curtain
Cold-reduced electrolytic tinplate
Cold rolled steel strip for battery shell
Continuously cold rolled high strength steel sheet and strip for automobile—Part 1: Bake hardening steel
Wide and heavy plates for offshore line pipe
Continuously cold rolled high strength steel sheet and strip for automobile—Part 10: Twinning induced plasticity steel
Continuously hot rolled high strength steel sheet and strip for automobile—Part 1: High yield strength steel for cold forming
Continuously cold rolled high strength steel sheet and strip for automobile—Part 11:Carbon manganese steel
Hot rolling checker steel sheet and strip
Steel plates and sheets for truck carriage
Hot rolled wide strips for coal slurry line pipe
Hot rolled steel sheet and strip for bogie frame of high-speed train
Alloy tool and mould steel sheets and plates
本标准规定了碳素结构钢和低合金结构钢热轧钢板和钢带的订货内容、尺寸、外形、重量、技术要求、试验方法、检验规则、包装、标志及质量证明书。 本标准适用于厚度不大于400 mm 的碳素结构钢和低合金结构钢热轧钢板和钢带(以下简称钢板和钢带)。
Hot-rolled plates、sheets and strips of carbon structural steels and high strength low alloy structural steels
本标准规定了优质碳素结构钢热轧钢板和钢带的尺寸、外形、重量、技术要求、试验方法、检验规则、包装、标志及质量证明书。 本标准适用于厚度不大于100 mm、宽度不小于600 mm的优质碳素结构钢热轧钢板和钢带(以下简称钢板和钢带)。
Hot-rolled quality carbon structural steel plates sheets and strips
本标准规定了轨道车辆用不锈钢钢板和钢带的分类和代号、订货内容、尺寸、外形、重量、技术要求、试验方法、检验规则、包装、标志及质量证明书。 本标准适用于制造轨道交通车辆车体结构及其他辅件用的不锈钢钢板和钢带(以下简称钢板和钢带)。无轨道交通车辆可参考使用。
Stainless steel plate,sheet and strip for rail vehicle
本标准规定了冷弯型钢用热连轧钢板及钢带的牌号表示方法、订货内容、尺寸、外形、重量、技术要求、试验方法、检验规则、包装、标志和质量证明书。 本标准适用于厚度不大于25.4 mm的冷弯型钢用热连轧钢带及由钢带横切成的钢板(以下简称钢板及钢带)。
Continuously hot-rolled steel sheet and strip for cold-forming steel sections
本标准规定了汽车桥壳用热轧钢板和钢带的牌号表示方法、订货内容、尺寸、外形、重量及允许偏差、技术要求、特殊要求、试验方法、检验规则、包装、标志及质量证明书等。 本标准适用于制造汽车桥壳用厚度为2.0 mm~18.0 mm的热轧钢板和钢带(以下简称钢板和钢带)。
Hot-rolled steel plate, sheet and strip for automobile axle housings
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号