77.140.80 钢铁铸件 标准查询与下载
共找到 992 条与 钢铁铸件 相关的标准，共 67 页
1.1 This specification2 covers austenitic steel castings for valves, flanges, fittings, and other pressure-containing parts (Note 1). Note 1: Carbon steel castings for pressure-containing parts are covered by Specification A216/A216M, low-alloy steel castings by Specification A217/A217M, and duplex stainless steel castings by Specification A995/A995M. 1.2 A number of grades of austenitic steel castings are included in this specification. Since these grades possess varying degrees of suitability for service at high temperatures or in corrosive environments, it is the responsibility of the purchaser to determine which grade shall be furnished. Selection will depend on design and service conditions, mechanical properties, and high-temperature or corrosion-resistant characteristics, or both. 1.2.1 Because of thermal instability, Grades CE20N, CF3A, CF3MA, and CF8A are not recommended for service at temperatures above 800°F [425°C]. 1.3 Supplementary requirements of an optional nature are provided for use at the option of the purchaser. The Supplementary requirements shall apply only when specified individually by the purchaser in the purchase order or contract. 1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.4.1 This specification is expressed in both inch-pound units and in SI units; however, unless the purchase order or contract specifies the applicable M specification designation (SI units), the inch-pound units shall apply. Within the text, the SI units are shown in brackets or parentheses.
Standard Specification for Castings, Austenitic, for Pressure-Containing Parts
- ICS
- 77.140.80
- CCS
- H43;J31
- 发布
- 2016
- 实施
Carbon and low alloy cast steels for general applications
- ICS
- 77.140.80
- CCS
- H43
- 发布
- 2015-12-31
- 实施
- 2015-12-31
Steel castings－General technical delivery requirements
- ICS
- 77.140.80
- CCS
- 发布
- 2015-12-30
- 实施
Steel castings－General technical delivery requirements
- ICS
- 77.140.80
- CCS
- 发布
- 2015-12-30
- 实施
Steel castings－General technical delivery requirements
- ICS
- 77.140.80
- CCS
- 发布
- 2015-12-30
- 实施
Carbon and low alloy cast steels for general applications
- ICS
- 77.140.80
- CCS
- H40
- 发布
- 2015-12
- 实施
Cast Iron Cooling Wall for Blast Furnace
- ICS
- 77.140.80
- CCS
- H 48
- 发布
- 2015-11-06
- 实施
- 2016-01-01
Investment castings (steel, nickel alloys and cobalt alloys). General technical requirements
- ICS
- 77.140.80
- CCS
- J31
- 发布
- 2015-10-31
- 实施
- 2015-10-31
Determination of ferrite content in austenitic stainless steel castings
- ICS
- 77.140.80
- CCS
- J31
- 发布
- 2015-10-31
- 实施
- 2015-10-31
Austenitic manganese steel castings
- ICS
- 77.140.80
- CCS
- J31
- 发布
- 2015-10-31
- 实施
- 2015-10-31
本标准规定了单工位和多工位铁型覆砂造型机的术语和定义、型号与参数、技术要求、检验方法、检验规则、标志、包装与储运和质量保证期。 本标准适用于铁型覆砂铸造用单工位、多工位造型机，也适用于铁型覆砂铸造机械化生产线用造型机。
Sand-lined iron mould molding machine
- ICS
- 77.140.80
- CCS
- J31
- 发布
- 2015-10-10
- 实施
- 2016-03-01
本标准规定了一般工程用耐腐蚀双相(奥氏体-铁素体)不锈钢铸件(以下简称铸件)的订货要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于一般工程用耐腐蚀双相不锈钢铸件。
Corrosion-resistant duplex (austenite-ferrite) stainless steel castings for general application
- ICS
- 77.140.80
- CCS
- J31
- 发布
- 2015-10-10
- 实施
- 2016-03-01
本标准规定了承压部件用耐腐蚀双相(奥氏体-铁素体)不锈钢铸件(以下简称铸件)的订货要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于承压部件用耐腐蚀双相不锈钢铸件。
Corrosion-resistant duplex (austenite-ferrite) stainless steel casting for pressure-containing parts
- ICS
- 77.140.80
- CCS
- J31
- 发布
- 2015-10-10
- 实施
- 2016-03-01
Determination of ferrite content in austenitic stainless steel castings
- ICS
- 77.140.80
- CCS
- J31
- 发布
- 2015-10
- 实施
This International Standard specifies austenitic manganese cast steels for wear-resistant service. The grades covered by this International Standard will experience maximum service life in applications where the surface of the casting is subject to impact.
Austenitic manganese steel castings
- ICS
- 77.140.80
- CCS
- J31
- 发布
- 2015-10
- 实施
This International Standard specifies technical requirements for castings (steel, nickel alloys, and cobalt alloys) produced by the investment-casting process. The International Standards specifying metallurgical material requirements for steel, nickel alloy, and cobalt alloy casting grades are listed in the Bibliography. The requirements stated in this International Standard form an integral part of the material specification. In cases of conflict, the requirements of this specification take precedence over the individual material specification requirements.
Investment castings (steel, nickel alloys and cobalt alloys) - General technical requirements
- ICS
- 77.140.80
- CCS
- J31
- 发布
- 2015-10
- 实施
Cast steels and alloys with special physical properties
- ICS
- 77.140.80
- CCS
- J31
- 发布
- 2015-09-30
- 实施
- 2015-09-30
Steel castings. General technical delivery requirements
- ICS
- 77.140.80
- CCS
- J31
- 发布
- 2015-09-30
- 实施
- 2015-09-30
Centrifugally cast steel and alloy products. Heat-resistant materials
- ICS
- 77.140.80
- CCS
- H40
- 发布
- 2015-09-30
- 实施
- 2015-09-30
Centrifugally cast steel and alloy products. General testing and tolerances
- ICS
- 77.140.80
- CCS
- H40
- 发布
- 2015-09-30
- 实施
- 2015-09-30
