共找到 989 条与 钢铁铸件 相关的标准,共 66 页
1.1 This specification covers iron-chromium-nickel alloy stainless steel castings intended for particularly severe corrosive applications. 1.2 This specification requires post-weld heat treatment of all weld repairs affecting surfaces intended to be wetted by the corrosive medium. For applications for which post-weld heat treatment is not considered mandatory for retention of acceptable corrosion resistance, refer to Specification A743/A743M. NOTE 1—For general corrosion-resistant alloy castings, reference should be made to Specification A743/A743M. For general heat-resistant alloy castings, reference should be made to Specification A297/A297M. For nickel-base alloy castings, refer to Specification A494/A494M. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard. 1.3.1 Within the text, the SI units are shown in brackets. 1.3.2 Inch-pound units are applicable for material ordered to Specification A744 and SI units for material ordered to Specification A744M. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service
本文件规定了金属材料在温度高于室温条件下销-盘摩擦磨损试验的术语及定义、试验原理、试样、试验设备及仪器、实验方法、试验结果处理及试验报告。 本文件适用于金属及其复合材料在辅助热源加热下温度高于室温条件下销-盘滑动摩擦条件下磨损量及摩擦系数的测定。
Metal materials_—Friction and wear testing with a pin-on-disk apparatus — Part 2: Friction and wear testing at high-temperature
本文件规定了金属材料在室温条件下销-盘摩擦磨损试验的术语及定义、试验原理、试样、试验设备及仪器、试验方法、试验结果处理及试验报告。 本文件适用于金属及其复合材料在室温条件下销-盘滑动摩擦条件下磨损量及摩擦系数的测定。
Metal materials-Friction and wear testing with a pin-on-disk apparatus - Part 1: Friction and wear testing at ambient temperature
Corrosion resistant steel castings
Standard Specification for Gray Iron Castings
1.1 This specification covers iron-chromium and ironchromium-nickel alloy castings for heat-resistant service. The grades covered by this specification are general purpose alloys and no attempt has been made to include heat-resisting alloys used for special production application. NOTE 1—For heat-resisting alloys used for special product application, reference should be made to Specifications A351/A351M, A217/A217M, and A447/A447M. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application
1.1?This specification2 covers carbon steel castings for valves, flanges, fittings, or other pressure-containing parts for high-temperature service and of quality suitable for assembly with other castings or wrought steel parts by fusion welding. 1.2?Three grades, WCA, WCB, and
Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service
Chromium molybdenum steel forgings for general use
Carbon and low alloy cast steels for general applications
本文件规定了大型矿用液压挖掘机用合金钢材质重型履带板(简称履带板)铸件的术语和定义、制造工艺、技术要求、检验规则与试验方法、质量证明书、铸件标志、涂装、包装和贮运。
Alloy steel track pads for large mining excavators -Technical specification
本文件规定了大型矿用机械式挖掘机用高锰钢材质重型履带板铸件(简称履带板铸件)的术语和定义、制造工艺、技术要求、检验规则与试验方法、质量证明书、铸件标志、涂装、包装和贮运。
High manganese steel track pads for large mining excavators -Technical specification
-
Standard Test Method for Solar Absorptance, Reflectance, and Transmittance of Materials Using Integrating Spheres
This document specifies requirements for carbon and low alloy cast steel grades for general applications. NOTE 1 Annex A provides guidance on welding. NOTE 2 Annex B gives information on ISO grade designation and available UNS numbers which are similar to the ISO grade designation.
Carbon and low alloy cast steels for general applications
本文件规定了采用铁型覆砂工艺铸造的球墨铸铁盘式制动器用铸件(以下简称铸件)的技术要求,试验方法,检验规则,标志、标签和随行文件,包装、运输和贮存。
Spheroidal graphite cast iron Disk brake castings produced with sand-lined metal mould
1.1?This practice2 provides a uniform procedure for radiographic examination of metallic castings using radiographic film as the recording medium. 1.2?This standard addresses the achievement of, or protocols for achieving, common or practical levels of radiographic coverage for
Standard Practice for Radiographic Examination of Metallic Castings
Carbon steel forgings for general use
Carbon steel patcher for pipes
Technical conditions of alloy steel forgings for offshore platform transmission parts
Technical conditions for electroslag casting of large hydraulic turbine castings
本文件规定了滚筒采煤机铸钢件的总体要求、技术要求、制造工艺、试验方法和检验规则、质量证明书、标识、防护、包装和运输。
Technical specifications for steel castings of shearer
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号