77.150.10 铝产品 标准查询与下载

ASTM B211/B211M-23 轧制或冷加工的铝及铝合金棒材、棒材和线材的标准规范

Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire

T/SHLX 002-2023 汽车用宽幅薄壁铝及铝合金挤压型材

1、明确了宽幅薄壁铝型材的定义。 2、阐述了汽车用宽幅薄壁铝及铝合金挤压型材的产品分类、化学成分、尺寸偏差、力学性能、低倍组织、显微组织、外观质量的主要影响因素。 3、对汽车用宽幅薄壁铝及铝合金挤压型材的试验方法、检验规则、标志、包装、运输、贮存及质量证明书进行了明确的规定。

Wide and thin-walled aluminum and aluminum alloys extruded profiles for automobiles

T/HEBQIA 185-2023 美甲、卸甲用铝箔

本文件规定了美甲、卸甲用铝箔的要求、试验方法、检验规则、标志、包装、贮存和运输。

Aluminum foil for manicure and nail removal

T/HEBQIA 186-2023 美发用抽取式铝箔

本标准规定了美发用抽取式铝箔的要求、试验方法、检验规则、标志、包装、运输和贮存。

Removable aluminum foil for hairdressing

T/CIET 200-2023 600kA大型铝电解槽技术规范

本文件规定了600kA铝电解槽的术语和定义、焙烧启动、工艺参数调整、工艺操作、工艺参数测量等要求。 本文件适用于600kA铝电解槽系列。

Technical Specifications for 600kA Large Aluminum Electrolytic Cell

T/SGZX 007-2023 新能源汽车电池冷却用钎焊铝合金板材

本文件规定了新能源汽车电池冷却用钎焊铝合金板材的术语和定义、技术要求、试验方法、检验规则、标志、包装、运输、贮存及质量证明书。

Brazed aluminum alloy plates for new energy vehicle battery cooling

T/CASME 538-2023 铝合金脚手架生产及搭设技术要求

本文件规定了铝合金脚手架生产及搭设技术要求的术语和定义、基本规定、材料与构配件、生产设备、生产、荷载、构造、搭设、质量控制。

Technical requirements for production and installation of aluminum alloy scaffolding

T/FSAS 73-2023 穿条式隔热型材生产工艺技术规范

文件规定了穿条式隔热型材生产的工艺流程、基本要求、生产工艺要求、检验规则及产品质量控制内容

Technical specifications for the production process of strip-type thermal insulation profiles

T/CASME 523-2023 热挤压铝材及其加工技术规范

本文件规定了热挤压铝材及其加工技术规范的加工技术、产品分类、牌号、供应状态、尺寸规格及标记、技术要求、试验方法、检验规则、标志、包装、运输、贮存、质量证明书。

Technical specifications for hot extruded aluminum materials and their processing

BS EN 1396:2023 铝及铝合金 适用于一般应用的卷材涂层板材和带材 规格

1   Scope This document specifies the particular requirements for wrought aluminium and wrought aluminium alloys in the form of coil coated sheet and strip for general applications. This product is generally supplied in thicknesses up to 3,0 mm. It is applicable to cold-rolled aluminium and aluminium alloy strip coated by the coil coating process both with liquid as well as with powder paints, either in the final width or slit afterwards, and to sheet obtained from such strip. It does not apply to coil coated sheet and strip used for special applications such as cans, closures and lids which are dealt with in separate EN 541.

Aluminium and aluminium alloys. Coil coated sheet and strip for general applications. Specifications

23/30471464 DC BS EN 754-2 铝及铝合金 冷拔棒材和管材 第 2 部分：机械性能

BS EN 754-2. Aluminium and aluminium alloys. Cold drawn rod/bar and tube - Part 2. Mechanical properties

23/30471467 DC BS EN 755-2 铝及铝合金 挤压棒材、管材和型材 第 2 部分：机械性能

BS EN 755-2. Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles - Part 2. Mechanical properties

YS/T 429.1-2023 铝幕墙板 第1部分：基材

Aluminum curtain wall panel - Part 1: Mill finish sheet and strip

T/FSAS 70-2023 穿条式隔热型材生产工艺技术规范

文件规定了穿条式隔热型材生产的工艺流程、基本要求、生产工艺要求、检验规则及产品质量控制内容

Technical specifications for the production process of strip-type heat-insulating profiles

T/SSLX 0001-2023 铝灰渣再生氧化铝原料

铝灰渣湿法再生处理工艺和铝灰渣火法再生处理工艺的采用说明； 规定了铝灰渣再生氧化铝原料的分类、技术要求、试验方法、检验规则、标志、包装、运输、贮存及质量证明书和订货单（或合同）内容。

Recycling materials from aluminium alloy slag and ash

ASTM B557-15(2023) 锻造和铸造铝及镁合金产品拉伸试验的标准试验方法

1.1 These test methods cover the tension testing of wrought and cast aluminumand magnesium-alloy products, with the exception of aluminum foil,2 and are derived from Test Methods E8, which cover the tension testing of all metallic materials. 1.2 The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. NOTE 1—Foil is sheet metal less than 0.0079 in. thick. There is an overlap in the thickness range 0.006 to 0.0079 in. defined for foil and sheet. Sheet products in this thickness range are supplied to sheet product specifications and foil products in this thickness range are supplied to foil product specifications. Exceptions to the provisions of these test methods may need to be made in individual specifications or test methods for a particular material. NOTE 2—A complete metric companion to Test Methods B557 has been developed—Test Methods B557M; therefore, no metric equivalents are presented in these test methods. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products

ASTM B557M-15(2023) 锻造和铸造铝及镁合金产品拉伸试验的标准试验方法（米制）

1.1 These test methods cover the tension testing of wrought and cast aluminumand magnesium-alloy products, with the exception of aluminum foil,2 and are derived from Test Methods E8M, which cover the tension testing of all metallic materials. NOTE 1—These metric test methods are the equivalents of those in Test Methods B557, and are compatible in technical content except for the requirement of longer gage lengths for round specimens. NOTE 2—Foil is sheet metal less than 0.20 mm thick. There is an overlap in the thickness range 0.15 mm to 0.20 mm defined for foil and sheet. Sheet products in this thickness range are supplied to sheet product specifications and foil products in this thickness range are supplied to foil product specifications. Exceptions to the provisions of these test methods may need to be made in individual specifications or test methods for a particular material. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products (Metric)

T/QGCML 694-2023 低线损节能导线用铝杆

本标准规定了低线损节能导线用铝杆的术语和定义、技术要求、检验方法、检验规则、标志、包装、运输和贮存。      本标准适用于低线损节能导线用铝杆的生产及检验。

Aluminum Rod for Low Line Loss and Energy Saving Conductor

T/CFA 020101012-2023 乘用车发动机用压铸铝合金油底壳

本文件规定了乘用车发动机用压铸铝合金油底壳的术语和定义、总体要求、技术要求、试验方法、检验规则、质量证明书、标志、防护、包装和运输。 本文件适用于采用压铸工艺生产的乘用车发动机用铝合金油底壳的制造。

Aluminum alloy die casting oil pan for passenger car engine

T/CNIA 0171-2022 绿色设计产品评价技术规范 铝合金家具型材

本文件规定了铝合金家具型材绿色设计产品评价的评价要求、产品生命周期评价报告编制方法、评价方法和流程。 本文件适用于铝合金家具型材绿色设计产品评价。

Green design product evaluation technical specifications for aluminum alloy furniture profiles