77.150.10 铝产品 标准查询与下载

BS EN 851:2022 铝及铝合金 用于生产烹饪用具的圆形和圆形坯料 规格

1   Scope This document specifies the particular requirements for wrought aluminium and aluminium alloys in the form of circle or circle stock for culinary utensils applications. This document is applicable to: — circles made out of hot or cold rolled circles stock, with a thickness from 0,2 mm up to and including 12 mm and with a diameter from 100 mm up to and including 1 600 mm; NOTE Circles with a diameter up to 1 000 mm can be produced by blanking. — hot or cold-rolled circle stock with a thickness from 0,2 mm up to and including 12 mm and with a width up to 1 600 mm. This document is not applicable to slugs for impact extrusions which are dealt with in other European Standards.

Aluminium and aluminium alloys. Circle and circle stock for the production of culinary utensils. Specifications

T/STSI 37-2022 基于二维码标签的铝合金模板技术规范

1 术语和定义 2 分类、规格、标记和结构 3 一般要求 4 技术要求 5 试验方法 6 标志、包装、运输、贮存

Technical specification of aluminum alloy template based on QR code label

T/STSI 38-2022 镀膜铝合金模板技术规范

1 术语和定义 2 分类、规格、标记和结构 3 一般要求 4 技术要求 5 试验方法 6 标志、包装、运输、贮存

Technical specification for coated aluminum alloy formwork

T/STSI 39-2022 电梯升降机用高强度铝合金技术规范

1 术语和定义 2 产品结构 3要求 4 试验方法 5 标志、包装、运输和贮存

Technical specification for high strength aluminum alloy for elevator

GSO ASTM E1977:2022 战术、可扩展、单侧庇护所标准规范

This specification covers a rigid wall, one-side expandable shelter constructed of aluminum-faced, nonmetallic honeycomb sandwich panels. Design and construction requirements of the expandable shelter shall conform to the requirements on the drawings, all subsidiary drawings and parts lists. Also, design and construction requirements for panels, inserts, payload, corner fittings, exterior lighting, and shelter electrical systems shall be met. The following test shall be conducted for each panel: electrical continuity test, water leakage test, performance test, paint adhesion test, packaging examination, thermal shock test, panel interchange test, insert proof load test, floor load test, roof load test, door load test, step test, airtightness test, low temperature test, high temperature test, humidity test, aging test, blackout test, panel watertightness test, insert working load test, rail transportability test, impact resistance test, drop test, towing test, fluorescent light temperature test, solar load test, operational test, lifting test, six high stacking test, longitudinal restraint test, racking test, lashing test, end wall strength test, sidewall strength test, lifting from fork lift pockets test, heat transfer test, panel delamination test, thickness test, and electrical system test.

Standard Specification for Shelter, Tactical, Expandable, One-Side

GSO ASTM B148:2022 铝青铜砂铸件标准规范

This specification establishes requirements for sand castings produced from copper-base alloys having the alloy numbers, commercial designations, and nominal compositions. The alloys the classified according to their nominal compositions: UNS No. C95200; UNS No. C95300; UNS No. C95400; UNS No. C95410; UNS No. C95500; UNS No. C95520; UNS No. C95600; UNS No. C95700; UNS No. C95800; UNS No. C95820; and UNS No. C95900. The castings shall conform to the chemical requirements specified. Mechanical properties shall be determined from separately cast test bar castings and shall meet the requirements. Brineel and Rockwell hardness readings shall be taken on the grip end of the tension test bar and shall be made in accordance with the specified requirements.

Standard Specification for Aluminum-Bronze Sand Castings

GSO ASTM E1978:2022 战术、可扩展、两侧的掩体标准规范

This specification covers a rigid wall, two-side expandable shelter constructed of aluminum-faced, nonmetallic honeycomb sandwich panels and meeting the International Organization for Standardization (ISO) cargo container specification in the transport mode. Design and construction of the expandable shelter shall conform to the requirements specified. The shelter shall be free of panel delaminations and shall meet all physical and environmental requirements specified. Inspection requirements shall be classified as follows: first article inspection; comparison sample inspection; and quality conformance inspection. The following tests shall be performed to conform to the specified requirements: electrical continuity testing; water leakage and operational testing; performance testing; packaging examination; thermal shock test; panel interchange test; floor loads test-static load; roof load test; step test; airtightness test; low temperature test; high temperature test; humidity and temperature aging test; blackout test; panel watertightness test; insert working load test; rail transportability test; impact resistance test; drop test; towing test; water leakage test (shelter mode); water leakage test (container mode); water leakage test (shelter mode fully loaded); water leakage test (container mode fully loaded); fluorescent light temperature test; solar load test; operational test; lifting test; six-high stacking test; longitudinal restraint test; racking test; lashing test; end wall strength test; sidewall strength test; lifting from fork lift pockets test; heat transfer test; adhesion of paint test; panel delamination test; thickness test; electrical system test; and panel frame airtightness test.

Standard Specification for Shelter, Tactical, Expandable, Two-Side

GSO EN 1396:2022 铝和铝合金.一般应用的卷材涂层薄板和带材.规格

This European Standard specifies the particular requirements for wrought aluminium and wrought aluminium alloys in the form of coil coated sheet and strip for general applications. This product is generally supplied in thicknesses up to 3,0 mm. It applies to cold-rolled aluminium and aluminium alloy strip coated by the coil coating process both with liquid as well as with powder paints, either in the final width or slit afterwards, and to sheet obtained from such strip. It does not apply to coil coated sheet and strip used for special applications such as cans, closures and lids which are dealt with in separate EN 541.

Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications

GSO ASTM E1976:2022 战术、不可扩展的避难所标准规范

This specification covers a rigid wall, nonexpendable shelter constructed of aluminum-faced, nonmetallic honeycomb sandwich panels. Electrical continuity testing, water leakage and operational testing, performance testing, paint adhesion testing, packaging examination, thermal shock test, panel interchange test, insert proof load test, floor load test, roof load test, door load test, step test, airtightness test, low temperature test, high temperature test, humidity and temperature aging test, blackout test, panel watertightness test, insert working load test, rail transportability test, and impact resistance test shall be performed to meet the requirements prescribed. Drop test, towing test, water leakage test, fluorescent light temperature test, solar load test, operational test, lifting test, six high stacking test, longitudinal restraint test, racking test, lashing test, end wall strength test, sidewall strength test, lifting from fork lift pockets test, heat transfer test, adhesion of paint test, panel delamination test, thickness test, electrical system test, and panel frame air tightness test shall be performed to meet the requirements prescribed.

Standard Specification for Shelter, Tactical, Nonexpandable

ASTM B746/B746M-22e1 现场螺栓连接管、管拱和拱用波纹铝合金结构板的标准规范

Standard Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches

ASTM B746/B746M-22 现场栓接管、管拱和拱用波纹铝合金结构板的标准规范

1.1 This specification covers corrugated aluminum alloy structural plate used in the construction of pipe, pipe-arches, arches, underpasses, box culverts, and special shapes for field assembly. Appropriate fasteners are also described. The pipe, arches, and other shapes are generally used for drainage purposes, pedestrian and vehicular underpasses, and utility tunnels. Aluminum box culvert shapes are covered in Specification B864/B864M. 1.2 This specification does not include requirements for bedding, backfill, or the relationship between earth cover load and plate thickness of the pipe. Experience has shown that the successful performance of this product depends upon the proper selection of plate thickness, type of bedding and backfill, controlled manufacture in the plant, and care in the installation. The purchaser must correlate the above factors and also the corrosion and abrasion requirements of the field installation with the plate thickness. The structural design of corrugated aluminum structural plate pipe and the proper installation procedures are given in Practices B790/B790M and B789/B789M, respectively. A procedure for using life-cycle cost analysis techniques to evaluate alternate drainage system designs using corrugated metal pipe is given in Practice A930. 1.3 The values stated in either inch-pound units or SI units are to be regarded separately as standard. The values stated in each system are not exact equivalents; therefore, each system shall be used independently of the other. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches

ASTM B752/B752M-22 一般用途耐腐蚀锆基铸件标准规范

1.1 This specification covers zirconium and zirconium-alloy castings for general corrosion-resistant and industrial applications. 1.2 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system shall be used independently of each other. Combining values from the two systems may result in nonconformance with this specification. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Castings, Zirconium-Base, Corrosion Resistant, for General Application

T/ZZB 2638-2022 锂离子数码电池用铝及铝合金光箔

本文件规定了锂离子数码电池用铝及铝合金光箔的基本要求、技术要求、试验方法、检验规则、标志、包装、运输、贮存、质量证明书和质量承诺。 本文件适用于锂离子数码电池用铝及铝合金光箔（以下简称铝光箔） 。

Aluminium and aluminium alloy light foil for lithium ion digital batteries

EN 12020-1:2022 铝及铝合金.合金EN AW-6060和EN AW-6063 的挤压精密型材.第1部分:检验和交付用技术条件

This document specifies technical conditions for inspection and delivery of alloys EN AW-6060 and EN AW-6063 extruded precision profiles manufactured with and without a thermal barrier (see Figures 1 and 2) and without further surface treatment. Precision profiles for which this document is applicable are distinguished from extruded profiles for general applications covered in EN 755-9 by the following characteristics: — they are designed with mostly uniform wall-thicknesses; — they are mainly used for mechanical engineering, architectural and automotive (except crash-elements) applications; — the maximum weight by meter is 10 kg/m; — the max. wall-thickness proportion (tmax/tmin) of 3,5. In the case of profiles, which, due to the complexity of their design are difficult to manufacture and specify, then special agreements between supplier and purchaser may need to be reached. NOTE The effect of the thermal barrier material on the dimensional tolerances is covered by EN 12020-2 although the actual thermal barrier material itself is not (see EN 14024).

Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 1: Technical conditions for inspection and delivery

SN/T 5418-2022 进口再生铸造铝合金原料检验规程

Inspection Regulations for Imported Recycled Cast Aluminum Alloy Raw Materials

T/CNIA 0128-2022 汽车防撞梁总成及总成用铝合金型材

本文件规定了汽车防撞梁总成及其使用的铝合金型材的要求、试验方法、检验规则和标志、包装、运输、贮存及随行文件。 本文件主要适用于汽车防撞梁总成及防撞梁总成使用的铝合金横梁型材、吸能盒型材、底板型材。

Automobile anti-collision beam assembly and aluminum alloy profile for assembly

T/CNIA 0129-2022 电动汽车用铝合金电池包下壳体

本文件规定了电动汽车用铝合金电池包下壳体的结构、质量保证、要求、试验方法、检验规则、标志、包装、运输、贮存、质量证明书与订货单（或合同）内容。 本文件适用于铝合金型材和板材为主体的电动汽车电池包下壳体。

Aluminum alloy battery pack lower case for electric vehicles

T/QGCML 233-2021 铝材加工工艺技术规范

本文件规定了铝材加工工艺技术规范的分类及流程、基本要求、铝材挤压工艺要求、粉末喷涂铝型材加工工艺要求、隔热型铝材加工工艺要求、检验规则、标志、包装及贮存。 本文件主要适用于6063铝合金型材的生产、加工。其中挤压工艺适用于6063、6063A、6005及纯铝型材的生产加工；隔热型材工艺适用于6063及其它相应铝合金建筑型材、穿条式复合隔热铝合金建筑型材的生产加工。

Aluminum processing technology specification

YS/T 1455-2021 汽车天窗导轨用铝合金型材

Aluminum alloy profiles for automobile sunroof guide rails

YS/T 1515-2021 铝-空燃料电池用铝合金电极材料

Aluminum alloy electrode materials for aluminum-air fuel cells