77.150.30 铜产品 标准查询与下载

T/QGCML 978-2023 空调输入输出管组件

本文件规定了空调输入输出管组件的技术要求、试验方法、检验规则、标志、包装、运输、贮存和质量证明书、订货单（或合同）内容。 本文件适用于空调输入输出管组件的生产、检验、采购活动。

Air conditioning input and output pipe components

T/JXTX 0005-2023 轨道交通装备用铝青铜挤制管

1  范围 本文件规定了轨道交通装备用铝青铜挤制管的分类和标记、技术要求、试验方法、检验规则、标志、包装、运输、贮存及随行文件和订货单内容。 本文件适用于轨道交通装备用的圆形铝青铜挤制管(以下简称管材)。 2  规范性引用文件 下列文件中的内容通过文中的规范性引用而构成本文件必不可少的条款。其中，注日期的引用文件，仅该日期对应的版本适用于本文件；不注日期的引用文件，其最新版本(包括所有的修改单)适用于本文件。 GB/T 231.1  金属材料 布氏硬度试验 第1部分：试验方法 GB/T 2423.17  电工电子产品基本环境试验规程—试验Ka：盐雾试验方法 GB/T 2828.1  计数抽样检验程序  第1部分：按接收质量限（AQL）检索的逐批检验抽样计划 GB/T 5121 (所有部分)  铜及铜合金化学分析方法 GB/T 5231  加工铜及铜合金牌号和化学成分 GB/T 8170  数值修约规则与极限数值的表示和判定 GB/T 8653  金属材料杨氏模量、弦线模量和切线模量试验方法 GB/T 8888  重有色金属加工产品的包装、标志、运输、贮存和质量证明书 GB/T 12444  金属材料 磨损试验方法 试环-试块滑动磨损试验 GB/T 16866  铜及铜合金无缝管材外形尺寸及允许偏差 GB/T 26303.1  铜及铜合金加工材外形尺寸检测方法 第1部分：管材 GB/T 34505—2017  铜及铜合金材料 室温拉伸试验方法 YS/T 336  铜、镍及其合金管材和棒材断口检验方法 YS/T 482  铜及铜合金光电直读光谱分析 YS/T 483  铜及铜合金分析方法X射线荧光光谱法(波长色散型) YS/T 668  铜及铜合金理化检测取样方法 YS/T 815  铜及铜合金力学性能和工艺性能试样的制备方法 3  术语和定义 4  分类和标记 4.1  产品分类 4.2  产品标记 5  技术要求 5.1  化学成分 5.2  外形尺寸及其允许偏差 5.3  力学性能 5.4  耐磨损性能 5.5  耐腐蚀性能 5.6  内部质量 5.7  表面质量 6  试验方法 6.1  化学成分 6.2  外形尺寸及其允许偏差 6.3  力学性能 6.4  耐磨损性能 6.5  耐腐蚀性能 6.6 内部质量 6.7  表面质量 7  检验规则 7.1  检查和验收 7.2  组批 7.3  检验项目 7.4  取样 7.5  检验结果的判定 8  标志、包装、运输、贮存及随行文件 8.1  标志、包装、运输、贮存 8.2  随行文件 9  订货单内容

Extruded tubes of aluminum bronze for rail transit equipment

T/JXTX 0004-2023 轨道交通装备用铝青铜挤制棒

1  范围 本文件规定了轨道交通装备用铝青铜挤制棒的分类和标记、技术要求、试验方法、检验规则、标志、包装、运输、贮存及随行文件和订货单内容。 本文件适用于轨道交通装备用的圆形、正方形和正六角形铝青铜挤制棒(以下简称棒材)。 2  规范性引用文件 下列文件中的内容通过文中的规范性引用而构成本文件必不可少的条款。其中，注日期的引用文件，仅该日期对应的版本适用于本文件；不注日期的引用文件，其最新版本(包括所有的修改单)适用于本文件。 GB/T 231.1  金属材料 布氏硬度试验  第1部分：试验方法 GB/T 2423.17  电工电子产品基本环境试验规程—试验Ka：盐雾试验方法 GB/T 2828.1  计数抽样检验程序  第1部分：按接收质量限（AQL）检索的逐批检验抽样计划 GB/T 3310  铜及铜合金棒材超声波探伤方法 GB/T 5121 (所有部分)  铜及铜合金化学分析方法 GB/T 5231  加工铜及铜合金牌号和化学成分 GB/T 8170  数值修约规则与极限数值的表示和判定 GB/T 8653  金属材料杨氏模量、弦线模量和切线模量试验方法 GB/T 8888  重有色金属加工产品的包装、标志、运输、贮存和质量证明书 GB/T 12444  金属材料 磨损试验方法 试环-试块滑动磨损试验 GB/T 26303.2  铜及铜合金加工材外形尺寸检测方法 第2部分棒、线、型材 GB/T 34505—2017  铜及铜合金材料 室温拉伸试验方法 YS/T 336  铜、镍及其合金管材和棒材断口检验方法 YS/T 482  铜及铜合金光电直读光谱分析 YS/T 483  铜及铜合金分析方法X射线荧光光谱法(波长色散型) YS/T 649  铜及铜合金挤制棒 YS/T 668  铜及铜合金理化检测取样方法 YS/T 815  铜及铜合金力学性能和工艺性能试样的制备方法 3  术语和定义 本文件没有需要界定的术语和定义。 4  分类和标记 4.1  产品分类 4.2  产品标记 5  技术要求 5.1  化学成分 5.2  外形尺寸及其允许偏差 5.3  力学性能 5.4  耐磨损性能 5.5  耐腐蚀性能 5.6  内部质量 5.7  表面质量 6  试验方法 6.1  化学成分 6.2  外形尺寸及其允许偏差 6.3  力学性能 6.4  耐磨损性能 6.5  耐腐蚀性能 6.6  内部质量 6.7  表面质量 7  检验规则 7.1  检查和验收 7.2  组批 7.3  检验项目 7.4  取样 7.5  检验结果的判定 8  标志、包装、运输、贮存及随行文件 8.1  标志、包装、运输、贮存 8.2  随行文件 9  订货单内容

Extruded bars of aluminum bronze for rail transit equipment

T/CPCIF 0255-2023 锂电池废料回收利用产物 海绵铜

本文件规定了锂电池废料回收利用产物海绵铜的技术要求、试验方法、检验规则及标志和随行文件、包装、运输、贮存等内容。 本文件适用于锂离子电池废料湿法冶炼过程采用铁质原料经置换反应所得的海绵铜。

Recycling product of lithium battery waste—Sponge copper

ASTM B967/B967M-18(2023) 铜锌锡铋合金棒材、棒材和线材标准规范

1.1 This specification establishes the requirements for copper-zinc-tin-bismuth alloy rod, bar and wire of alloy UNS Nos. C49250, C49255, C49260, C49265, C49300, C49340, C49345, C49350, C49355, and C49360 intended for use in plumbing applications and drinking water systems. 1.2 Typically, rod and bar product made to this specification is furnished as straight lengths. Wire (H04) 0.08 in. to 0.3 in. [2 mm to 8 mm inclusive] is furnished in coil form, and H50 shapes. 1.3 Units—The values stated in either SI units or inchpound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard. 1.4 The following safety hazard caveat pertains only to the test method(s) described in this specification. 1.4.1 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Copper-Zinc-Tin-Bismuth Alloy Rod, Bar and Wire

ASTM B30-23 铸锭和其他重熔形式的铜合金标准规范

1.1 This specification covers the requirements for copper alloys in ingot and other forms including granules, nuggets, pellets, or shot for remelting for the manufacturing of castings having the Copper Alloy UNS No. designation, commercial designations and nominal composition shown in Table 1 and Table 2. Product delivered in forms other than ingot shall be upon agreement between the supplier and purchaser. 1.2 A cross reference of Copper Alloy UNS Nos. and copper alloy casting specifications is given in Table 3. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Copper Alloys in Ingot and Other Remelt Forms

ASTM B743-23 无缝铜管盘管标准规范

1.1 This specification establishes the requirements for seamless copper tube in coils, suitable for use in refrigeration and air conditioning or other uses, such as oil lines and gasoline lines. 1.2 Units—The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 The tube shall be produced of the following coppers: Copper Alloy UNS No. Previously Used Designation Type of Copper C10200 OF Oxygen-free without residual deoxidantsA C10300 ... Oxygen-free, extra low phosphorusA C10800 ... Oxygen-free, low phosphorusA C12000 DLP Phosphorized, low residual phosphorus C12200 DHP Phosphorized, high residual phosphorus A See Classification B224. 1.4 The following safety hazards caveat pertains to the test method portion, Section 17, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Seamless Copper Tube in Coils

ASTM B121/B121M-23 含铅黄铜板、薄板、带材和轧制棒材的标准规范

1.1 This specification establishes the requirements for leaded brass plate, sheet, strip, and rolled bar for general application produced from Copper Alloy UNS Nos. C33500, C34000, C34200, C35000, C35300, and C35600. 1.2 Units—The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Leaded Brass Plate, Sheet, Strip, and Rolled Bar

ASTM B929-23 铜镍锡Spinodal合金棒和棒材的标准规范

1.1 This specification covers the requirements for coppernickel-tin alloy UNS No. C72900 rod and bar. 1.2 Units—The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 The following safety hazard caveat pertains only to the test methods described in this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Copper-Nickel-Tin Spinodal Alloy Rod and Bar

T/CNIA 0190-2023 绿色设计产品评价技术规范 铜及铜合金直管材

本文件规定了铜及铜合金直管材绿色设计产品评价、评价要求、产品生命周期评价及报告、评价方法和流程。 本文件适用于铜及铜合金直管材绿色设计产品的评价。

Technical Specifications for Green Design Product Evaluation Copper and Copper Alloy Straight Pipes

T/CNIA 0202-2023 燃气采暖热水炉换热器用无缝异形铜管

本文件规定了燃气采暖热水炉换热器用无缝异形铜管的（以下简称管材）的分类和标记、技术要求、试验方法、检验规则、标志、包装、运输、贮存及随行文件和订货单内容。 本文件适用于家用热水器、燃气采暖热水炉行业用无缝异形铜管。

Seamless special-shaped copper tubes for gas heating water heater heat exchangers

T/CNIA 0185-2023 铜及铜合金加工产品制造生命周期评价技术规范 （产品种类规则）

本文件规定了铜及铜合金加工产品制造生命周期评价的产品描述、产品生命周期评价（LCA）、附加信息、支持Ⅲ型环境生命报告的要求。 本文件适用于具有全工序流程的铜及铜合金加工企业生产产品的生命周期评价，也适用于仅有某一个或部分工序的铜及铜合金加工企业生产产品的生命周期评价。

Technical Specifications for Manufacturing Life Cycle Assessment of Copper and Copper Alloy Processed Products (Product Category Rules)

T/CNIA 0189-2023 绿色设计产品评价技术规范 铜及铜合金盘管

本文件规定了铜及铜合金盘管材绿色设计产品评价的术语和定义、评价要求、生命周期评价及报告编制方法、评价方法和评价流程。 本文件适用于铜及铜合金盘管材绿色设计产品的评价。

Technical Specification for Green Design Product Evaluation Copper and Copper Alloy Coils

T/CNIA 0188-2023 绿色设计产品评价技术规范 铜及铜合金棒、型、线材

本文件规定了铜及铜合金棒、型、线材绿色设计产品评价的评价要求、产品生命周期评价与报告、评价方法和流程。 本文件适用于铜及铜合金棒、型、线材绿色设计产品的评价。

Technical Specifications for Green Design Product Evaluation Copper and Copper Alloy Rods, Shapes, and Wires

23/30452440 DC BS EN 1982 铜和铜合金 铸锭和铸件

BS EN 1982. Copper and copper alloys. Ingots and castings

KS D 6024-2022 铜和铜合金铸件

Copper and copper alloy castings

T/SDWCIA 0020-2022 质量分级及“领跑者”评价要求 电工用圆铜杆

4.2　评价指标分类 电工用圆铜杆质量分级及“领跑者”评价指标体系包括基础指标、核心指标和创新性指标。 基础指标包括化学成分、尺寸偏差、表面质量。 核心指标包括力学性能、扭转性能、电性能。核心指标分为三个等级，包括先进水平，相当于企标排行榜中5星级水平；平均水平，相当于企标排行榜中4星级水平；基准水平，相当于企标排行榜中3星级水平。

Quality Grading and "Linpaozhe" Evaluation Requirements for Electrician's Round Copper Rod

ASTM B441-22 铜钴铍合金、铜镍铍合金、镍铅铍合金和铜镍钴合金棒和棒的标准规范

1.1 This specification establishes the requirements for Copper Alloy UNS Nos. C17500, C17510, C17540, and C17465 rod and bar in straight lengths. 1.2 Units—The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units, which are provided for information only and are not considered standard. 1.3 The following safety hazard caveat pertains only to the test method(s) described in this specification. 1.3.1 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and to determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Copper-Cobalt-Beryllium Alloy, Copper-Nickel-Beryllium Alloy, Copper-Nickel-Lead-Beryllium Alloy, and Copper-Nickel-Cobalt Alloy Rod and Bar

T/CNIA 0158-2022 镁及镁合金加工行业绿色工厂评价导则

本文件规定了镁及镁合金加工行业绿色工厂评价的总则、评价要求、评价程序及评价报告等。 本文件适用于具有实际生产过程的镁及镁合金轧制、挤压、拉拔、锻压、铸造等加工行业工厂，并作为镁及镁合金加工行业创建绿色工厂的指导性文件和对镁及镁合金加工行业绿色工厂创建水平进行评价的具体要求。

Green factory evaluation guidelines for magnesium and magnesium alloy processing industry

ASTM B283/B283M-22 铜和铜合金模锻件（热压）的标准规范

1.1 This specification establishes the requirements for copper and copper alloy die forgings produced by the hot pressing method. The following copper and copper alloys are included: Copper or Copper Alloy UNS No. Name C11000 copper C14500 copper-tellurium C14700 copper-sulfur C27450 plumbing brass C27451 plumbing brass C27453 copper zinc alloy C28500 copper-zinc brass C35330 leaded brass C36300 copper-zinc-lead C36500 leaded Muntz metal C37000 free-cutting Muntz metal C37700 forging brass C46400 naval brass C46500 naval brass, arsenical C46750 tin brass C48200 medium leaded naval brass C48500 leaded naval brass C48600 naval brass C48640 DZR brass C48645 DZR tin brass C49250 copper-zinc-bismuth alloy C49255 copper-zinc-bismuth-nickel alloy C49260 copper-zinc-bismuth alloy C49265 copper-zinc-tin-bismuth, low leaded C49300 copper-zinc-tin-bismuth alloy C49340 copper-zinc-tin-bismuth alloy C49345 copper-zinc-tin-bismuth, low leaded C49350 copper-zinc-tin-bismuth alloy C49355 bismuth brass C61900 aluminum bronze C62300 aluminum bronze, 9 % C63000 aluminum-nickel bronze C63200 aluminum-nickel bronze C64200 aluminum-silicon bronze C64210 aluminum-silicon bronze, 6.7 % C65500 high-silicon bronze (A) C65680 high-silicon bronze C67500 manganese bronze (A) C67600 . . . C69300 copper-zinc-silicon C69410 copper-zinc-silicon Copper or Copper Alloy UNS No. Name C69850 copper-zinc-silicon C70620 copper-nickel 90-10 C71520 copper-nickel 70-30 C77400 nickel silver, 45-10 C87700 silicon bronze C87710 silicon bronze Copper Alloy EN 1412 Nos. Name CW612N forging brass CW617N forging brass 1.2 Units—The values stated in either SI units or inchpound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other and values from the two systems shall not be combined. NOTE 1—Nominal composition and relative forgeability ratings are given in Appendix X1. Copper-nickel alloys C70620 and C71520 are intended for welded applications with seawater exposure. NOTE 2—Guidelines for design and development of forgings are included in Appendix X2. NOTE 3—Wrought product intended for hot forging is described in Specification B124/B124M. 1.3 The following safety caveat pertains only to Section 10 of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)