77.150.50 钛产品 标准查询与下载

GB/T 20927-2007 钛及钛合金废料

本标准规定了钛材、钛制品及钛设备生产制造过程中产生的或废旧设备拆解的钛及钛合金废料的分类、要求、试验方法、检验规则、标志、包装、运输和贮存等。 本标准适用于作为再生原料的各种钛及钛合金废料。 本标准不适用于对环境和人体有危害的铁及钛合金废料。

Scraps of titanium and titanium alloy

GB/T 8546-2007 钛-不锈钢复合板

本标准规定了钛-不锈钢复合板产品的要求、试验方法、检验规则、标志、包装、运输、贮存及订货单内容等。 本标准适用于厚度不小于4mm的钛-不锈钢复合板。本产品用于有腐蚀环境中，承受一定压力、温度的压力容器、过渡接头及其它设备零部件等。

Titanium clad stainless steel plate

GB/T 8547-2006 钛-钢复合板

本标准规定了钛-钢复合板的产品分类、技术要求、试验方法、检验规则和标志、包装、运输、贮存及订单内容等。 本标准适用于耐蚀压力容器、贮藏及其他用途的钛-钢轧制复合板、钛-钢爆炸复合板或爆炸-轧制复合板。

Titanium clad steel plate

GB/T 2524-2002 海绵钛

本标准规定了海绵钛的要求、试验方法、检验规则及标志、包装、运输、贮存。本标准只适用于四氯化钛以镁还原蒸馏法(简称镁法)生产的海绵钛。

Sponge titanium

GB/T 2965-1996 钛及钛合金棒材

本标准规定了钛及钛合金棒材的分类、技术要术、试验方法、检验规则及标志、包装、运输、贮存。 本标准适用于锻造、挤压、轧制和冷拔的钛及钛合金圆棒和矩形棒。

Titanium and titanium alloy bars

GB/T 16598-1996 钛及钛合金饼和环

本标准规定了钛及钛合金饼、环和其他锻件（坯）的分类、技术要求、试验方法、检验规则及标志、包装、运输和贮存。 本标准适用于热锻和热轧的钛及钛合金饼、环和其他锻件（坯）。 本标准适用于一般工业用途的钛及钛合金锻（轧）件（坯）。

Titanium and titanium alloy disc and ring

ASTM B481-24 电镀用钛和钛合金制备的标准实施规程

Standard Practice for Preparation of Titanium and Titanium Alloys for Electroplating

ASTM B861-24 钛及钛合金无缝管标准规范

1.1  This specification covers the requirements for 34 grades of titanium and titanium alloy seamless pipe intended for general corrosion resisting and elevated temperature service as follows: 1.1.1  Grade 1— UNS R50250. Unalloyed titanium, 1.1.2  Grade 2— UNS R50400. Unalloyed titanium, 1.1.2.1  Grade 2H— UNS R50400. Unalloyed titanium (Grade 2 with 58 ksi (400 MPa) minimum UTS), 1.1.3  Grade 3— UNS R50550. Unalloyed titanium, 1.1.4  Grade 5— UNS R56400. Titanium alloy (6 % aluminum, 4 % vanadium), 1.1.5  Grade 7— UNS R52400. Unalloyed titanium plus 0.12 % to 0.25 % palladium, 1.1.5.1  Grade 7H— UNS R52400. Unalloyed titanium plus 0.12 % to 0.25 % palladium (Grade 7 with 58 ksi (400 MPa) minimum UTS), 1.1.6  Grade 9— UNS R56320. Titanium alloy (3 % aluminum, 2.5 % vanadium), 1.1.7  Grade 11— UNS R52250. Unalloyed titanium plus 0.12 % to 0.25 % palladium, 1.1.8  Grade 12— UNS R53400. Titanium alloy (0.3 % molybdenum, 0.8 % nickel), 1.1.9  Grade 13— UNS R53413. Titanium alloy (0.5 % nickel, 0.05 % ruthenium), 1.1.10  Grade 14— UNS R53414. Titanium alloy (0.5 % nickel, 0.05 % ruthenium), 1.1.11  Grade 15— UNS R53415. Titanium alloy (0.5 % nickel, 0.05 % ruthenium), 1.1.12  Grade 16— UNS R52402. Unalloyed titanium plus 0.04 % to 0.08 % palladium, 1.1.12.1  Grade 16H— UNS R52402. Unalloyed titanium plus 0.04 % to 0.08 % palladium (Grade 16 with 58 ksi (400 MPa) minimum UTS), 1.1.13  Grade 17— UNS R52252. Unalloyed titanium plus 0.04 % to 0.08 % palladium, 1.1.14  Grade 18— UNS R56322. Titanium alloy (3 % aluminum, 2.5 % vanadium plus 0.04 % to 0.08 % palladium), 1.1.15  Grade 19— UNS R58640. Titanium alloy (3 % aluminum, 8 % vanadium, 6 % chromium, 4 % zirconium, 4 % molybdenum), 1.1.16  Grade 20— UNS R58645. Titanium alloy (3 % aluminum, 8 % vanadium, 6 % chromium, 4 % zirconium, 4 % molybdenum) plus 0.04 % to 0.08 % palladium, 1.1.17  Grade 21— UNS R58210. Titanium alloy (15 % molybdenum, 3 % aluminum, 2.7 % niobium, 0.25 % silicon), 1.1.18  Grade 23— UNS R56407. Titanium alloy (6 % aluminum, 4 % vanadium, extra low interstitial, ELI), 1.1.19  Grade 24— UNS R56405. Titanium alloy (6 % aluminum, 4 % vanadium) plus 0.04 % to 0.08 % palladium, 1.1.20  Grade 25— UNS R56403. Titanium alloy (6 % aluminum, 4 % vanadium) plus 0.3 % to 0.8 % nickel and 0.04 % to 0.08 % palladium, 1.1.21  Grade 26— UNS R52404. Unalloyed titanium plus 0.08 % to 0.14 % ruthenium, 1.1.21.1  Grade 26H— UNS R52404. Unalloyed titanium plus 0.08 % to 0.14 % ruthenium (Grade 26 with 58 ksi (400 MPa) minimum UTS), 1.1.22  Grade 27— UNS R52254. Unalloyed titanium plus 0.08 % to 0.14 % ruthenium, 1.1.23  Grade 28— UNS R56323. Titanium alloy (3 % aluminum, 2.5 % vanadium plus 0.08 % to 0.14 % ruthenium), 1.1.24  Grade 29— UNS R56404. Titanium alloy (6 % aluminum, 4 % vanadium, extra low interstitial, ELI plus 0.08 % to 0.14 % ruthenium), 1.1.25  Grade 33— UNS R53442. Titanium alloy (0.4 % nickel, 0.015 % palladium, 0.025 % ruthenium, 0.15 % chromium), 1.1.26  Grade 34— UNS R53445. Titanium alloy (0.4 % nickel, 0.015 % palladium, 0.025 % ruthenium, 0.15 % chromium), 1.1.27  Grade 35— UNS R56340. Titanium alloy (4.5 % aluminum, 2 % molybdenum, 1.6 % vanadium, 0.5 % iron, 0.3 % silicon), 1.1.28  Grade 36— UNS R58450. Titanium alloy (45 % niobium), 1.1.29  Grade 37— UNS R52815. Titanium alloy (1.5 % aluminum), and 1.1.30  Grade 38— UNS R54250. Titanium alloy (4 % aluminum, 2.5 % vanadium, 1.5 % iron). Note 1:  H grade material is identical to the corresponding numeric grade (that is, Grade 2H = Grade 2) except for the higher guaranteed minimum UTS, and may always be certified as meeting the requirements of its corresponding numeric grade. Grades 2H, 7H, 16H, and 26H are intended primarily for pressure vessel use. 1.2  The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3  This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Titanium and Titanium Alloy Seamless Pipe

T/QGCML 3898-2024 热轧钛及钛合金无缝管材应用规范

本文件规定了热轧钛及钛合金无缝管材应用规范的术语和定义、管材分类与选用、管材质量要求、管材检验与验收、管材安装、管材维护与保养、安全事项与环保要求。 本文件适用于热轧钛及钛合金无缝管材的应用。

Application specifications for hot-rolled titanium and titanium alloy seamless pipes

ASTM B862-23 钛和钛合金焊接管的标准规范

Standard Specification for Titanium and Titanium Alloy Welded Pipe

ASTM B363-23 无缝和焊接非合金钛和钛合金焊接配件标准规范

Standard Specification for Seamless and Welded Unalloyed Titanium and Titanium Alloy Welding Fittings

ASTM B863-23 钛及钛合金线材标准规范

Standard Specification for Titanium and Titanium Alloy Wire

YS/T 1594-2023 锻造钛合金无缝管

Titanium alloy seamless tubes of forgings

T/CASME 362-2023 光学仪器用钛合金

本文件规定了光学仪器用钛合金的分类和标记、要求、试验方法、检验规则、标志、包装、运输、贮及质量证明书、合同（或订货单）内容。

Titanium alloys for optical instruments

ASTM B600-22 钛及钛合金表面的去垢和清洗

1.1 This guide covers a cleaning and descaling procedure useful to producers, users, and fabricators of titanium and titanium alloys for the removal of ordinary shop soils, oxides, and scales resulting from heat treatment operations and foreign substances present as surface contaminants. 1.2 It is not intended that these procedures be mandatory for removal of any of the indicated soils but rather serve as a guide when titanium and titanium alloys are being processed in the wrought, cast, or fabricated form. 1.3 It is the intent that these soils be removed prior to chemical milling, joining, plating, fabrication, and in any situation where foreign substances interfere with the corrosion resistance, stability, and quality of the finished product. 1.4 Acid etching may be required following cleaning when the surface has an oxygen-contaminated layer or alpha case present. 1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Descaling and Cleaning Titanium and Titanium Alloy Surfaces

YS/T 750-2022 热轧钛带卷

本文件适用于热轧方法生产的各种用途的钛带卷。

Hot rolled titanium strip coil

YS/T 1519-2022 钛及钛合金台阶轴锻件

本文件适用于热锻制造方法生产的石油行业用钛及钛合金台阶轴锻件

Titanium and titanium alloy stepped shaft forgings

YS/T 580-2022 制表用纯钛板材

本文件适用于轧制方法生产的制表用纯钛板材。

Pure titanium plate for watchmaking

YS/T 828-2022 阴极保护用钛阳极

本文件适用于土壤及淡水环境、大气环境中钢筋混凝土条件下，以氧化铱为涂层主体，以钛为基体的钛阳极产品。

Titanium anode for cathodic protection

YS/T 577-2022 钛及钛合金网篮

本文件适用于各种用途的钛及钛合金网篮。

Titanium and titanium alloy mesh baskets