77.150.50 钛产品 标准查询与下载

ASTM B265-15 钛和钛合金带材, 薄板和中厚板的标准规格

1.1 This specification2 covers annealed titanium and titanium alloy strip, sheet, and plate as follows: 1.1.1 Grade 1—UNS R50250. Unalloyed titanium, 1.1.2 Grade 2—UNS R50400. Unalloyed titanium, 1.1.2.1 Grade 2H—UNS R50400. Unalloyed titanium (Grade 2 with 58 ksi (400 MPa) minimum UTS), 1.1.3 Grade 3—UNS R50550. Unalloyed titanium, 1.1.4 Grade 4—UNS R50700. Unalloyed titanium, 1.1.5 Grade 5—UNS R56400. Titanium alloy (68201;% aluminum, 48201;% vanadium), 1.1.6 Grade 6—UNS R54520. Titanium alloy (58201;% aluminum, 2.58201;% tin), 1.1.7 Grade 7—UNS R52400. Unalloyed titanium plus 0.12 to 0.258201;% palladium, 1.1.7.1 Grade 7H—UNS R52400. Unalloyed titanium plus 0.12 to 0.258201;% palladium (Grade 7 with 58 ksi (400 MPa) minimum UTS), 1.1.8 Grade 9—UNS R56320. Titanium alloy (3.08201;% aluminum, 2.58201;% vanadium), 1.1.9 Grade 11—UNS R52250. Unalloyed titanium plus 0.12 to 0.258201;% palladium, 1.1.10 Grade 12—UNS R53400. Titanium alloy (0.38201;% molybdenum, 0.88201;% nickel), 1.1.11 Grade 13—UNS R53413. Titanium alloy (0.58201;% nickel, 0.058201;% ruthenium), 1.1.12 Grade 14—UNS R53414. Titanium alloy (0.58201;% nickel, 0.058201;% ruthenium), 1.1.13 Grade 15—UNS R53415. Titanium alloy (0.58201;% nickel, 0.058201;% ruthenium), 1.1.14 Grade 16—UNS R52402. Unalloyed titanium plus 0.04 to 0.088201;% palladium,

Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate

YST 994-2014 铸造用锌中间合金锭

Zinc master-alloy ingots for casting

YS/T 994-2014 铸造用锌中间合金锭

本标准规定了铸造用锌中间合金锭的要求、试验方法、检验规则及标志、包装、运输、贮存和质量证明书、合同(或订货单)。本标准适用于生产铸造用锌合金锭时配料、添加补料用的锌中间合金锭。

Zinc master-alloy ingots for casting

YS/T 971-2014 钛镍形状记忆合金丝材

本标准规定了钛镍形状记忆合金丝材(以下简称丝材)的术语、要求、试验方法、检验规则和标志、包装、运输、贮存及质量证明书与合同(或订货单)内容。本标准适用于制作眼镜架、口腔正畸丝、超弹性弹簧、温控元件等用冷加工态、热加工态、退火态和矫直态的丝材。

Titanium-nickel shape memory alloy wires

YS/T 993-2014 锌阳极泥

本标准规定了锌阳极泥的要求、试验方法、检验规则及包装、运输和质量预报单。本标准适用于湿法炼锌工艺电积时吸附在阳极上或沉于槽底的泥状物,主要成分为二氧化锰。

Zinc anode slime

ASTM B863-14 钛和钛合金线的标准规格

1.1 This specification covers titanium and titanium alloy wire as follows: 1.1.1 Grade 1—UNS R50250. Unalloyed titanium, 1.1.2 Grade 2—UNS R50400. Unalloyed titanium, 1.1.2.1 Grade 2H—UNS R50400. Unalloyed titanium (Grade 2 with 58 ksi (400 MPa) minimum UTS), 1.1.3 Grade 3—UNS R50550. Unalloyed titanium, 1.1.4 Grade 4—UNS R50700. Unalloyed titanium, 1.1.5 Grade 5—UNS R56400. Titanium alloy (68201;% aluminum, 48201;% vanadium), 1.1.6 Grade 6—UNS R54520. Titanium alloy (58201;% aluminum, 2.58201;% tin), 1.1.7 Grade 7—UNS R52400. Unalloyed titanium plus 0.12 to 0.258201;% palladium, 1.1.7.1 Grade 7H—UNS R52400. Unalloyed titanium plus 0.12 to 0.258201;% palladium (Grade 7 with 58 ksi (400 MPa) minimum UTS), 1.1.8 Grade 9—UNS R56320. Titanium alloy (38201;% aluminum, 2.58201;% vanadium), 1.1.9 Grade 11—UNS R52250. Unalloyed titanium plus 0.12 to 0.258201;% palladium, 1.1.10 Grade 12—UNS R53400. Titanium alloy (0.38201;% molybdenum, 0.88201;% nickel), 1.1.11 Grade 13—UNS R53413. Titanium alloy (0.58201;% nickel, 0.058201;% ruthenium), 1.1.12 Grade 14—UNS R53414. Titanium alloy (0.58201;% nickel, 0.058201;% ruthenium), 1.1.13 Grade 15—UNS R53415. Titanium alloy (0.58201;% nickel, 0.058201;% ruthenium), 1.1.14 Grade 16—UNS R52402. Unalloyed titanium plus 0.04 to 0.088201;% palladium, 1.1.14.1 Grade 16H—UNS R52402. Unalloyed tit......

Standard Specification for Titanium and Titanium Alloy Wire

ASTM B861-14 钛和钛合金无缝管的标准规格

1.1 This specification covers the requirements for 34 grades of titanium and titanium alloy seamless pipe intended for general corrosion resisting and elevated temperature service as follows: 1.1.1 Grade 1—UNS R50250. Unalloyed titanium, 1.1.2 Grade 2—UNS R50400. Unalloyed titanium, 1.1.2.1 Grade 2H—UNS R50400. Unalloyed titanium (Grade 2 with 58 ksi (400 MPa) minimum UTS), 1.1.3 Grade 3—UNS R50550. Unalloyed titanium, 1.1.4 Grade 5—UNS R56400. Titanium alloy (68201;% aluminum, 48201;% vanadium), 1.1.5 Grade 7—UNS R52400. Unalloyed titanium plus 0.12 to 0.258201;% palladium, 1.1.5.1 Grade 7H—UNS R52400. Unalloyed titanium plus 0.12 to 0.258201;% palladium (Grade 7 with 58 ksi (400 MPa) minimum UTS), 1.1.6 Grade 9—UNS R56320. Titanium alloy (38201;% aluminum, 2.58201;% vanadium), 1.1.7 Grade 11—UNS R52250. Unalloyed titanium plus 0.12 to 0.258201;% palladium, 1.1.8 Grade 12—UNS R53400. Titanium alloy (0.38201;% molybdenum, 0.88201;% nickel), 1.1.9 Grade 13—UNS R53413. Titanium alloy (0.58201;% nickel, 0.058201;% ruthenium), 1.1.10 Grade 14—UNS R53414. Titanium alloy (0.58201;% nickel, 0.058201;% ruthenium), 1.1.11 Grade 15—UNS R53415. Titanium alloy (0.58201;% nickel, 0.058201;% ruthenium), 1.1.12 Grade 16—UNS R52402. Unalloyed titanium plus 0.04 to 0.088201;% palladium, 1.1.12.1 Grade 16H—UNS R52402. Unalloyed titanium plus 0.04 to 0.088201;% palladium (Grade 16 with 58 ksi (400 MPa) minimum UTS), 1.1.13 Grade 17—UNS R52252. Unalloyed titanium plus 0.04 to 0.08......

Standard Specification for Titanium and Titanium Alloy Seamless Pipe

ASTM B862-14 钛和钛合金焊接管的标准规格

1.1 This specification covers the requirements for 33 grades of titanium and titanium alloy welded pipe intended for general corrosion resisting and elevated temperature service as follows: 1.1.1 Grade 1—UNS R50250. Unalloyed titanium, 1.1.2 Grade 2—UNS R50400. Unalloyed titanium, 1.1.2.1 Grade 2H—UNS R50400. Unalloyed titanium (Grade 2 with 58 ksi (400 MPa) minimum UTS), 1.1.3 Grade 3—UNS R50550. Unalloyed titanium, 1.1.4 Grade 5—UNS R56400. Titanium alloy (68201;% aluminum, 48201;% vanadium), 1.1.5 Grade 7—UNS R52400. Unalloyed titanium plus 0.12 to 0.258201;% palladium, 1.1.5.1 Grade 7H—UNS R52400. Unalloyed titanium plus 0.12 to 0.258201;% palladium (Grade 7 with 58 ksi (400 MPa) minimum UTS), 1.1.6 Grade 9—UNS R56320. Titanium alloy (38201;% aluminum, 2.58201;% vanadium), 1.1.7 Grade 11—UNS R52250. Unalloyed titanium plus 0.12 to 0.258201;% palladium, 1.1.8 Grade 12—UNS R53400. Titanium alloy (0.38201;% molybdenum, 0.88201;% nickel), 1.1.9 Grade 13—UNS R53413. Titanium alloy (0.58201;% nickel, 0.058201;% ruthenium), 1.1.10 Grade 14—UNS R53414. Titanium alloy (0.58201;% nickel, 0.058201;% ruthenium), 1.1.11 Grade 15—UNS R53415. Titanium alloy (0.58201;% nickel, 0.058201;% ruthenium), 1.1.12 Grade 16—UNS R52402. Unalloyed titanium plus 0.04 to 0.088201;% palladium, 1.1.12.1 Grade 16H—UNS R52402. Unalloyed titanium plus 0.04 to 0.088201;% palladium (Grade 16 with 58 ksi (400 MPa) minimum UTS), 1.1.13 Grade 17—UNS R52252. Unalloyed titanium plus 0.04 to 0.0882......

Standard Specification for Titanium and Titanium Alloy Welded Pipe

ASTM B481-68(2013) 电镀用钛和钛合金的制备

1.1 This practice describes processes that have been found to be successful in producing adherent electrodeposits of good quality on titanium and certain titanium alloys. Not all of the processes that have been reported as successful are described, but rather three basic ones that have had the widest use. A rather complete listing of the published work on electroplating on titanium is given in the list of references which appear at the end of this practice. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For a specific hazard statement, see 3.1.

Standard Practice for Preparation of Titanium and Titanium Alloys for Electroplating

YS/T 893-2013 电子薄膜用高纯钛溅射靶材

本标准规定了电子薄膜用高纯钛溅射靶材的要求、试验方法、检验规则和标志、包装、运输、贮存及质量证明与合同(订单)等内容。本标准适用于电子薄膜制造用的各类钛溅射靶材。

High-purity sputtering titanium target used in electronic film

YS/T 885-2013 钛及钛合金锻造板坯

本标准规定了钛及钛合金锻造板坯的要求、试验方法、检验规则、标志、包装、运输、贮存和质量证明书以及合同(或订货单)内容、本标准适用于加工钛及钛合金带、卷材用的锻造板坯、

Titanium and titanium alloy forging blank

YS/T 886-2013 纯钛型材

本标准规定了纯钛型材的要求、试验方法、检验规则、标志、包装、运输、贮存和质量证明书以及合同(或订单)内容、本标准适用于冷轧法生产的,用于制作眼镜框架部件的纯钛型材、

Unalloyed titanium profiles

YS/T 859-2013 直线型超弹性钛镍合金棒、丝材

本标准规定了直线型超弹性钛镍合金棒、丝材的要求、试验方法、检验规则、标志、包装、运输、贮存和质量证明书及合同(或订货单)内容、本标准适用于制作眼镜架、矫形丝、导引丝、通信天线等的直线型钛镍合金棒、丝材、

Linear and superelastic titanium nickel alloy bar and wire

DB52/T 795-2013 电子级高纯钛

Electronic grade high purity titanium

DB52/T 794-2013 航空航天用海绵钛

Titanium Sponge for Aerospace

ASTM B367-13(2017) 钛及钛合金铸件的标准规格

1.1 This specification covers titanium and titanium alloy castings intended for general corrosion resistant and industrial applications. as follows: 1.1.1 Grade C-2—UNS R52550. Unalloyed titanium, 1.1.2 Grade C-3—UNS R52550. Unalloyed titanium, 1.1.3 Grade C-5—UNS R56400. Titanium alloy (6 % aluminum, 4 % vanadium), 1.1.4 Grade C-7—UNS R52700. Unalloyed titanium plus 0.12 to 0.25 % palladium, 1.1.5 Grade C-8—UNS R52700. Unalloyed titanium plus 0.12 to 0.25 % palladium, 1.1.6 Grade C-9—UNS R56320. Titanium alloy (3 % aluminum, 2.5 % vanadium), 1.1.7 Grade C-12—UNS R53400. Titanium alloy (0.3 % molybdenum, 0.8 % nickel), 1.1.8 Grade C-16—UNS R52402. Unalloyed titanium plus 0.04 to 0.08 % palladium, 1.1.9 Grade C-17—UNS R52252. Unalloyed titanium plus 0.04 to 0.08 % palladium, and 1.1.10 Grade C-38—UNS R54250. Titanium alloy (4 % aluminum, 2.5 % vanadium, 1.5 % iron). 1.2 This specification is intended for use of purchasers and/or producers of reactive metal castings for defining the requirements and assuring the properties of castings for unique corrosion-resistant applications, that is, not for commodity items which must meet all potential purchasers’ requirements. 1.2.1 Users are advised to use the specification as a basis for obtaining castings which will meet minimum acceptance requirements established and revised by consensus of the members of the committee. 1.2.2 User requirements considered more stringent may be met by the addition to the purchase order of one or more supplementary requirements, which may include, but are not limited to, those listed in Sections S1 through S8. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This international standard was developed in accor

Standard Specification for Titanium and Titanium Alloy Castings

YS/T 824-2012 钛合金用铝锡中间合金

本标准规定了钛合金用铝锡中间合金的要求、试验方法、检验规则及标志、包装、运输、贮存、质量证明书和合同（或订货单）内容。 本标准适用于钛合金用铝锡中间合金。

Aluminum-tin masteralloy for titanium alloy

YS/T 795-2012 高尔夫球头用钛及钛合金板材

本标准规定了高尔夫球头用钛及钛合金板材的要求、试验方法、检验规则及标志、包装、运输、贮存、质量证明书和合同（或订货单）内容。 本标准适用于高尔夫球头用钛及钛合金板材。

Sheet of titanium and titanium alloy for golf head

YS/T 794-2012 钛种板

本标准规定了钛种板的要求、试验方法、检验规则及标志、包装、运输、贮存、质量证明书和合同（或订货单）内容。 本标准适用于湿法冶金种板用钛板。

Seed sheet of titanium

DIN 17864:2012 钛和可锻钛合金的铸件(自由锻造及模锻件).技术规范

Titanium and titanium wrought alloys forgings (hammer and drop forgings) - Technical specification