77.150.50 钛产品 标准查询与下载

AECMA PREN 3813-1999 航空航天系列钛合金 Ti-P64001用于锻造扣件的退火棒材和线材 De小于或等于2525mm.P1版

This draft is issued to allow comments from ~n~eres~paerdtie s; all comments will be given consideration prior to publication.

Aerospace Series Titanium Alloy Ti-P64001 Annealed Bar and Wire for Forged Fasteners De Less Than or Equal to 25 mm Edition P1

AECMA PREN 4173-1999 航空航天系列.公制系列钛合金TI-P64001 100度埋头钉紧公差剪式突头锁紧螺栓等级1 100 Mpa(室温)/315度℃.P1版

This "Aerospace Series" Prestandard has been drawn up under the responsibility of AECMA (The European Association of Aerospace Industries). it is published on green paper for the needs of AECMA-Members. It has been technically approved by the experts of the concerned Technical Committee following comment by the Member countries.

Aerospace Series Lockbolts, 100 Degree Countersunk Normal Head, Sheartype, Close Tolerance, in Titanium Alloy TI-P64001, Anodized, Metric Series Classification: 1 100 MPa (at Ambient Temperature)/ 315 Degrees Celsius Edition P 1

AECMA PREN 4072-1999 航空航天系列.铝 IVD涂层钛合金、100°埋头标准头偏十字凹槽紧公差普通柄短螺纹螺钉　等级:1100MPa(室温)/425℃

This "Aerospace Series" frestandard has been drawn up under the responsibility of AECMA (The European Association of Aerospace Industries). It is published on green paper for the needs of AECMA-Members. It has been technically approved by the experts of the concerned Technical Committee following comment by the Member countries.

Aerospace Series Screws, 100 Degrees Countersunk Normal Head, Offset Cruciform Recess, Close Tolerance Normal Shank, Short Thread, in Titanium Alloy, Aluminium IVD Coated Classification : 1 100 MPa (at Ambient Temperature)/425 Degrees C Edition P 2

AECMA PREN 4362-1999 航空系列 铆钉固态100度埋头钉钛合金44,5鈳公制系列.P2版

This standard specifies a method of testing for circumferential residual stress in circular non-welded tubes of outer diameter D≥18 mm in aluminium and aluminium alloys.

Aerospace Series Rivets, Solid, 100 Degree Countersunk Reduced Head, in Titanium Alloy Ti 44,5 Cb, Metric Series Edition P 2

AECMA PREN 3820-1999 航空航天系列.阳极氧化MoS2润滑的钛合金、 标准六角头松公差普通柄短螺纹螺栓 等级:1100 MPa(室温)/315℃.P1版

This "Aerospace Series" Prestandard has been drawn up under the responsibility of AECMA (The European Association of Aerospace Industries). it is published on green paper for the needs of AECMA-Members. It has been technically approved by the experts of the concerned Technical Committee following comment by the Member countries.

Aerospace Series Bolts, Normal Hexagonal Head, Coarse Tolerance Normal Shank, Short Thread, in Titanium Alloy, Anodized, MoS2 Lubicated Classification: 1 100 MPa (At Ambient Temperature)/315 Degrees C Edition P 2

AECMA PREN 4363-1999 航空系列 铆钉固态100度埋头钉钛合金44,5鈳铝涂层公制系列.P2版

This standard specifies a method of verifying the strength of the mounting elements of circuit breakers.It shall be used together with EN 3841-100.

Aerospace Series Rivets, Solid, 100 Degree Countersunk Reduced Head, in Titanium Alloy Ti 44,5 Cb, with Aluminium Pigmented Coating, Metric Series Edition P 2

AECMA PREN 4071-1999 航空航天系列正态六角头紧公差常态胫短丝钛合金和铝涂层规格 1100MPa(室温)/425℃

This “Aerospace Series” Prestandard has been drawn up under the responsibility of AECMA (The European Association of Aerospace Industries). It is published on green paper for the needs of AECMA-Members. It has been technically approved by the experts of the concerned Technical Committee following comment by the Member countries.

Aerospace Series Bolts, Normal Hexagonal Head, Close Tolerance Normal Shank, Short Thread, in Titanium Alloy, Aluminium IVD Coated Classification : 1 100 MPa (at Ambient Temperature)/425 Degrees C Edition P 2

JIS H 4607:1998 钛合金板

Sheets and plates of titanium alloys

JIS H 4657:1998 钛合金棒及锻件

Rods, bars and forgings of titanium alloys

AECMA PREN 4222-1998 航空宇宙抗热合金NI-PH1305(NiCr22Co13Mo9Al1)空气熔化和真空精致焖火薄片和带0,25mm小于或等于a小于或等于3mm.P1版

This "Aerospace Series" Prestandard ,,as been drawn up under the responsibility of AECMA-STAN (The European Association of Aerospace Industries - Standardization). It is published on green paper for the needs of the European Aerospace Industry. It has been technically approved by the experts of the concerned Domain following member comments.

Aerospace Series Heat Resisting Alloy NI-PH1305 (NiCr22Co13Mo9Al1) Air Melted and Vacuum Refined Annealed Sheet and Strip 0,25 mm Less Than or Equal to a Less Than or Equal to 3 mm Edition P 1

ASTM B367-93(1998) 钛和钛合金铸件的标准规范

Standard Specification for Titanium and Titanium Alloy Castings

AECMA PREN 4238-1998 航空系列 纤维加固修补术热物质机械.P1版

This standard defines a method of evaluating the influence of exposure to constant temperature, under dry atmospheric pressure conditions, and without mechanical loading, on the characteristic properties of fibre reinforced plastics for aerospace applications.

Aerospace Series Fibre Reinforced Plastics Determination of the Effect of Dry Heat on Physical and Mechanical Characteristics Edition P 1

AECMA PREN 4362-1998 航空系列 铆钉固态100度埋头钉钛合金44,5鈳公制系列.P1版

This standard specifies the characteristics of solid rivets, with 100° normal countersunk head with dome, corrosion resisting steel, passivated, for maximum operating temperature 700 ℃.

Aerospace Series Rivets, Solid, 100 Degree Countersunk Reduced Headin Titanium Alloy Ti 44,5 Cb, Metric Series Edition P 1

AECMA PREN 4363-1998 航空系列 铆钉固态100度埋头钉钛合金44,5鈳铝涂层公制系列.P1版

This standard specifies the characteristics of solid rivets, with 100°countersunk reduced head, in titanium alloy Ti 44,5 Cb, with aluminium pigmented coating, metric series, for maximum operating temperature 315℃.

Aerospace Series Rivets, Solid, 100 Degree Countersunk Reduced Head in Titanium Alloy Ti 44,5 Cb, with Aluminium Pigmented Coating, Metric Series Edition P 1

AECMA PREN 3725-1997 航空航天系列.MoS2涂覆的阳极化处理的钛合金

This "Aerospace Series" Prestandard has been drawn up under the responsibility of AECMA (The European Association of Aerospace Industries). It is published on green paper for the needs of AECMA-Members. It has been technically approved by the experts of the concerned Technical Committee following comment by the Member countries.

Aerospace Series Bolts, Pan Head, Six Lobe Recess, Normal Shank, Long Thread, in Titanium Alloy TI-P63, MoS2 Coated Classification: 1 100 MPa (at Ambient Temperature) Edition P 1

AECMA PREN 2340-1997 航空航天系列钛和钛合金片加热压光棍厚度12mm小于或等于直径D小于或等于80mm.第1版

This standard is initially published on green paper for the needs of AECMA-Members (Association Européenne des Constructeurs de Matériel Aérospatial). It has been technically approved by the experts of the concerned AECMA Commission following comment by the manufacturers of the Member countries.

Round Bars Titanium and Titanium Alloys Diameter 12 mm Less than or Equal to D Less than or Equal to 80 mm Dimensions Aerospace Series Edition 2; PREN 4267

AECMA PREN 4267-1996 航空系列 圆杆钛和钛合金6mm小于或等于直径D小于或等于160mm 直径尺寸.P1版

This standard specifies an anaerobic polymerisable compound which polymerises upon the exclusion of oxygen and activation by oxygen and activation by a metal surface with a torque strength of 5 Nm and a viscosity of 500 mm2s-1.

Aerospace Series Round Bar in Titanium and Titanium Alloys Diameter 6 mm Less Than or Equal to D Less Than or Equal to 160 mm Dimensions Edition P 1

AECMA PREN 3683-1996 航空航天系列.钛合金锻件产品原始阿尔法粒子测试粒子线性截取

This "Aerospace Series" Prestandard has been drawn up under the responsibility of AECMA (The European Association of Aerospace Industries). It is published on green paper for the needs of AECMA-Members. It has been technically approved by the experts of the concerned Technical Committee following comment by the Member countries.

Aerospace Series Test Methods Titanium Alloy Wrought Products Determination of Primary Alpha Particle Content Point Count Method and Line Intercept Method Edition P 1

AECMA PREN 3684-1996 航空航天系列.钛合金锻件产品BETA射线金相学温度测试

This standard specifies a method of assessing the ability of a mated pair of optical connection elements and fibre optic couplers to withstand transverse loads without mechanical or optical damage.

Aerospace Series Test Methods Titanium Alloy Wrought Products Determination of Beta Ray Transus Temperature Metallographic Method Edition P 1

AECMA PREN 4222-1996 航空宇宙抗热合金NI-PH13XX(NiCr22Co13Mo9Al1)空气熔化和真空精致焖火薄片和带0,25mm小于或等于a小于或等于3mm.P1版

This draft is now available for public comment and your views and technical comments on it would be appreciated. If you have no specific comments to make but find it generally acceptable it would be helpful if you would noti@ us accordingly. Suggestions entailing revision of the text should indicate the preferred wording.

Aerospace Series Heat Resisting Alloy NI-PH13XX (NiCr22Co13Mo9Al1) Air Melted and Vacuum Refined Annealed Sheet and Strip 0,25 mm Less Than or Equal to a Less Than or Equal to 3 mm Edition P1