79.040 木材、原木和锯材 标准查询与下载

GSO ISO 2301:2016 阔叶树种锯材 缺陷 测量

1.1 This International Standard specifies international methods of measuring defects of sawn timber of broadleaved species, classified in ISO 2299, Sawn timber of broadleaved species—Defects—Classification. 1.2 This International Standard covers unplaned sawn timber and sawn timber surfaced to size or planed but without profiling.

Sawn timber of broadleaved species -- Defects -- Measurement

DIN EN 384:2016 木材结构.机械性能和密度特征值的测定.德文版本EN 384-2016

Structural timber - Determination of characteristic values of mechanical properties and density; German version EN 384:2016

DIN EN 350:2016 木材和木基产品的耐久性 木材和木基材料对生物制剂耐久性的测试和分类；德文版 EN 350:2016

Durability of wood and wood-based products - Testing and classification of the durability to biological agents of wood and wood-based materials; German version EN 350:2016

KS F 2202-2016 木材年轮平均宽度的测定

Determination of average width of annual rings for wood

KS F 2201-2016 木材测试的一般要求

General requirements for testing of wood

KS F 9008-2016 胶合层压木构件之间连接结构的标准实施规程

Standard practice for construction of connections between glued-laminated timber members

KS F 2199-2016 木材含水率的测定

Determination of moisture content of wood

ISO 13061-14:2016 木材的物理和机械性能. 洁净木材小样品试验方法. 第14部分: 测定体积收缩

Physical and mechanical properties of wood - Test methods for small clear wood specimens - Part 14: Determination of volumetric shrinkage

BS EN 350:2016 实木的天然耐久性-木材和木质材料生物制剂耐久性试验与分级

Durability of wood and wood-based products. Testing and classification of the durability to biological agents of wood and wood-based materials

BS EN 384:2016 结构木材.机械性能和密度的特征值测定

Structural timber. Determination of characteristic values of mechanical properties and density

ISO 13061-13:2016 木材的物理和机械性能.透明小木材试样的试验方法.第13部分：径向和切向收缩的测定

This document specifies a method for the determination of linear shrinkage in the radial and tangential directions ofwood.

Physical and mechanical properties of wood - Test methods for small clear wood specimens- Part 13:Determination of radial and tangential shrinkage

DIN EN 16737:2016 结构木材. 热带硬木的外观强度分级; 德文版本EN 16737-2016

Structural timber - Visual strength grading of tropical hardwood; German version EN 16737:2016

DB46/T 396-2016 土沉香整树结香技术规程

适用于沉香生产

Technical Regulations for Agarwood Agarwood Whole Tree

EN 384:2016 结构木材.机械性能和密度的特征值的测定

This European Standard gives a method for determining characteristic values of mechanical properties and density, for defined populations of visual grades and/or strength classes of machine graded structural timber. Additionally it covers the stages of sampling, testing, analysis and presentation of the data. The standard provides methods to derive strength, stiffness and density properties for structural timber from tests with defect-free specimen. The values determined in accordance with this standard for mechanical properties and density are suitable for assigning grades and species to the strength classes of EN 338. NOTE 1 For assigning grades and species to the strength classes in EN 338 only three properties, i.e. bending or tension strength, modulus of elasticity parallel to grain in bending or tension and density need to be determined from test data, other properties can be calculated according to Table 2. NOTE 2 EN 1912 gives examples of established visual grades assigned to strength classes.

Structural timber - Determination of characteristic values of mechanical properties and density

EN 350:2016 实木的天然耐久性-木材和木质材料生物制剂耐久性试验与分级

This European Standard gives guidance on methods for determining and classifying the durability of wood and wood-based materials against biological wood-destroying agents. The methods can be applied either to individual wood species, batches of wood and processed wood-based materials, including heat-treated, preservative-treated wood and modified wood. However, this standard is not intended to replace testing of the efficacy of biocides. The wood-destroying agents considered in this standard are: - wood-decay fungi (basidiomycete and soft-rot fungi); - beetles capable of attacking dry wood; - termites; - marine organisms capable of attacking wood in service. Data on the biological durability of selected wood species considered of economic importance in European countries are presented in Annex B (informative), which also provides information relating to their geographical origin, density, sapwood width and treatability. NOTE Treatability, durability to disfiguring fungi, permeability to water and performance in use of wood and wood-based materials are also important issues. However, because standardized methods aiming to assess and classify these factors do not exist and/or have not been extensively experienced yet, preliminary guidance is given in Annex C (informative) for the classification of wood treatability with aqueous wood preservatives, Annex D (informative) for the classification of the permeability to water, Annex E (informative) for the durability to disfiguring fungi, and Annex F (informative) for the classification of performance.

Durability of wood and woodbased products - Testing and classification of the durability to biological agents of wood and wood-based materials

BS EN 16737:2016 结构木材. 热带硬木的外观强度分级

Structural timber. Visual strength grading of tropical hardwood

LY/T 2722-2016 指接材用结构胶黏剂胶合性能测试方法

Test method for bonding performance of structural adhesives for finger-jointed materials

DIN 68201:2016 木材切削加工废屑.术语、定义和数学计算方法

Cutting waste of wood - Terms and definitions and mathematical calculation methods

DIN EN 338:2016 支撑用建筑木材.强度等级.德文版本EN 338-2016

Structural timber - Strength classes; German version EN 338:2016

BS EN 338:2016 结构木材 力量课程

Structural timber. Strength classes