79.060.10 胶合板 标准查询与下载

LY/T 2385-2014 预油漆装饰单板

本标准规定了预油漆装饰单板(薄木)的术语和定义、分类、要求、试验方法、检验规则以及标志、包装、运输和贮存等。本标准适用于预油漆装饰单板(薄木)。

Pre-painted decorative veneer

DB34/T 2081-2014 胶合板（无甲醛胶粘剂型）

本标准规定了胶合板（无甲醛胶粘剂型）的分类、技术要求、试验方法、检验规则以及标志、标签和包装。 本标准适用于以原木的木质单板为原料，以不含甲醛的化工材料（如热塑性树脂等）或生物质材料（如植物或动物蛋白、淀粉等）以及其他不含甲醛化工材料（如醋酸乙烯等）为胶粘剂，按胶合板生产工艺加工出的胶合板产品。该类胶合板在使用过程中不会释放甲醛，是一种对环境安全的胶合板，也适用于以此种胶合板为基材的实木复合地板、门、家具等产品。

Plywood (formaldehyde-free adhesive type)

ISO 13608:2014 胶合板.装饰贴面胶合板

This International Standard specifies the terms, classifications, requirements, test methods, marking, for decorative veneered plywood with natural wood veneer, coloured veneer, laminated veneer, multilaminar veneer, and other types of veneer as decorative surface and plywood as a core panel, where the surface veneer thickness is less than 0,55 mm.

Plywood - Decorative veneered plywood

ISO 1096:2014 胶合板. 分类

This International Standard provides systems of classification of plywood panels based on general appearance and principal characteristics.

Plywood - Classification

ASTM D3500-14 胶合板抗拉结构的标准试验方法

3.1 These test methods determine the tensile properties of structural panels in response to stresses acting in the plane of the panel. 3.2 Test Method A—This test method is suited to material that is uniform with respect to tensile properties. It is normally applied to structural panels and plywood of clear, straight-grained veneers. It may also be used to evaluate the strength of scarf and finger joints and other manufacturing process variables that can be expected to influence the tensile properties of structural panels in a uniform manner across the width of the sheet. 3.3 Test Method B—This test method employs large test specimens and responds well to all manufacturing variables and growth characteristics that affect the tensile properties of structural panels. 3.4 It is recommended that where comparisons are to be made that the same test method and specimen size be used throughout. This is because the volume of material included in a test specimen can influence the tensile strength regardless of whether the material properties are uniform throughout the sheet or vary widely due to the presence of growth or manufacturing features. 1.1 These test methods cover the determination of the tensile properties of structural panels. 1.2 Structural panels in use include plywood, oriented strand board and composites of veneer, and other wood-based layers 1.3 Test Method A, Tensile Test for Small Specimens:  1.3.1 This test method employs small specimens that should have a reduced cross section at the center of their length to avoid failure in the grip area. The transition from full width of specimen to reduced section at the center should be gradual to minimize stress concentration. 1.3.2 When the measurements of elastic properties are to be made, the length of the reduced cross section at the center should be of sufficient length to accommodate an extensometer. 1.4 Test Method B, Tensile Test for Large Specimens:  1.4.1 This test method employs large specimens and responds well to manufacturing variables, panel grade characteristics, and other variables influencing the tensile properties of structural panels. 1.4.2 The test specimens are large enough to contain the maximum sized grade characteristics found in panels. The test specimens have a constant cross section since the size and location of grade characteristics control the location of failures and the effect of stress concentration at the grips is overshadowed. 1.4.3 This test method is recommended for the followin......

Standard Test Methods for Structural Panels in Tension

GOST 33065-2014 卡车, 汽车, 集装箱建筑用胶合板. 规格

Plywood for truck, car, container building. Specifications

GOST 11539-2014 电木胶合板. 规格

Bakelized plywood. Specifications

GSO ISO 12466-2:2013 胶合板 粘合质量 第2部分：要求

This part of ISO 12466 specifies requirements for determination of bonding quality class of plywood, blockboard, battenboard, and laminboard, bonded with thermosetting resins, according to their intended end uses. NOTE Appropriate test methods are specified in ISO 12466-1.

Plywood -- Bonding quality -- Part 2: Requirements

GSO ISO 12466-1:2013 胶合板 粘合剂质量 第1部分：测试方法

This part of ISO 12466 specifies methods for determining the bonding quality of plywood, blockboard, battenboard, and laminboard, bonded with thermosetting resin, by shear testing. NOTE If it is possible to demonstrate a correlation between the methods defined in this part of ISO 12466 and other methods, these may be used

Plywood -- Bonding quality -- Part 1: Test methods

KS W 1111-2013 飞机用胶合板

PLYWOODS FOR AIRCRAFT

ISO 1954:2013 胶合板.尺寸规格和公差

This International Standard specifies dimensional tolerances of plywood panels (length, width,thickness) and tolerances for edge straightness and squareness.

Plywood.Tolerances on dimensions

LY/T 1170-2013 茶叶包装箱用胶合板

本标准规定了茶叶包装箱用胶合板的要求、检验方法、检验规则及标志、包装、贮存和运输。本标准适用于不直接接触茶叶的包装箱用胶合板。

Plywood for tea packaging container

ISO 12466-1:2007/Amd 1:2013 胶合板.胶合质量.第1部分:试验方法.修改件1

Plywood - Bonding quality - Part 1: Test methods; Amendment 1

DB50/T 496-2013 细木芯板

本标准适用于实心细木芯板

Blockboard

GSO ISO 1096:2013 胶合板分类

This International Standard gives a classification of plywood panels.

Plywood -- Classification

BS EN 636:2012 胶合板.规格

Plywood. Specifications

BS EN 636:2012+A1:2015 胶合板 规格

What is BS EN 636 – Specification of plywood about? BS EN 636 specifies the requirements for plywood, as defined in BS EN 313-2 , for both general purpose use (non-structural application) and structural application in dry, humid or exterior conditions. BS EN 636 also gives a classification system based on the bending properties. The aim of BS EN 636 is to classify and determine the properties of plywood. BS EN 636 can be appropriately applied for all plywood, including overlaid and coated plywood, but it does not cover materials or processes used for overlaying or coating. Neither does it cover any materials or processes applied in relation to the enhancement of biological durability. Who is BS EN 636 - Specification of plywood for ? BS EN 636 on plywood is useful for:

Plywood. Specifications

12/30257543 DC BS ISO 1954 胶合板 尺寸公差

BS ISO 1954. Plywood. Tolerances on dimensions

CSA O153-13:2013 杨木胶合板

Scope 1.1 This Standard applies to exterior bond, all-veneer plywood with a minimum of three plies and parallel grain direction of the face and back plies. 1.2 This Standard specifies requirements for a) a quality system; b) materials; c) panel construction; d) bonding; e) veneer and panel grades; f) dimensions and tolerances; g) marking; and h) testing. 1.3 In this Standard, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; "may" is used to express an option or that which is permissible within the limits of the standard; and "can" is used to express possibility or capability. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.

Poplar plywood

CSA O153-F13:2013 杨木胶合板

Domaine d'application 1.1 Cette norme s'applique au contreplaqué à collage pour l'extérieur qui comporte au moins trois plis et dont la direction du fil est parallèle à celle du parement et du contreparement. 1.2 Cette norme prescrit les exigences relatives aux éléments suivants : a) un système qualité ; b) les matériaux ; c) la construction des panneaux ; d) l'adhérence ; e) les qualités de placage et de panneaux ; f) les dimensions et les tolérances ; g) le marquage ; et h) les essais. 1.3 Dans cette norme, le terme «doit» indique une exigence, c'est-à-dire une prescription que l'utilisateur doit respecter pour assurer la conformité à la norme ; «devrait» indique une recommandation ou ce qu'il est conseillé mais non obligatoire de faire ; et «peut» indique une possibilité ou ce qu'il est permis de faire. Les notes qui accompagnent les articles ne comprennent pas de prescriptions ni de recommandations. Elles servent àséparer du texte les explications ou les renseignements qui ne font pas proprement partie de la norme. Les notes au bas des figures et des tableaux font partie de ceux-ci et peuvent être rédigées comme des prescriptions. Les annexes sont qualifiées de normatives (obligatoires) ou d'informatives (facultatives) pour en préciser l'application.

Poplar plywood