79.060.20 纤维和刨花板 标准查询与下载

BS EN 320:2011 木屑板和纤维板.抗螺钉轴向拔出力的测定

This European Standard specifies a method for the determination of the resistance of fibreboards and particleboards to axial withdrawal of screws.

Particleboards and fibreboards. Determination of resistance to axial withdrawal of screws

DS/EN 320:2011 刨花板和纤维板 螺钉轴向退出阻力的测定

This European Standard specifies a method for the determination of the resistance of fibreboards and particleboards to axial withdrawal of screws.

Particleboards and fibreboards - Determination of resistance to axial withdrawal of screws

NF B51-128*NF EN 320:2011 刨花板和纤维板.螺丝抗轴向抽出的测定.

Particleboards and fibreboards - Determination of resistance to axial withdrawal of screws.

DIN EN 320:2011 塑合板和纤维板.抗螺钉轴向拔出力的测定;德文版本EN 320-2011

This European Standard specifies a method for the determination of the resistance of fibreboards and particleboards to axial withdrawal of screws.

Particleboards and fibreboards - Determination of resistance to axial withdrawal of screws; German version EN 320:2011

LY/T 1611-2011 地板基材用纤维板

本标准规定了地板基材用纤维板的术语和定义、分类、要求、试验方法、检验规则以及标志、包装、运输和贮存等。 本标准适用于各种地板基材用纤维板。

Fiberboard for flooring

LY/T 1598-2011 石膏刨花板

本标准规定了石膏刨花板的术语和定义、要求及统计计算、测量及试验方法、检验规则以及标志、包装、运输和贮存等。 本标准适用于石膏刨花板。

Gypsum particleboard

LY/T 1979-2011 刨花板生产节材和减排技术规范

本标准规定了刨花板生产节材和减排的术语和定义、基本原则、要求、节材和减排的主要措施、数据采集和计算方法。 本标准适用于普通刨花板。 本标准不适用于定向刨花板、石膏刨花板、水泥刨花板等。

Technical specification of raw materials saving and pollutants discharge reduction in particleboard production

EN 320:2011 纤维板.螺钉轴向拔出力测定

This European Standard specifies a method for the determination of the resistance of fibreboards and particleboards to axial withdrawal of screws.

Particleboards and fibreboards - Determination of resistance to axial withdrawal of screws

ANSI/APA PRR-410-2011 性能额定工程木缘板标准

Provides dimensions and tolerances, performance requirements, test methods, quality assurance, and trademarking for engineered wood rim boards.

Standard for Performance-Rated Engineered Wood Rim Boards

GOST R 54333-2011 碎料板及纤维板.垂直于板平面抗张强度的测定

Particle and fibre boards. Method for determination of tensile strength perpendicular to the plane of the panel

LST EN 312-2010 刨花板 规格

Particleboards - Specifications

DIN EN 312:2010 塑合板.规范;德文版本EN 312-2010

Particleboards - Specifications; German version EN 312:2010

BS EN 312:2010 刨花板.规范

This European Standard specifies the requirements for flat-pressed or calendar-pressed unfaced particleboards as defined in EN 309. NOTE 1 This standard is called up in EN 13986 for construction applications. Products specified in this standard are referred to in EN 13986 as resin-bonded particleboards. The values listed in this standard relate to product properties, but they are not characteristic values to be used in design calculations. NOTE 2 Such characteristic values (e.g. for use in design calculation in EN 1995-1-1) are given either in EN 12369-1 or derived by testing according to EN 789, EN 1058 and ENV 1156. Additional information on supplementary properties for certain applications is also given. NOTE 3 Particleboards in accordance with this standard may be referred to as P1 to P7-boards. Boards of type P4 to P7 are intended for use in design and construction of load-bearing or stiffening building elements, e.g. walls, flooring, roofing and I-beams (see EN 1995-1-1 and/or performance standards). This standard does not apply to extruded particleboards and flaxboards, which are standardised in EN 14755 and EN 15197 respectively.

Particleboards. Specifications

DS/EN 312:2010 刨花板 规格

This European Standard specifies the requirements for flat-pressed or calendar-pressed unfaced particleboards as defined in EN 309.NOTE 1 This standard is called up in EN 13986 for construction applications. Products specified in this standard are referred to in EN 13986 as resin-bonded particleboards.The values listed in this standard relate to product properties, but they are not characteristic values to be used in design calculations.NOTE 2 Such characteristic values (e.g. for use in design calculation in EN 1995-1-1) are given either in EN 12369-1 or derived by testing according to EN 789, EN 1058 and ENV 1156.Additional information on supplementary pro

Particleboards - Specifications

ISO 16893-2:2010 木基板材.刨花板.第2部分:要求

This part of ISO 16893 provides the manufacturing property requirements for uncoated particleboard. The values listed in this part of ISO 16893 relate to product properties used to classify particleboards into one of four types, P-GP, P-FN, P-LB or P-HLB (see Clause 3), for use in three service conditions, REG, MR and HMR. The values are not characteristic values to be used for design purposes.

Wood-based panels - Particleboard - Part 2: Requirements

ISO 16895-2:2010 木基板材.刨花板.第2部分:要求

This part of ISO 16895 provides the manufacturing property requirements for uncoated dry-process fibreboard. The values listed in this part of ISO 16895 relate to product properties used to classify fibreboards into one of four types, UDF, LDF, MDF and HDF (see Clause 3), for use in one of four service conditions, REG, MR, HMR and EXT. The values are not characteristic values to be used for design purposes.

Wood-based panels - Dry-process fibreboard - Part 2: Requirements

EN 312:2010 木屑板.规范

This European Standard specifies the requirements for flat-pressed or calendar-pressed unfaced particleboards as defined in EN 309. NOTE 1This standard is called up in EN 13986 for construction applications. Products specified inThis standard are referred to in EN 13986 as resin-bonded particleboards. The values listed inThis standard relate to product properties, but they are not characteristic values to be used in design calculations. NOTE 2 Such characteristic values (e. g. for use in design calculation in EN 1995-1-1) are given either in EN 12369-1 or derived by testing according to EN 789, EN 1058 and ENV 1156. Additional information on supplementary properties for certain applications is also given. NOTE 3 Particleboards in accordance withThis standard may be referred to as P1 to P7-boards. Boards of type P4 to P7 are intended for use in design and construction of load-bearing or stiffening building elements, e. g. walls, flooring, roofing and I-beams (see EN 1995-1-1 and/or performance standards).This standard does not apply to extruded particleboards and flaxboards, which are standardised in EN 14755 and EN 15197 respectively.

Particleboards - Specifications

BS EN 622-4:2009 纤维板.规范.软质纤维板的要求

This European Standard specifies the requirements for softboards as defined in EN 316, with a density ≥ 230 kg/m3 to 400 kg/m3. The values listed in this European Standard relate to product properties but they are not characteristic values to be used in design calculations.

Fibreboards - Specifications - Requirements for softboards

BS EN 622-5:2009 纤维板.规范.干燥处理板（MDF）的要求

This European Standard specifies the requirements for dry process boards (MDF) as defined in EN 316. The values listed in this European Standard relate to product properties but they are not characteristic values to be used in design calculations.

Fibreboards - Specifications - Requirements for dry process boards (MDF)

BS EN 622-4:2010 纤维板 规范 软质纤维板的要求

Fibreboards. Specifications. Requirements for softboards