81.040.10 原材料和未加工的玻璃 标准查询与下载

GB/T 32561.2-2016 红外光学硫系玻璃测试方法 第2部分:条纹度

GB/T 32561的本部分规定了红外光学硫系玻璃条纹测试原理及仪器和设备、测试条件、试样、测试程序、数据处理和测试报告。 本部分适用于红外光学硫系玻璃条纹的检测，也适用于其他红外光学玻璃条纹的检测。

Measuring method for chalcogenide infrared optical glass.Part 2:Degree of striae

GB/T 32561.3-2016 红外光学硫系玻璃测试方法 第3部分:杂质

GB/T 32561的本部分规定了红外光学硫系玻璃杂质测试原理及仪器和设备、测试条件、试样、测试程序、数据处理和测试报告。 本部分适用于红外光学硫系玻璃杂质的检测，也适用于其他红外光学玻璃、红外晶体、红外陶瓷等红外光学材料杂质的检测。

Measuring method for chalcogenide infrared optical glass.Part 3:Impurity

GB/T 31544-2015 玻璃材料高温弹性性能试验方法 脉冲激振法

本标准规定了利用脉冲激振法测定玻璃材料在高温环境下弹性模量、剪切模量和泊松比等弹性性能的术语和定义、方法概述、测试系统、试样、测试步骤、计算公式和试验报告。 本标准适用于连续均质的玻璃材料，既可测量某一给定温度点，也可连续测量不同温度点玻璃材料弹性性能。其他连续均质固体材料可参考使用。

Test method for elastic properties of glass at high temperatures.Impulse excitation of vibration

GB/T 30447-2013 纳米薄膜接触角测量方法

本标准规定了纳米薄膜接触角测量中涉及的术语、原理、试验设备、环境、样品制备、分析步骤、结果计算和试验报告等。本标准适用于衬底为表面平整的纳米薄膜涂层。

Measurement method for contact angle of nano-film surface

GB/T 30452-2013 光催化纳米材料光解指数测试方法

本标准规定了光催化纳米材料光解指数测试涉及的术话和定义、测试的原理、测试环境、测试装置及步骤、光解指数计算以及试验报告等a 本标准适用于评价板片状材料表面的光催化性能〉即光解指数碘u表面涂〈镀)光催化剂的玻璃、陶瓷等。

Measurement method for photolysis performance index of photocatalytic nano-materials

GB/T 30020-2013 玻璃缺陷检测方法 光弹扫描法

本标准规定了光弹扫描法检测玻璃缺陷的术语和定义、试验原理、试验装置、试验步骤、试验记录和试验报告。本标准适用于透明平板玻璃、银化玻璃。本标准既可用于服役中的玻璃缺陷检测,也可以用于出厂前玻璃缺陷的检测。本标准不适用于压花、夹层和镀膜玻璃。

Test method for the defects of glass.Photoelastic scanning method

GB/T 17470-1998 玻璃纤维短切原丝毡

本标准规定了玻璃纤维短切原丝毡（以下简称短切毡）的产品分类、技术要求、试验方法、检验规则、包装、标志、运输及贮存等。 本标准适用于连续玻璃纤维原丝或无捻粗纱经短切分散并施加化学粘结剂而制成的毡状制品。不适用于其他类型的玻璃纤细毡。

Glass fiber chopped strand mat

GB/T 17340-1998 汽车安全玻璃的尺寸、形状及外观

本标准规定了汽车用安全玻璃的尺寸、形状及外观，适用于汽车用安全玻璃，也适用于其他道路车辆用安全玻璃。

Road vehicles--Safety glasses--Dimensions, shapes and appearances

GB/T 9963-1998 钢化玻璃

本标准规定了钢化玻璃的分类、技术要求、检验方法和检验规则。适用于建筑、工业装备等建筑以外用钢化玻璃。

Tempered glass

T/CASME 1402-2024 手机盖板玻璃外观缺陷检测设备

本文件规定了手机盖板玻璃外观缺陷检测设备的技术要求、试验方法、检验规则、标志、包装、运输、贮存。

Mobile phone cover glass appearance defect detection equipment

ASTM C158-23 玻璃弯曲强度的标准试验方法（断裂模量的测定）

Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)

KS B ISO 12123-2023 光学和光子学光学玻璃原料规范

Optics and photonics — Specification of raw optical glass

BS ISO 8424:2023 光学玻璃原料 抵抗酸性水溶液的侵蚀 测试方法及分类

Raw optical glass. Resistance to attack by aqueous acidic solutions. Test method and classification

ASTM E1640-23 用动态力学分析法测定玻璃化转变温度的标准试验方法

1.1 This test method covers the assignment of a glass transition temperature (Tg) of materials using dynamic mechanical analyzers. 1.2 This test method is applicable to thermoplastic polymers, thermoset polymers, and partially crystalline materials which are thermally stable in the glass transition region. 1.3 The applicable range of temperatures for this test method is dependent upon the instrumentation used, but, in order to encompass all materials, the minimum temperature should be about −150 °C. 1.4 This test method is intended for materials having an elastic modulus in the range of 0.5 MPa to 100 GPa. 1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis

ISO 8424:2023 光学玻璃原料 耐酸性水溶液侵蚀 试验方法和分类

Raw optical glass — Resistance to attack by aqueous acidic solutions — Test method and classification

ASTM C965-23 软化点以上玻璃粘度测量的标准实施规程

1.1 This practice covers the determination of the viscosity of glass above the softening point through the use of a platinum alloy spindle immersed in a crucible of molten glass. Spindle torque, developed by differential angular velocity between crucible and spindle, is measured and used to calculate viscosity. Generally, data are taken as a function of temperature to describe the viscosity curve for the glass, usually in the range from 1 to 106 Pa·s. 1.2 Two procedures with comparable precision and accuracy are described and differ in the manner for developing spindle torque. Procedure A employs a stationary crucible and a rotated spindle. Procedure B uses a rotating crucible in combination with a fixed spindle. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Measuring Viscosity of Glass Above the Softening Point

KS B ISO 9689-2023 光学玻璃原料.在50℃下耐含碱性磷酸盐的洗涤剂水溶液侵蚀性.试验和分类

Raw optical glass — Resistance to attack by aqueous alkaline phosphate-containing detergent solutions at 50 ℃ — Testing and classification

KS B ISO 11455-2023 光学玻璃原料.双折射率的测定

Raw optical glass — Determination of birefringence

KS B ISO 10629-2023 光学玻璃原料.在50℃下耐碱性水溶液侵蚀性.试验方法和分类

Raw optical glass — Resistance to attack by aqueous alkaline solutions at 50 ℃ — Test method and classification

KS B ISO 8424-2023 光学玻璃原料.在25℃下耐酸性水溶液侵蚀性.试验方法和分类

Raw optical glass — Resistance to attack by aqueous acidic solutions at 25 ℃ — Test method and classification