81.040.10 原材料和未加工的玻璃 标准查询与下载

KS B ISO 10629:2016 未加工光学玻璃 耐50℃含碱水溶液 试验方法和分类

Raw optical glass－Resistance to attack by aqueous alkaline solutions at 50 ℃－Test method and classification

KS B ISO 12844-2016 光学玻璃原料金刚石颗粒可磨性试验方法和分类

Raw optical glass－Grindability with diamond pellets－Test method and classification

KS B ISO 8424-2016(2021) 未加工光学玻璃25℃下耐酸性水溶液侵蚀性试验方法和分类

Raw optical glass－Resistance to attack by aqueous acidic solutions at 25 ℃－Test method and classification

KS B ISO 10629-2016(2021) 未加工光学玻璃－耐50℃碱性水溶液侵蚀性－试验方法和分类

Raw optical glass－Resistance to attack by aqueous alkaline solutions at 50 ℃－Test method and classification

KS B ISO 9689-2016 光学玻璃原材料50℃耐碱性磷酸酯水溶液腐蚀试验和分类

Raw optical glass－Resistance to attack by aqueous alkaline phosphate- containing detergent solutions at 50 ℃－Testing and classification

KS B ISO 10629-2016 生光学玻璃 - 试验方法和分类 - 抵抗由碱性水溶液在50℃的攻击

Raw optical glass－Resistance to attack by aqueous alkaline solutions at 50 ℃－Test method and classification

KS B ISO 12123-2016 大块和预成形光学玻璃原材料气泡和其他夹杂物试验方法和分类

Raw optical glass in bulk and preshaped forms－Bubblesand other inclusions－Test method and classification

KS B ISO 12844:2016 未加工光学玻璃 金刚砂可磨性 试验方法和分类

Raw optical glass－Grindability with diamond pellets－Test method and classification

KS B ISO 12844-2016(2021) 光学玻璃原材料金刚石颗粒可磨性试验方法和分类

Raw optical glass－Grindability with diamond pellets－Test method and classification

KS B ISO 8424-2016 光学原玻璃25℃耐酸水溶液侵蚀性试验方法和分类

Raw optical glass－Resistance to attack by aqueous acidic solutions at 25 ℃－Test method and classification

KS B ISO 9689-2016(2021) 未加工光学玻璃－在50℃下耐碱性磷酸盐洗涤剂水溶液侵蚀性－试验和分类

Raw optical glass－Resistance to attack by aqueous alkaline phosphate- containing detergent solutions at 50 ℃－Testing and classification

KS B ISO 12123-2016(2021) 散装和预成形光学玻璃原材料气泡和其他夹杂物试验方法和分类

Raw optical glass in bulk and preshaped forms－Bubblesand other inclusions－Test method and classification

KS B ISO 11455-2016 原光学玻璃 - 双折射的测定

Raw optical glass－Determination of birefringence

ASTM C770-16 测量玻璃应力光学系数的标准试验方法

3.1 Stress-optical coefficients are used in the determination of stress in glass. They are particularly useful in determining the magnitude of thermal residual stresses for annealing or pre-stressing (tempering) glass. As such, they can be important in specification acceptance. 1.1 This test method covers procedures for determining the stress-optical coefficient of glass, which is used in photoelastic analyses. In Procedure A the optical retardation is determined for a glass fiber subjected to uniaxial tension. In Procedure B the optical retardation is determined for a beam of glass of rectangular cross section when subjected to four-point bending. In Procedure C, the optical retardation is measured for a beam of glass of rectangular cross-section when subjected to uniaxial compression. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Measurement of Glass Stress—Optical Coefficient

ASTM C169-16 碱石灰和硼硅酸盐玻璃的化学分析的标准试验方法

3.1 These test methods can be used to ensure that the chemical composition of the glass meets the compositional specification required for the finished glass product. 3.2 These test methods do not preclude the use of other methods that yield results within permissible variations. In any case, the analyst should verify the procedure and technique employed by means of a National Institute of Standards and Technology (NIST) standard reference material having a component comparable with that of the material under test. A list of standard reference materials is given in the NIST Special Publication 260,3 current edition. 3.3 Typical examples of products manufactured using soda-lime silicate glass are containers, tableware, and flat glass. 3.4 Typical examples of products manufactured using borosilicate glass are bakeware, labware, and fiberglass. 3.5 Typical examples of products manufactured using fluoride opal glass are containers, tableware, and decorative glassware. 1.1 These test methods cover the quantitative chemical analysis of soda-lime and borosilicate glass compositions for both referee and routine analysis. This would be for the usual constituents present in glasses of the following types: (1) soda-lime silicate glass, (2) soda-lime fluoride opal glass, and (3) borosilicate glass. The following common oxides, when present in concentrations greater than indicated, are known to interfere with some of the determinations in this method: 28201;% barium oxide (BaO), 0.28201;% phosphorous pentoxide (P2O5), 0.058201;% zinc oxide (ZnO), 0.058201;% antimony oxide (Sb2O3), 0.058201;% lead oxide (PbO). 1.2 The analytical procedures, divided into two general groups, those for referee analysis, and those for routine analysis, appear in the following order:     Sections Procedures for Referee Analysis:    

Standard Test Methods for Chemical Analysis of Soda-Lime and Borosilicate Glass

KS L 2101-2015 硅砂和硅石化学分析方法

Chemical analysis of silica sand and quartz

JC/T 2304-2015 建筑用保温隔热玻璃技术条件

本标准规定了建筑用保温隔热玻璃的术语和定义、分类、分级、标记、要求和试验方法。 本标准适用于符合建筑节能要求的保温隔热玻璃的分级、评价及应用选型。

The technical specification of energy efficient glass for building

GSO ISO 11455:2015 光学玻璃原料双折射的测定

This International Standard describes the stress optical method for determining the birefringence in glass, especially in raw optical glass in bulk and preshaped forms. This method is also used in photo-elasticity. NOTES 1 The calculation of the elastomechanical stress from the birefringence is not the subject of this International Standard. 2 The indication on the drawings of birefringence is specified in ISO 10110-2 (see reference [2] in annex A). This test method is applicable for simple geometrical shapes of glass (see clause 5).

Raw optical glass -- Determination of birefringence

GSO ISO 12123:2015 光学和光子学 光学玻璃原料标准

This International Standard gives rules for the specification of raw optical glass. It serves as a complement to ISO 10110, which provides rules specifying finished optical elements. Since raw optical glass may be quite different in shape and size from the optical elements, its specification also differs from that of optical elements. This International Standard provides guidelines for the essential specification characteristics of raw optical glass in order to improve communication between glass suppliers and optical element manufacturers. For specific applications (e.g. lasers, the infrared spectral range), specifications based on this International Standard will have to be supplemented. NOTE Additional information on how to translate optical element specifications into raw optical glass specifications is given in Annex A.

Optics and photonics -- Specification of raw optical glass

ASTM D5359-98(2015) 用于玻璃纤维制造的废弃物回收的玻璃渣的标准规范

1.1 This specification describes glass cullet recovered from municipal waste destined for disposal. The recovered cullet is intended for use in the manufacture of glass fiber used for insulation-type products.

Standard Specification for Glass Cullet Recovered from Waste for Use in Manufacture of Glass Fiber