81.040.10 原材料和未加工的玻璃 标准查询与下载

KS L 2101-2009(2019) 二氧化硅砂和石英的化学分析

Chemical analysis of silica sand and quartz

KS L 2101-2009 硅砂和硅石化学分析方法

이 표준은 유리 제조용 규사 및 요업용 규석 중의 이산화규소, 산화제이철, 산화알루미늄을

Chemical analysis of silica sand and quartz

ASTM C1663-09 用蒸汽水化试验测量废玻璃或玻璃陶瓷耐久性的标准试验方法

The vapor hydration test can be used to study the corrosion of glass and glass ceramic waste forms under conditions of high temperature and contact by water vapor or thin films of water. This method may serve as an accelerated test for some materials, since the high temperatures will accelerate thermally activated processes. A wide range of test temperatures have been reported in the literature –40°C (Ebert et al, 2005 (3), for example) to 300°C (Vienna et al, 2001 (4), for example). It should be noted that with increased test temperature comes the possibility of changing the corrosion rate determining mechanism and the types of phases formed upon alteration from those that occur in the disposal environment (Vienna et al, 2001 (4)). The vapor hydration test can be used as a screening test to determine the propensity of waste forms to alter and for relative comparisons in alteration rates between waste forms.1.1 The vapor hydration test method can be used to study the corrosion of a waste forms such as glasses and glass ceramics upon exposure to water vapor at elevated temperatures. In addition, the alteration phases that form can be used as indicators of those phases that may form under repository conditions. These tests; which allow altering of glass at high surface area to solution volume ratio; provide useful information regarding the alteration phases that are formed, the disposition of radioactive and hazardous components, and the alteration kinetics under the specific test conditions. This information may be used in performance assessment (McGrail et al, 2002 (1) for example). 1.2 This test method must be performed in accordance with all quality assurance requirements for acceptance of the data. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Measuring Waste Glass or Glass Ceramic Durability by Vapor Hydration Test

BS 2975-2:2008 玻璃制造用砂的取样和分析.化学分析方法

This British Standard describes methods suitable for the chemical analysis of glass-making sands, including instrumental methods using X-ray fluorescence spectrometry (XRF), inductively coupled plasma optical emission spectrometry (ICP-OES), ultraviolet-visible spectrometry (UV-VIS) and atomic absorption spectrometry (AAS).

Sampling and analysis of glass-making sands – Part 2: Methods for chemical analysis

ASTM C730-98(2008) 玻璃压痕硬度标准试验方法

Standard Test Method for Knoop Indentation Hardness of Glass

ASTM C693-93(2008) 浮力密度玻璃的标准试验方法

Standard Test Method for Density of Glass by Buoyancy

ASTM C657-93(2008) 玻璃D-C体积电阻率的标准试验方法

Standard Test Method for D-C Volume Resistively of Glass

WB/T 1036-2006 菱镁制品用玻璃纤维布

本标准规定了玻璃纤维布的产品分类、技术要求、试验方法、检验规则、包装、标志、运输和贮存。 本标准适用于玻璃纤维纱织造的网布。主要用作菱镁制品的增强材料。 菱镁制品不允许使用高碱玻璃纤维布作为增强材料。

Glass fiber nets used for magnesite products

KS B ISO 11455:2006 未加工光学玻璃.双折射的测定

이 규격은 유리 특히 벌크 및 프리쉐입 형태의 광학 유리 원재료에서의 복굴절을 판단하는

Raw optical glass-Determination of birefringence

KS B ISO 9689:2006 未加工光学玻璃.抗50℃碱性磷酸盐洗涤剂溶液腐蚀性.试验和分类

이 규격은 50℃에서 수성 알칼리 인산염을 포함한 세척액의 부식에 대한 광학 유리 원재료의

Raw optical glass-Resistance to attack by aqueous alkaline phosphate- containing detergent solutions at 50 ℃-Testing and classification

KS B ISO 12123:2006 散装与成型光学玻璃原材料.气泡与异物.试验方法与分类

이 규격은 벌크 및 성형된 광학 유리 원재료에서의 이물 결정을 위한 시험 방법을 규정한다.

Raw optical glass in bulk and preshaped forms-Bubblesand other inclusions-Test method and classification

KS B ISO 12844:2006 未加工光学玻璃.金刚砂可磨性.试验方法和分类

이 규격은 다이아몬드 펠릿에 의한 광학 유리 원재료에 대한 연삭능을 결정하는 시험 방법

Raw optical glass-Grindability with diamond pellets-Test method and classification

KS B ISO 10629:2006 未加工光学玻璃.耐50℃含碱水溶液.试验方法和分类

이 규격은 50 ℃에서의 알칼리 액에 의한 부식에 대하여 원재료의 내성을 시험하는 방법과

Raw optical glass-Resistance to attack by aqueous alkaline solutions at 50 ℃-Test method and classification

KS B ISO 8424:2006 未加工光学玻璃.耐25℃含水酸溶液腐蚀性能.试验方法和分类

이 규격은 25 ℃에서의 산성액에 의한 부식에 대하여 원재료의 내성을 시험하는 방법과 이

Raw optical glass-Resistance to attack by aqueous acidic solutions at 25 ℃-Test method and classification

NF S10-019/A1:2006 块状和预先成形的光学玻璃原材料.气泡和其他杂质.试验方法和分类

Raw optical glass in bulk and preshaped forms - Bubbles and other inclusions - Test method and classification.

ISO 12123:1996/Amd 1:2005 块状和预先成形的光学玻璃原材料.气泡和其他杂质.试验方法和分类.修改件1

This is Amendment 1 to ISO 12123-1996 (Raw optical glass in bulk and preshaped forms — Bubbles and other inclusions Test method and classification)

Raw optical glass in bulk and preshaped forms - Bubbles and other inclusions - Test method and classification; Amendment 1

CNS 14932-2005 玻璃容器制造用之废弃碎玻璃原料

本标准规定资源回收之废弃玻璃制品及碎玻璃（玻璃碎屑），作为玻璃容器（或玻璃瓶，以下简称玻璃容器）制造用原料之质量及其试验法。

Waste glass cullet as a raw material for manufacture of glass containers

BS 2975-1:2004 玻璃制造用砂的取样和分析.玻璃制造用砂的取样方法和物理试验

This British Standard describes a method of sampling and physical testing of sands used for a variety of glass-making activities with the intention of providing a basis for either continued supply of established materials or for evaluation of new sources of silica sand. NOTE Annex A illustrates commonly encountered particle size distribution and moisture content of glass-making sands.

Sampling and analysis of glass-making sands - Methods for sampling and physical testing of glass-making sands

JC/T 935-2004 玻璃纤维工业用玻璃球

Glass marble for glassfiber production

ASTM C158-02 玻璃弯曲强度的标准试验方法（断裂模量的测定）

1.1 These test methods cover the determination of the modulus of rupture in bending of glass and glass-ceramics.1.2 These test methods are applicable to annealed and prestressed glasses and glass-ceramics available in varied forms. Alternative test methods are described; the test method used shall be determined by the purpose of the test and geometric characteristics of specimens representative of the material.1.2.1 Test Method A is a test for modulus of rupture of flat glass.1.2.2 Test Method B is a comparative test for modulus of rupture of glass and glass-ceramics.1.3 The test methods appear in the following order:SectionsTest Method A6 to 9Test Method B10 to 151.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific hazard statements are given in Section 10 and A1.5, A2.3.3, A2.4.3 and A2.5.3.

Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)