81.060.01 陶瓷综合 标准查询与下载

DB41/T 664-2010 当阳峪绞胎瓷

Dangyangyu Twisted Bodied Porcelain

KS L 1600-2010 工程陶瓷制品断裂韧度试验方法

이 표준은 기계 부품, 구조 재료 등의 고강도 재료로 사용되는 고성능 요업 제품의 상온에서

Testing methods for fracture toughness of high performance ceramics

KS L 2102-2005 玻璃和微晶玻璃努氏压痕硬度试验方法

Testing method for knoop indentation hardness of glass and glass-ceramics

KS L 2102-2000 玻璃的努氏压痕硬度和玻璃 - 陶瓷的测试方法

Testing method for knoop indentation hardness of glass and glass-ceramics

KS L 1208-2000 努氏硬度试验方法瓷

TESTING METHOD FOR KNOOP INDENTATION HARDNESS OF CERAMIC WHITEWARES

ASTM C322-82(1997)e1 陶瓷洁具粘土取样的标准实施规程

Standard Practice for Sampling Ceramic Whiteware Clays

QB/T 2131-1995 日用陶瓷链式干燥器热平衡、热效率测定与计算方法

本标谁规定了日用陶瓷链式千燥器的热平衡、热效率的测定与计算方法。 本标谁适用于日用陶瓷坯体干燥过程中，使用热烟气、各类窑炉余热和锅炉饱和水蒸气为干燥热源的链式干燥器热平衡、热效率的测定与计算，对于生产其他类型陶瓷坯体的链式、箱式或隧道式干燥器的热平衡、热效率测定与计算亦可参照或采用本标准。

Determination and Calculation Method of Thermal Balance and Thermal Efficiency of Daily Ceramic Chain Dryer

QB/T 2126-1995 日用陶瓷火焰隧道窑热工性能指标监测与计算方法

本标准规定了日用陶瓷火焰隧道赛热工基本性能指标监测与计算方法。 本标准适用于日用陶瓷产品生产中，使用液体、固体和气体燃料的火焰隧道赛热工基本性能监测与计算。

Monitoring and Calculation Method of Thermal Performance Index of Flame Tunnel Kiln for Daily-use Ceramics

QB/T 2130-1995 日用陶瓷彩烤辊道窑热平衡、热效率测定与计算方法

本标淮规定了日用陶瓷工业中彩烤陶瓷制品辊道窑的热平衡、热效率测定与计算方法。 本标淮适用于日用陶瓷制品彩烤过程中，使用液体、固体、气体燃料以及电能的辊道窑的热平衡、热效率的测定与计算。对于彩烤其他陶瓷制品辊道窑、素烧辊道窑热平衡、热效率的测定与计算亦可参照本标准，井根据具体情况增删测定项目。

Determination and Calculation Method of Thermal Balance and Thermal Efficiency of Colored Roasting Roller Hearth Kiln for Daily-use Ceramics

QB/T 2129-1995 日用陶瓷工业间歇式窑炉热平衡、热效率测定与计算方法

本标准规定了日用陶瓷工业间歇式窑炉热平衡、热效率的测定与计算方法。 本标准适用于日用陶瓷产品生产中，使用液体、固体和气体燃料的间歇式窑炉热平衡、热效率的测定与计算。对于生产其他类型陶瓷产品的间歇式窑炉其热平衡、热效率的测定与计算可参照采用本标准。也可根据窑炉的具体现状增删测定项目。

Determination and Calculation Method of Heat Balance and Heat Efficiency of Batch Kiln in Household Ceramics Industry

QB/T 2127-1995 日用陶瓷彩烤辊道窑热工性能指标监测与计算方法

本标准规定了日用陶瓷工业中彩烤陶瓷制品的辊道窑热工性能指标监测与计算方法。 本标准适用于月用陶瓷制品彩烤过程中，使用液体、固体、气体燃料以及电能的辊道窑热工性能指标监侧与计算。对于彩烤其他陶瓷制品的辊道窑、素烧辊道窑的热工基本性能指标监测与计算亦可参照本标准，并根据具体情况增删监测项目。

Monitoring and Calculation Method of Thermal Performance Indicators of Color-Baked Roller-hearth Kiln for Daily-use Ceramics

ASTM C623-92(2010) 用共振现象对玻璃和玻璃陶瓷材料的杨氏模量,剪切模量及泊松比的标准试验方法

This test system has advantages in certain respects over the use of static loading systems in the measurement of glass and glass-ceramics: Only minute stresses are applied to the specimen, thus minimizing the possibility of fracture. The period of time during which stress is applied and removed is of the order of hundreds of microseconds, making it feasible to perform measurements at temperatures where delayed elastic and creep effects proceed on a much-shortened time scale, as in the transformation range of glass, for instance. The test is suitable for detecting whether a material meets specifications, if cognizance is given to one important fact: glass and glass-ceramic materials are sensitive to thermal history. Therefore the thermal history of a test specimen must be known before the moduli can be considered in terms of specified values. Material specifications should include a specific thermal treatment for all test specimens.1.1 This test method covers the determination of the elastic properties of glass and glass-ceramic materials. Specimens of these materials possess specific mechanical resonance frequencies which are defined by the elastic moduli, density, and geometry of the test specimen. Therefore the elastic properties of a material can be computed if the geometry, density, and mechanical resonance frequencies of a suitable test specimen of that material can be measured. Young''s modulus is determined using the resonance frequency in the flexural mode of vibration. The shear modulus, or modulus of rigidity, is found using torsional resonance vibrations. Young''s modulus and shear modulus are used to compute Poisson''s ratio, the factor of lateral contraction. 1.2 All glass and glass-ceramic materials that are elastic, homogeneous, and isotropic may be tested by this test method. The test method is not satisfactory for specimens that have cracks or voids that represent inhomogeneities in the material; neither is it satisfactory when these materials cannot be prepared in a suitable geometry. Note 18212;Elastic here means that an application of stress within the elastic limit of that material making up the body being stressed will cause an instantaneous and uniform deformation, which will cease upon removal of the stress, with the body returning instantly to its original size and shape without an energy loss. Glass and glass-ceramic materials conform to this definition well enough that this test is meaningful. Note 28212;Isotropic means that the elastic properties are the same in all directions in the material. Glass is isotropic and glass-ceramics are usually so on a macroscopic scale, because of random distribution and orientation of crystallites. 1.3 A cryogenic cabinet and high-temperature furnace are described for measuring the elastic moduli as a function of temperature from −195°C to 1200°C. 1.4 Modification of the test for use in quality control is possible. A range of acceptable resonance frequencies is determined for a piece with a particular geometry and density. Any specimen with a frequency response falling outside this frequency range is rejected. The actual modulus of each piece need not be determined as long as the limits of the selected frequency range are known to include the resonance frequency that the piece must possess if its geometry and density are within specified tolerances. 1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.6 This standard does not purport to address......

Standard Test Method for Young's Modulus, Shear Modulus, and Poisson's Ratio for Glass and Glass-Ceramics by Resonance

JIS R 1503:1991 化学工业用耐酸磁器的试验方法

この規格は，化学工業用耐酸磁器の試験方法について規定する。

Testing methods for acid proof porcelain of chemical industry

JIS R 1501:1991 化学工业用耐酸瓷器的通则

この規格は。化学工業用耐酸磁器(以下，耐酸磁器という。)の一般的な共通事項について規定する。

General rules of acid proof porcelains for chemical industry

SNI 15-0924-1989 陶瓷原材料粘性测试方法

Test method for casting mass viscosity of fine ceramics using Lehmannapparatus

ASTM D116-86(2011) 电绝缘液体电阻率(电阻系数)的标准试验方法

For any given ceramic composition, one or more of the properties covered herein may be of more importance for a given insulating application than the other properties. Thus, it may be appropriate that selected properties be specified for testing these ceramic materials. Pertinent statements of the significance of individual properties may be found in the sections pertaining to such properties.1.1 These test methods outline procedures for testing samples of vitrified ceramic materials that are to be used as electrical insulation. Where specified limits are mentioned herein, they shall not be interpreted as specification limits for completed insulators.

Standard Test Methods for Vitrified Ceramic Materials for Electrical Applications