共找到 1384 条与 增强塑料 相关的标准,共 93 页
Test method for water absorption of sandwich structures or cores
Test methods for mechanical properties of carbon fiber reinforced composite thin-walled pipe fittings Part 2: Compression test
Test methods for mechanical properties of carbon fiber reinforced composite thin-walled pipe fittings Part 1: Tensile test
Test method for density of sandwich structures or cores
Determination of ring creep properties of glass fiber reinforced thermoset plastic (GRP) pipes under wet or dry conditions
Fiber-reinforced plastic composites include composites standard certification schemes for reduced and extended certifications
Evaluation method for heat and moisture resistance of carbon fiber reinforced composite materials
Test method for mechanical properties of fiber-wound reinforced composite ring specimens
Determination of fiber length of glass fiber reinforced plastic products
Fibre-reinforced composites—Method for accelerated moisture absorption and supersaturated conditioning by moisture using sealed pressure vessel
Fiber reinforced plastic composites tanks for water treatment units
本文件描述了聚合物基复合材料多向层合板无开孔压缩试验方法的原理、试验设备、试样、试验条件、应变计和引伸计的使用方法、试验步骤、试验结果和试验报告。 本文件适用于连续纤维增强聚合物基复合材料对称、均衡多向层合板无开孔压缩性能的测定。编织复合材料平板无开孔压缩性能的测定可参照使用。
Test method for compression of fiber reinforced polymer matrix composite multi-directional laminates without open-hole
本文件规定了纤维增强塑料层合板冲击后压缩性能试验的方法原理、试样、试验条件、试验设备、试验步骤、结果计算和试验报告。 本文件适用于具有均衡对称铺层的连续纤维增强塑料层合板的冲击后压缩强度、冲击后有效压缩模量和冲击后极限压缩应变的测定。
Test method for compression after impact properties of fiber reinforced plastic laminates
本文件规定了测定聚合物基复合材料吸湿性能及平衡状态调节的试验装置、试样、试验条件、试验步骤、试验结果计算和试验报告。 本文件适用于聚合物基复合材料力学试验前的吸湿平衡状态调节、测定平衡吸湿量和湿扩散系数。
Test method for moisture absorption properties and equilibrium conditioning of polymer matrix composite materials
本文件描述了测定碳纤维增强塑料复合材料(CFRP)层合板的厚度方向(面外)拉伸强度、拉伸破坏应变和拉伸模量的弯曲试验方法。 本文件适用于碳纤维增强塑料复合材料单向(UD-CFRP)层合板。此外,由于厚度方向拉伸强度存在尺寸效应,还描述了有效体积的计算。
Fibre-reinforced plastic composites—Determination of laminate through-thickness properties—Part 2:Determination of the elastic modulus,the strength and the Weibull size effects by flexural test of uni
本文件界定了可交联预浸料在命名、生产和使用时用的术语定义和命名符号。
Plastics—Prepregs—Definitions of terms and symbols for designations
本文件规定了夹层结构或芯子平压性能的试验原理、试验设备、试样、试验条件和状态调节、试验步骤、试验结果及处理和试验报告。 本文件适用于夹层结构或芯子的平压强度和平压模量测定。
Test method for flatwise compression properties of sandwich constructions or cores
本文件规定了用双梁法(DBS)测定纤维增强塑料复合材料的层间剪切强度和层间剪切模量。 本文件适用于能发生可接受层间剪切失效的玻璃纤维或碳纤维增强热固性塑料复合材料。 本文件仅适用于具有对称和均衡铺层的层合板,以避免试验结果受到弯曲/扭转或弯曲/拉伸耦合变形的影响(见6.2)。 本文件尤其适用于纤维沿试样长度方向(轴向)排列的单向层合板。
Fibre-reinforced plastic composites—Determination of interlaminar strength and modulus by double beam shear test
本文件规定了配网用复合材料杆塔的分类和标记,原材料及构造,技术要求,试验方法,检验规则,标志,贮存、运输及产品合格证。 本文件适用于标称电压35kV及以下电力架空线路用复合材料杆塔(以下简称杆塔)。通信及接触网架空线路中的复合材料杆塔,支柱(照明、信号、多功能杆等),可参照本文件。
Composite pole in distribution network
本文件规定了夹层结构滚筒剥离强度的试验原理、试验设备、试样、试验条件和状态调节、试验步骤、试验结果及处理和试验报告。 本文件适用于柔性面板夹层结构的剥离强度测定,也适用于选用胶粘剂的其他组合件的剥离强度测定。
Test method for climbing drum peel strength of sandwich constructions
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号