83.120 增强塑料 标准查询与下载

GB/T 3855-1983 碳纤维增强塑料树脂含量试验方法

本方法系用硫酸消化法测定碳纤维增强塑料树脂含量，其原理是用加热的硫酸使树脂基体分解完全。适用于硫酸在一定条件下能使树脂基体完全分解又不过份地腐蚀纤维的碳纤维增强塑料。

Test method for resin content of carbon fiber reinforced plastics

GB/T 3854-1983 纤维增强塑料巴氏(巴柯尔)硬度试验方法

本方法适用于测定纤维增强塑料及其制品的硬度，也可用于非增强硬塑料。

Test method for hardness of fiber reinforced plastics by means of Barcol impressor

GB/T 3355-1982 纤维增强塑料纵横剪切试验方法

本标准适用于测定单向纤维或织物增强塑料平板的纵横剪切弹性模量、纵横剪切强度和纵横剪切应力-应变曲线。

Test method for longitudinal transverse shear(L-T shear )properties of fiber reinforced plastics

GB/T 3139-1982 玻璃钢导热系数试验方法

本方法适用于用平板稳态法测定玻璃钢导热系数。

Test method for thermal conductivity of glassfiber reinforced plastics

GB/T 2843-1981 钢化玻璃抗冲击性试验方法(227克钢球试验)

本标准规定了地面运输车辆及船舶所使用的钢化玻璃板的抗冲击性试验方法（227克钢球试验）。

The method of tempered glass impact test(227g steel ball test)

GB/T 2572-1981 玻璃钢平均线膨胀系数试验方法

1.本方法用于测定玻璃钢的平均线膨胀系数。

Glass fiber reinforced plastics-Average linear expansion factor of fiber-Method of testing

GB/T 3362-2017/XG1-2019 碳纤维复丝拉伸性能试验方法 第1号修改单

Modification No. 1 of Test Method for Tensile Properties of Carbon Fiber Multifilament

BS ISO 8065:2024 复合材料和增强纤维 裂纹扩展的机械发光可视化方法用于接头评估

Composites and reinforcements fibres. Mechanoluminescent visualization method of crack propagation for joint evaluation

24/30477435 DC 纤维增强复合材料 通过微机械单纤维拉拔试验测量界面剪切强度

BS ISO 19375 Fibre-reinforced composites -Measurement of interfacial shear strength by means of a micromechanical single-fibre pull-out test

T/CIA 001-2023 给水排水工程玻璃纤维增强塑料管合格评定技术规程

本规程对执行GB/T 21238、GB/T21492和JC/T 2538以及ISO 23856等标准的夹砂和非夹砂玻璃纤维增强塑料管产品和组件的合格评定做出了规定，可作为制造商质量管理体系中质量计划的一部分，也可用于第三方编制认证程序。

Technical specification for assessment of conformity of glass fiber reinforced plastic pipes for water supply and sewerage engineering

24/30474129 DC 纤维增强塑料 块状模塑料 (BMC) 和团状模塑料 (DMC) 要求和规范

BS ISO 8606 Fibre-reinforced plastics - Bulk moulding compound (BMC) and dough moulding compound (DMC) - Requirements and specifications

ASTM C363/C363M-16(2024) 蜂窝芯材料节点抗拉强度的标准试验方法

Standard Test Method for Node Tensile Strength of Honeycomb Core Materials

ASTM C394/C394M-16(2024) 夹层芯材剪切疲劳的标准试验方法

Standard Test Method for Shear Fatigue of Sandwich Core Materials

ASTM C364/C364M-16(2024) 夹层结构的边缘抗压强度的标准试验方法

Standard Test Method for Edgewise Compressive Strength of Sandwich Constructions

ASTM C480/C480M-16(2024) 夹层结构弯曲蠕变的标准试验方法

Standard Test Method for Flexure Creep of Sandwich Constructions

ASTM D6416/D6416M-16(2024) 承受分布载荷的简支夹层复合板二维弯曲特性的标准试验方法

Standard Test Method for Two-Dimensional Flexural Properties of Simply Supported Sandwich Composite Plates Subjected to a Distributed Load

GSO ASTM D2290:2024 塑料或增强塑料管表观环向拉伸强度的标准试验方法

1.1 This test method covers the determination of the comparative apparent tensile strength of most plastic products utilizing a split disk or ring segment test fixture, when tested under defined conditions of pretreatment, temperature, humidity, and test machine speed. This test method is applicable to reinforced-thermosetting resin pipe regardless of fabrication method. This test method also is applicable to extruded and molded thermoplastic pipe. Procedure A is used for reinforced-thermosetting resin pipe; Procedure B is used for thermoplastic pipe of any size; Procedure C is used for thermoplastic pipe with nominal diameter of 41⁄2 in. (110 mm) and greater. Procedure D is used for polyethylene pipe with a nominal diameter of 14 in. (350 mm) and greater and preferably having wall thickness 1 in. (25 mm) and greater. Procedure E is used for polyvinyl chloride (PVC) pipe with a nominal diameter of 14 in. (350 mm) and greater and having wall thickness 0.5 in. (12.7 mm) and greater. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe

T/CSTM 01223-2024 风电叶片用拉挤板 复合组件I型层间断裂韧性GIC的测定

本文件规定了用双悬臂梁（DCB）试样测定风电叶片用拉挤板复合组件I型层间断裂韧性GIC的方法。 本文件适用于拉挤板—拉挤板复合组件和拉挤板—层合板复合组件I型层间断裂韧性GIC的测定，其它类型复合组件的测定也可参照使用。

Pultruded plates for wind turbine blades —Determination of mode I interlaminar fracture toughness GIC of assemblies

BS ISO 8060:2024 复合材料和增强纤维 碳纤维增强塑料 (CFRP) 和金属组件 通过楔形断裂试验表征粘合界面的耐久性

Composites and reinforcements fibres. Carbon fibre reinforced plastics (CFRPs) and metal assemblies. Characterization of durability of adhesive interfaces by wedge rupture test

BS ISO 8605:2024 纤维增强塑料 片状模塑料 (SMC) 要求和规格

Fibre-reinforced plastics. Sheet moulding compound (SMC). Requirements and specifications