83.160.10 标准查询与下载

ASTM F2870-23 315/70R22.5 154/150L载重汽车标准参考试验轮胎的标准规范

Standard Specification for 315/70R22.5 154/150L Radial Truck Standard Reference Test Tire

ASTM F2871-23 245/70R19.5 136/134M载重汽车标准参考试验轮胎的标准规范

Standard Specification for 245/70R19.5 136/134M Radial Truck Standard Reference Test Tire

23/30478325 DC BS EN 16662-3 公路车辆 乘用车和轻型车辆轮胎的辅助抓地力装置 第3部分：生产控制（自我监控）和第三方监控

BS EN 16662-3. Road vehicles. Supplementary grip devices for tyres of passenger cars and light duty vehicles - Part 3. Production control (self monitoring) and third-party surveillance

23/30478322 DC BS EN 16662-2 公路车辆 乘用车和轻型车辆轮胎辅助抓地力装置 第2部分：具体试验程序

BS EN 16662-2. Road vehicles. Supplementary grip devices for tyres of passenger cars and light duty vehicles - Part 2. Specific test procedures

T/CRIA 28001-2023 轮胎理赔用术语及定义

本文件规定了轮胎理赔中用于描述轮胎损伤和缺陷的一般术语和定义。 本文件适用于轿车轮胎及载重汽车轮胎。

Tire claims terms and definitions

23/30461171 DC BS ISO 4000-1 乘用车轮胎和轮辋 第 1 部分：轮胎（公制系列）

BS ISO 4000-1. Passenger car tyres and rims - Part 1. Tyres (metric series)

GSO ISO 5751-2:2023 摩托车轮胎和轮辋（公制系列） 第2部分：轮胎尺寸和承载能力

ISO 5751-2:2010 specifies the tyre size designation, dimensions and load-carrying capacities of metric series motorcycle tyres. It is applicable to such tyres with a height-to-width ratio of 100 % and below.

Motorcycle tyres and rims (metric series) — Part 2: Tyre dimensions and load-carrying capacities

GSO ISO 4000-1:2023 乘用车轮胎和轮辋 第1部分：轮胎（公制系列）

This document specifies the designation, dimensions, and load ratings of metric-series tyres primarily intended for passenger cars.

Passenger car tyres and rims — Part 1: Tyres (metric series)

ASTM F1502-23 乘用车、轻型卡车和中型车辆轮胎静态测量的标准试验方法

1.1 This test method covers methods for performing certain mechanical static measurements on tires. The term “static” implies that the tire is not rotating while measurements are being made. 1.2 The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Static Measurements on Tires for Passenger Cars, Light Trucks, and Medium Duty Vehicles

ASTM F870-23 乘用车轮胎胎面印迹沟槽面积分数和尺寸测量的标准实施规程

1.1 This practice covers a technique for measuring the groove or void area of a tire tread pattern. The void area is measured on the inked impression of a tire tread statically loaded against heavyweight paper on a load platen. 1.2 This procedure is intended to serve as a reference practice for measuring groove or tread pattern void areas in a tire-footprint impression. This technique is usable by any laboratory without special equipment although more sophisticated procedures are also commonly employed, such as optical or video camera processes. 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Tread Footprints of Passenger Car Tires Groove Area Fraction and Dimensional Measurements

ASTM F724-23 轮胎胎侧部件抗裂性户外评定的标准试验方法

1.1 This test method covers procedures for evaluating passenger car tires for sidewall component integrity and cracking resistance, using an outdoor roadwheel. 1.2 This test method evaluates the resistance of tire sidewalls to dynamic weathering, atmospheric ozone cracking, fatigue cracking, or openings of splices within, or of junctures between, sidewall components and cracking at molded sidewall elements. 1.3 This test method is useful for evaluating tire black sidewalls, white, or other colored, sidewalls, and coverstrips. 1.4 This test method is limited to comparative performance testing between a “control” sidewall component or assembly and one or more experimental alternatives that are built onto the same tire (“multisection”) or onto tires that are identical in all respects other than the sidewall variation. 1.5 This test method is not applicable to evaluation of sidewall resistance to abrasion, as may be experienced in severe cornering or curb scuffing. 1.6 The values stated in SI units are to be regarded as the standard. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific precaution statements, see 5.2. 1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Outdoor Evaluation of Tire Sidewall Component Cracking Resistance

T/CRIA 11006-2023 汽车轮胎低碳产品评价规范

本文件规定了汽车轮胎低碳产品评价要求、二氧化碳排放核算要求、评价规则、标志和使用。 本文件适用于轿车子午线轮胎和载重汽车子午线轮胎的低碳产品评价。

Evaluation Specification for Low Carbon Products of Automotive Tires

T/CSAE 278-2022 乘用车轮胎干地操控性和舒适性主观评价方法

本文件规定了乘用车轮胎干地操控性和舒适性主观评价试验方法。 本文件适用于乘用车轮胎，商用车轮胎可参考本方法中的评价内容、评分标准及评价项目开展评价。

Dry ground handling and comfort of passenger car tires subjective evaluation method

T/CSAE 271-2022 轮胎瞬态侧偏特性通用试验方法

本文件规定了轮胎瞬态侧偏特性试验的通用方法。 本文件适用于轿车轮胎、轻型载重汽车轮胎。

General test method for transient lateral slip property of tyres

T/CSAE 272-2022 轮胎瞬态纵滑特性通用试验方法

本文件规定了轮胎瞬态纵滑特性试验的基础方法。 本文件适用于轿车轮胎、轻型载重汽车轮胎。

General test method for transient longitudinal slip property of tyres

T/CSAE 273-2022 轮胎瞬态复合滑移特性通用试验方法

本文件规定了轮胎瞬态复合滑移特性通用试验的方法。 本文件适用于轿车轮胎、轻型载重汽车轮胎。

General test method for transient state combined slip property of tyres

KS M ISO 4000-1-2022 乘用车轮胎和轮辋第1部分:轮胎（米制系列）

Passenger car tyres and rims Part 1: Tyres(metric series)

T/CSAE 277-2022 乘用车轮胎冰面抓着性能试验方法

本文件规定了具体规定室内冰面抓着性能试验方法。 本文件适用于乘用车轮胎，其它类型轮胎可参考执行。

Methods for measuring ice grip performance of passenger car

KS M ISO 29802:2022 全地形（AT）轮胎和轮辋.5度锥形轮辋上有符号标记的充气轮胎.名称、尺寸、标记和额定载荷

All terrain(AT) tyres and rims — Symbol marked pneumatic tyres on 5 degrees tapered rims — Designation, dimension, marking and load ratings

KS M ISO 29802-2022 全地形（AT）轮胎和轮辋.5度锥形轮辋上有符号标记的充气轮胎.名称、尺寸、标记和额定载荷

All terrain(AT) tyres and rims — Symbol marked pneumatic tyres on 5 degrees tapered rims — Designation, dimension, marking and load ratings