83.160.20 标准查询与下载

SAE AS1188A-2014 航空轮胎充气和放气设备

This specification covers minimum design and test requirements for aircraft tire inflation-deflation equipment for use on all types of aircraft. It shall be the responsibility of the airframe manufacturer to determine the compatibility of the requirement with the applicable aircraft and to specify requirements in excess of these minimums as necessary.

Aircraft Tire Inflation-Deflation Equipment

ISO 7295:1988/Amd 1:2014 航空器用轮胎汽门嘴. 互换性尺寸; 修改件1

Tyre valves for aircraft - Interchangeability dimensions; Amendment 1

SAE ARP6152-2013 飞机轮胎服务过载能力

This SAE Aerospace Recommended Practice (ARP) defines a procedure for demonstrating service overload capability for new, main and nose landing gear, radial or bias tires fitted on multiple wheel landing gear of Part 25 certified aircraft.

Aircraft Tires Service Overload Capability

SAE AS707C-2013 无内胎飞机轮的热敏感膨胀压力释放装置

The focus of this SAE Aerospace Standard (AS) is the integration of thermally actuated pressure release devices, hereafter referred to as fuse plugs, with the wheel and brake assembly. It does not address the manufacturing, quality or acceptance test requirements pertaining to the production of these fuse plugs. It establishes minimum design, installation, qualification, and operational requirements for fuse plugs which are used only in tubeless tire type aircraft braked wheels. Fuse plugs are designed to completely release the contained inflation pressure from a tubeless tire and wheel assembly when brake generated heat causes the tire or wheel to exceed a

Thermal Sensitive Inflation Pressure Release Devices for Tubeless Aircraft Wheels

KS W 1537-2013 飞机轮胎和轮辋锛峆艺术1锛魋规范

Aircraft tyres and rims－Part 1：Specification

KS W 1538-2013 飞机轮胎和轮辋艺术2轮胎的测试方法

Aircraft tyres and rims－Part 2：Test methods for tyres

NF T40-241-1:2013 飞机轮胎和轮辋.第1部分:规格

Aircraft tyres and rims - Part 1: specifications

NF T40-241-2:2013 飞机轮胎和轮辋.第2部分:轮胎试验方法

Aircraft tyres and rims - Part 2: test methods for tyres

GSO ISO 9475:2013 航空轮胎内胎和无内胎轮胎气门嘴芯和盖试验方法

This International Standard specifies the test methods used for valve cores and caps for aircraft tyres, with or without inner tubes, and minimum airtightness standards. It constitutes a detailed method allowing products to be evaluated on the same basis, and results to be compared.

Aircraft inner tube and tubeless tyre valves -- Cores and caps -- Test methods

BS ISO 3324-1:2013 飞机轮胎和轮圈.规格

Aircraft tyres and rims. Specifications

BS ISO 3324-2:2013 飞机轮胎和轮圈.轮胎和试验方法

Aircraft tyres and rims. Test methods for tyres

ISO 3324-1:2013 飞机轮胎和轮辋.第1部分:规格

This part of ISO 3324 gives specifications for new and retread aircraft tyres and rims. These specifications are for new designs. Refer to regional standards for prior designs.

Aircraft tyres and rims - Part 1: Specifications

ISO 3324-2:2013 飞机轮胎和轮辋.第2部分:轮胎试验方法

This part of ISO 3324 specifies test methods for new and retreaded aircraft tyres in the following categories: a)low-speed tyres: for ground speeds up to and including 104 kn (120 mile/h); b)high-speed tyres: for ground speeds above 104 kn (120 mile/h). NOTE 1 kn = 1,852 km/h = 1,1508 mile/h.

Aircraft tyres and rims - Part 2: Test methods for tyres

SAE ARP5542A-2012 手持式飞机轮胎充气压力表

This SAE Aerospace Recommended Practice (ARP) covers the design, construction, performance and testing requirements for hand held aircraft tire inflation pressure gauges with valve stem attachment chuck to be used with all aircraft types. The ground-based gauges in this specification are those which are designed to read the tire inflation pressure from a position adjacent to the tire.

Hand Held Aircraft Tire Inflation Pressure Gauges

HG/T 2484-2011 航空内胎气门嘴

本标准规定了航空内胎气门嘴(以下简称(以下简称))的型号及规格表示方法、结构尺寸、技术要求、试验方法、检验规则和产品标志、包装、贮存的通用要求。　　 本标准适用于各类航空内胎气门嘴。

Tyre tube valves for aircraft

HG/T 2485-2011 航空轮胎气门芯

本标准规定了航空轮胎气门芯(以下简称气门芯)的类型、结构尺寸、技术要求、试验方法、检验规则和产品标志、包装、贮存的通用要求。　　 本标准适用于各类航空轮胎气门嘴用的气门芯。

Aircraft tyre valve cores

KS W 2511-2011 航空器轮胎用橡胶管

이 표준은 항공기의 메인, 노스, 테일 및 비이칭 휠 케이스에 사용되는 타이어용 공기 주입

Rubber tubes for aircraft tires

SAE AIR4830A-2011 航空器轮胎状态监控系统

The intent of this SAE Aerospace Information Report (AIR) is to inform the aerospace industry about various systems available to monitor the inflation pressure and/or temperature of an aircraft tire. The tire pressure indicating system (TPIS), with cockpit display, is the most widely used of all aircraft tire monitoring systems, and is detailed in this document more than other systems.

Aircraft Tire Condition Monitoring Systems

SAE AIR5487B-2011 航空器轮胎历史记录

This SAE Aerospace Information Report (AIR), is intended to provide a continuum on historical development of aircraft tires.

Aircraft Tire History

KS M ISO 9475-2010(2021) 航空内胎和无内胎轮胎气门芯和气门帽试验方法

Aircraft inner tube and tubeless tyre valves－Cores and caps－Test methods