共找到 2403 条与 粘合剂和胶粘产品 相关的标准,共 161 页
本文件规定了热熔胶成型自动化加工系统的基本原理、系统构成、通用技术、技术要求、试验方法、检验规则以及标志包装、运输和贮存。 本文件适用于热熔胶成型自动化加工系统的应用与测试。
Hot melt adhesive molding automated processing system
本文件规定了光伏组件用聚酯与聚烯烃弹性体(POE)多层复合胶膜的分类、要求、试验方法、检验规则、标志和随行文件以及包装、运输和贮存
Multilayer composite films of polyester and polyolefin elastomer for photovoltaic modules
本文件规定了乙烯-醋酸乙烯酯共聚物(EVA)/乙烯-α-烯烃共聚物(POE)/乙烯-醋酸乙烯酯共聚物(EVA)胶膜(简称EPE胶膜)的要求、试验方法、检验规则、包装、运输和贮存
Co-extruded EPE films for photovoltaic module packaging
本文规定了汽车内饰用胶粘剂的分类和标记、要求、试验方法、检验规则、标志、标签、包装、运输和贮存。
Adhesive for car interior use
本文件规定了车门防水用丁基密封胶的术语和定义、要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于汽车门防水用的丁基密封胶(以下简称“密封胶”)。
Butyl sealant for car door waterproofing
本文件规定了新能源汽车电子用有机硅导热胶的术语和定义、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于新能源汽车电子用单组分硅胶、双组分硅胶和导热灌硅橡胶。
Silicone thermal adhesive for new energy automotive electronics
Draft BS EN 15416-5. Adhesives for load bearing timber structures other than phenolic and aminoplastic. Test methods - Part 5. Determination of minimum pressing time under referenced conditions
Draft BS EN 15416-4 Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 4: Determination of open assembly time under referenced conditions
Draft BS EN 15416-3. Adhesives for load bearing timber structures other than phenolic and aminoplastic. Test methods - Part 3. Creep deformation test at cyclic climate conditions with specimens loaded in bending shear
Draft BS EN 15416-1. Adhesives for load bearing timber structures other than phenolic and aminoplastic. Test methods - Part 1. Long-term tension load test perpendicular to the bond line at varying climate conditions with specimens perpendicular…
本文件规定了无溶剂有机硅涂覆保护胶的术语和定义、分类、要求、试验方法、检验规则以及标志、包装、运输与贮存。 本文件适用于对电路板及电子元器件起到保护、固定和粘接作用的涂覆胶。
Solventless silicone conformal coating
本文件规定了电源用导热有机硅灌封胶的术语和定义、分类、要求、试验方法、检验规则以及标志、包装、运输与贮存。 本文件适用于对电源组件起导热和电气绝缘等防护作用的有机硅灌封胶。
Thermal conductive silicone sealant for power supply
本文件规定了印刷线路组件用电气绝缘涂覆胶的术语和定义、分类、要求、试验方法、检验规则以及标志、包装、运输与贮存。 本文件适用于对印刷线路组件起到电气绝缘等防护作用的涂覆胶。
Electrical insulating adhesive for printed wiring assemblies
本文件规定了耐磨陶瓷粘接用结构胶的产品分类、技术要求、试验方法、检验规则、标志、包装、运输与贮存等内容。
Structural adhesive for wear-resistant ceramic bonding
BS EN ISO 29862 Self adhesive tapes - Determination of peel adhesion properties
Standard Specification for Reinforced and Plain Gummed Tape for Sealing and Securing
Standard Specification for Repositionable Pressure-Sensitive Flags
Structural adhesives. Determination of the pot life (working life) of multi-component adhesives
本文件规定了生物降解压敏胶及生物降解压敏胶带的技术要求、试验方法、检验规则以及包装、运输及储存要求
Biodegradation?pressure?sensitive?adhesive?and?tape
本文件给出了汽车内饰用反应型聚氨酯热熔胶的术语和定义,技术要求、实验方法、检验规则、包装、贮运和标志
Polyurethane Reactive Hot-melt Adhesive for Automotive Interior Parts
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号